[PATCH 0/3] Fixes for b43 and b43legacy

[PATCH 0/3] Fixes for b43 and b43legacy

[Larry Finger]

These 3 fixes should be applied as soon as possible. I understand that 3.13
will be released soon. As all 3 are marked for stable, inclusion in 3.14
will be satisfactory.

Larry
 

Larry Finger (3):
  b43: Fix lockdep splat
  b43: Fix oops if firmware is not available
  b43legacy: Fix oops if firmware is not available

 drivers/net/wireless/b43/main.c       | 24 +++++++++++++++---------
 drivers/net/wireless/b43legacy/main.c |  5 +++--
 2 files changed, 18 insertions(+), 11 deletions(-)

-- 
1.8.4

[PATCH 0/3] Fixes for b43 and b43legacy

[Larry Finger]

These 3 fixes should be applied as soon as possible. I understand that 3.13
will be released soon. As all 3 are marked for stable, inclusion in 3.14
will be satisfactory.

Larry
 

Larry Finger (3):
  b43: Fix lockdep splat
  b43: Fix oops if firmware is not available
  b43legacy: Fix oops if firmware is not available

 drivers/net/wireless/b43/main.c       | 24 +++++++++++++++---------
 drivers/net/wireless/b43legacy/main.c |  5 +++--
 2 files changed, 18 insertions(+), 11 deletions(-)

-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/3] b43: Fix oops if firmware is not available

[Larry Finger]

On openSUSE systems, the script that installs the firmware for b43 also
unloads and reloads the driver. When the firmware was not previously
available, the driver has stalled at a wait_for_completion(). When the
unload routine releases that hold, the driver encounters structures
that have already been deleted and generates a fatal condition. When
the user does a manual restart, the file system cleanup frequently
results in the firmware files being deleted and the user is never able
to install the firmware. The fix is to change the wait_for_completion()
with a wait_for_completion_timeout() with a 60 second wait period.

There is a potential race condition; however, the chances that less
than a minute has elapsed between the initial driver load and a
subsequent unload is very unlikely.

This patch also fixes a typo in a comment.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
---
 drivers/net/wireless/b43/main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 86b2030..5ce9ecb 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2150,12 +2150,13 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,
 			pr_err("Unable to load firmware\n");
 			return err;
 		}
-		/* stall here until fw ready */
-		wait_for_completion(&ctx->fw_load_complete);
+		/* stall here until fw ready or 60 sec elapses */
+		wait_for_completion_timeout(&ctx->fw_load_complete,
+					    msecs_to_jiffies(60000));
 		if (ctx->blob)
 			goto fw_ready;
 	/* On some ARM systems, the async request will fail, but the next sync
-	 * request works. For this reason, we dall through here
+	 * request works. For this reason, we fall through here
 	 */
 	}
 	err = request_firmware(&ctx->blob, ctx->fwname,
-- 
1.8.4

[PATCH 2/3] b43: Fix oops if firmware is not available

[Larry Finger]

On openSUSE systems, the script that installs the firmware for b43 also
unloads and reloads the driver. When the firmware was not previously
available, the driver has stalled at a wait_for_completion(). When the
unload routine releases that hold, the driver encounters structures
that have already been deleted and generates a fatal condition. When
the user does a manual restart, the file system cleanup frequently
results in the firmware files being deleted and the user is never able
to install the firmware. The fix is to change the wait_for_completion()
with a wait_for_completion_timeout() with a 60 second wait period.

There is a potential race condition; however, the chances that less
than a minute has elapsed between the initial driver load and a
subsequent unload is very unlikely.

This patch also fixes a typo in a comment.

Signed-off-by: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Cc: Stable <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
---
 drivers/net/wireless/b43/main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 86b2030..5ce9ecb 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2150,12 +2150,13 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,
 			pr_err("Unable to load firmware\n");
 			return err;
 		}
-		/* stall here until fw ready */
-		wait_for_completion(&ctx->fw_load_complete);
+		/* stall here until fw ready or 60 sec elapses */
+		wait_for_completion_timeout(&ctx->fw_load_complete,
+					    msecs_to_jiffies(60000));
 		if (ctx->blob)
 			goto fw_ready;
 	/* On some ARM systems, the async request will fail, but the next sync
-	 * request works. For this reason, we dall through here
+	 * request works. For this reason, we fall through here
 	 */
 	}
 	err = request_firmware(&ctx->blob, ctx->fwname,
-- 
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/3] b43: Fix oops if firmware is not available

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2219 bytes --]

On Sat, 2014-01-11 at 13:48 -0600, Larry Finger wrote:
> On openSUSE systems, the script that installs the firmware for b43 also
> unloads and reloads the driver. When the firmware was not previously
> available, the driver has stalled at a wait_for_completion(). When the
> unload routine releases that hold, the driver encounters structures
> that have already been deleted and generates a fatal condition. When
> the user does a manual restart, the file system cleanup frequently
> results in the firmware files being deleted and the user is never able
> to install the firmware. The fix is to change the wait_for_completion()
> with a wait_for_completion_timeout() with a 60 second wait period.
> 
> There is a potential race condition; however, the chances that less
> than a minute has elapsed between the initial driver load and a
> subsequent unload is very unlikely.

A minute-long race is 'unlikely' to be hit?  Seriously?!

Ben.

> This patch also fixes a typo in a comment.
> 
> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
> Cc: Stable <stable@vger.kernel.org>
> ---
>  drivers/net/wireless/b43/main.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
> index 86b2030..5ce9ecb 100644
> --- a/drivers/net/wireless/b43/main.c
> +++ b/drivers/net/wireless/b43/main.c
> @@ -2150,12 +2150,13 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,
>  			pr_err("Unable to load firmware\n");
>  			return err;
>  		}
> -		/* stall here until fw ready */
> -		wait_for_completion(&ctx->fw_load_complete);
> +		/* stall here until fw ready or 60 sec elapses */
> +		wait_for_completion_timeout(&ctx->fw_load_complete,
> +					    msecs_to_jiffies(60000));
>  		if (ctx->blob)
>  			goto fw_ready;
>  	/* On some ARM systems, the async request will fail, but the next sync
> -	 * request works. For this reason, we dall through here
> +	 * request works. For this reason, we fall through here
>  	 */
>  	}
>  	err = request_firmware(&ctx->blob, ctx->fwname,

-- 
Ben Hutchings
Quantity is no substitute for quality, but it's the only one we've got.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [PATCH 2/3] b43: Fix oops if firmware is not available

[Larry Finger]

On 01/11/2014 09:27 PM, Ben Hutchings wrote:
> On Sat, 2014-01-11 at 13:48 -0600, Larry Finger wrote:
>> On openSUSE systems, the script that installs the firmware for b43 also
>> unloads and reloads the driver. When the firmware was not previously
>> available, the driver has stalled at a wait_for_completion(). When the
>> unload routine releases that hold, the driver encounters structures
>> that have already been deleted and generates a fatal condition. When
>> the user does a manual restart, the file system cleanup frequently
>> results in the firmware files being deleted and the user is never able
>> to install the firmware. The fix is to change the wait_for_completion()
>> with a wait_for_completion_timeout() with a 60 second wait period.
>>
>> There is a potential race condition; however, the chances that less
>> than a minute has elapsed between the initial driver load and a
>> subsequent unload is very unlikely.
>
> A minute-long race is 'unlikely' to be hit?  Seriously?!

Ben,

If you force a reboot before the minute expires, nothing weird happens. The only 
race condition happens when the user has to log in, open a terminal, run a 
script that downloads 13.5 MiB of files from the Internet, and then executes the 
firmware extraction program. On my 10 Mbps external line and a 2 GHz CPU, that 
takes 32 s, plus any time to enter the password for a sudo operation. That was 
the basis for my conclusion that a race is unlikely.

What is the minimum time that should be allowed for a request_firmware_nowait() 
to respond? I know we had to go to asynchronous fw loading because the 
synchronous  version would timeout at 30 s.

Larry

Re: [PATCH 2/3] b43: Fix oops if firmware is not available

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2229 bytes --]

On Sat, 2014-01-11 at 21:55 -0600, Larry Finger wrote:
> On 01/11/2014 09:27 PM, Ben Hutchings wrote:
> > On Sat, 2014-01-11 at 13:48 -0600, Larry Finger wrote:
> >> On openSUSE systems, the script that installs the firmware for b43 also
> >> unloads and reloads the driver. When the firmware was not previously
> >> available, the driver has stalled at a wait_for_completion(). When the
> >> unload routine releases that hold, the driver encounters structures
> >> that have already been deleted and generates a fatal condition. When
> >> the user does a manual restart, the file system cleanup frequently
> >> results in the firmware files being deleted and the user is never able
> >> to install the firmware. The fix is to change the wait_for_completion()
> >> with a wait_for_completion_timeout() with a 60 second wait period.
> >>
> >> There is a potential race condition; however, the chances that less
> >> than a minute has elapsed between the initial driver load and a
> >> subsequent unload is very unlikely.
> >
> > A minute-long race is 'unlikely' to be hit?  Seriously?!
> 
> Ben,
> 
> If you force a reboot before the minute expires, nothing weird happens. The only 
> race condition happens when the user has to

...remove the module.  Exactly how the bug reporter triggered module
removal seems irrelevant.

> log in, open a terminal, run a 
> script that downloads 13.5 MiB of files from the Internet, and then executes the 
> firmware extraction program. On my 10 Mbps external line and a 2 GHz CPU, that 
> takes 32 s, plus any time to enter the password for a sudo operation. That was 
> the basis for my conclusion that a race is unlikely.
> 
> What is the minimum time that should be allowed for a request_firmware_nowait() 
> to respond? I know we had to go to asynchronous fw loading because the 
> synchronous  version would timeout at 30 s.

You could switch back to synchronous firmware loading soon, as it's not
going to support a usermode helper any more.

But until then, the proper fix for this is going to be to cancel the
waiter earlier in teardown.

Ben.

-- 
Ben Hutchings
Quantity is no substitute for quality, but it's the only one we've got.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [PATCH 2/3] b43: Fix oops if firmware is not available

[Johannes Berg]

On Sun, 2014-01-12 at 04:24 +0000, Ben Hutchings wrote:

> You could switch back to synchronous firmware loading soon, as it's not
> going to support a usermode helper any more.
> 
> But until then, the proper fix for this is going to be to cancel the
> waiter earlier in teardown.

I don't think we found a way when we looked at this, and instead made
the module unload wait for the request_firmware callback to come back
(see all users of the request_firmware_complete struct member in
iwlwifi/iwl-drv.c)

johannes

Re: [PATCH 2/3] b43: Fix oops if firmware is not available

[Johannes Berg]

On Sun, 2014-01-12 at 04:24 +0000, Ben Hutchings wrote:

> You could switch back to synchronous firmware loading soon, as it's not
> going to support a usermode helper any more.
> 
> But until then, the proper fix for this is going to be to cancel the
> waiter earlier in teardown.

I don't think we found a way when we looked at this, and instead made
the module unload wait for the request_firmware callback to come back
(see all users of the request_firmware_complete struct member in
iwlwifi/iwl-drv.c)

johannes

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/3] b43: Fix oops if firmware is not available

[Larry Finger]

On 01/11/2014 10:24 PM, Ben Hutchings wrote:
> On Sat, 2014-01-11 at 21:55 -0600, Larry Finger wrote:
>> On 01/11/2014 09:27 PM, Ben Hutchings wrote:
>>> On Sat, 2014-01-11 at 13:48 -0600, Larry Finger wrote:
>>>> On openSUSE systems, the script that installs the firmware for b43 also
>>>> unloads and reloads the driver. When the firmware was not previously
>>>> available, the driver has stalled at a wait_for_completion(). When the
>>>> unload routine releases that hold, the driver encounters structures
>>>> that have already been deleted and generates a fatal condition. When
>>>> the user does a manual restart, the file system cleanup frequently
>>>> results in the firmware files being deleted and the user is never able
>>>> to install the firmware. The fix is to change the wait_for_completion()
>>>> with a wait_for_completion_timeout() with a 60 second wait period.
>>>>
>>>> There is a potential race condition; however, the chances that less
>>>> than a minute has elapsed between the initial driver load and a
>>>> subsequent unload is very unlikely.
>>>
>>> A minute-long race is 'unlikely' to be hit?  Seriously?!
>>
>> Ben,
>>
>> If you force a reboot before the minute expires, nothing weird happens. The only
>> race condition happens when the user has to
>
> ...remove the module.  Exactly how the bug reporter triggered module
> removal seems irrelevant.
>
>> log in, open a terminal, run a
>> script that downloads 13.5 MiB of files from the Internet, and then executes the
>> firmware extraction program. On my 10 Mbps external line and a 2 GHz CPU, that
>> takes 32 s, plus any time to enter the password for a sudo operation. That was
>> the basis for my conclusion that a race is unlikely.
>>
>> What is the minimum time that should be allowed for a request_firmware_nowait()
>> to respond? I know we had to go to asynchronous fw loading because the
>> synchronous  version would timeout at 30 s.
>
> You could switch back to synchronous firmware loading soon, as it's not
> going to support a usermode helper any more.
>
> But until then, the proper fix for this is going to be to cancel the
> waiter earlier in teardown.

After closer inspection, it turns out the waiter was never canceled in the 
teardown. I have had to move the completion struct to make it available at 
module exit, but now I have a better fix.

Thanks for the critical review.

Larry

[PATCH 3/3] b43legacy: Fix oops if firmware is not available

[Larry Finger]

On openSUSE systems, the script that installs the firmware for b43legacy
also unloads and reloads the driver. When the firmware was not previously
available, the driver has stalled at a wait_for_completion(). When the
unload routine releases that hold, the driver encounters structures
that have already been deleted and generates a fatal condition. When
the user does a manual restart, the file system cleanup frequently
results in the firmware files being deleted and the user is never able
to install the firmware. The fix is to change the wait_for_completion()
with a wait_for_completion_timeout() with a 60 second wait period.

There is a potential race condition; however, the chances that less
than a minute has elapsed between the initial driver load and a
subsequent unload is very unlikely.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
---
 drivers/net/wireless/b43legacy/main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 5726688..bd5f142 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1546,8 +1546,9 @@ static int do_request_fw(struct b43legacy_wldev *dev,
 			b43legacyerr(dev->wl, "Unable to load firmware\n");
 			return err;
 		}
-		/* stall here until fw ready */
-		wait_for_completion(&dev->fw_load_complete);
+		/* stall here until fw ready or 60 sec elapses */
+		wait_for_completion_timeout(&dev->fw_load_complete,
+					    msecs_to_jiffies(60000));
 		if (!dev->fwp)
 			err = -EINVAL;
 		*fw = dev->fwp;
-- 
1.8.4