From: Minkyu Kang <mk7.kang@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function
Date: Thu, 16 Jan 2014 16:50:37 +0900 [thread overview]
Message-ID: <52D78F4D.5020208@samsung.com> (raw)
In-Reply-To: <20140115142759.66afd1ce@songinha-Samsung-DeskTop-System>
On 15/01/14 14:27, Inha Song wrote:
> Use setbits/clrbits macro instead of readl/writel function
>
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com>
> ---
> Changes for v2:
> - Coding Style cleanup
> - add signed-off-by
>
> arch/arm/cpu/armv7/exynos/clock.c | 82 +++++++++----------------------------
> 1 file changed, 20 insertions(+), 62 deletions(-)
> /*
> * CLK_SRC_LCD0
> @@ -1085,10 +1070,7 @@ void exynos4_set_lcd_clk(void)
> * MIPI0_SEL [12:15]
> * set lcd0 src clock 0x6: SCLK_MPLL
> */
> - cfg = readl(&clk->src_lcd0);
> - cfg &= ~(0xf);
> - cfg |= 0x6;
> - writel(cfg, &clk->src_lcd0);
> + clrsetbits_le32(&clk->src_lcd0, 0x9, 0x6);
0x9? It seems to be 0xf.
>
> /*
> * CLK_GATE_IP_LCD0
> @@ -1100,9 +1082,7 @@ void exynos4_set_lcd_clk(void)
> * CLK_PPMULCD0 [5]
> * Gating all clocks for FIMD0
> */
> - cfg = readl(&clk->gate_ip_lcd0);
> - cfg |= 1 << 0;
> - writel(cfg, &clk->gate_ip_lcd0);
> + setbits_le32(&clk->gate_ip_lcd0, 1 << 0);
>
> /*
> * CLK_DIV_LCD0
> @@ -1114,16 +1094,13 @@ void exynos4_set_lcd_clk(void)
> * MIPI0_PRE_RATIO [23:20]
> * set fimd ratio
> */
> - cfg &= ~(0xf);
> - cfg |= 0x1;
> - writel(cfg, &clk->div_lcd0);
> + clrsetbits_le32(&clk->div_lcd0, 0xe, 0x1);
ditto.
> }
>
> void exynos5_set_lcd_clk(void)
> {
> struct exynos5_clock *clk =
> (struct exynos5_clock *)samsung_get_base_clock();
> - unsigned int cfg = 0;
>
> /*
> * CLK_GATE_BLOCK
> @@ -1135,9 +1112,7 @@ void exynos5_set_lcd_clk(void)
> * CLK_LCD1 [5]
> * CLK_GPS [7]
> */
> - cfg = readl(&clk->gate_block);
> - cfg |= 1 << 4;
> - writel(cfg, &clk->gate_block);
> + setbits_le32(&clk->gate_block, 1 << 4);
>
> /*
> * CLK_SRC_LCD0
> @@ -1147,10 +1122,7 @@ void exynos5_set_lcd_clk(void)
> * MIPI0_SEL [12:15]
> * set lcd0 src clock 0x6: SCLK_MPLL
> */
> - cfg = readl(&clk->src_disp1_0);
> - cfg &= ~(0xf);
> - cfg |= 0x6;
> - writel(cfg, &clk->src_disp1_0);
> + clrsetbits_le32(&clk->src_disp1_0, 0x9, 0x6);
ditto.
>
> /*
> * CLK_GATE_IP_LCD0
> @@ -1162,9 +1134,7 @@ void exynos5_set_lcd_clk(void)
> * CLK_PPMULCD0 [5]
> * Gating all clocks for FIMD0
> */
> - cfg = readl(&clk->gate_ip_disp1);
> - cfg |= 1 << 0;
> - writel(cfg, &clk->gate_ip_disp1);
> + setbits_le32(&clk->gate_ip_disp1, 1 << 0);
>
> /*
> * CLK_DIV_LCD0
> @@ -1176,16 +1146,13 @@ void exynos5_set_lcd_clk(void)
> * MIPI0_PRE_RATIO [23:20]
> * set fimd ratio
> */
> - cfg &= ~(0xf);
> - cfg |= 0x0;
> - writel(cfg, &clk->div_disp1_0);
> + clrbits_le32(&clk->div_disp1_0, 0xf);
> }
>
> void exynos4_set_mipi_clk(void)
> {
> struct exynos4_clock *clk =
> (struct exynos4_clock *)samsung_get_base_clock();
> - unsigned int cfg = 0;
>
> /*
> * CLK_SRC_LCD0
> @@ -1195,10 +1162,7 @@ void exynos4_set_mipi_clk(void)
> * MIPI0_SEL [12:15]
> * set mipi0 src clock 0x6: SCLK_MPLL
> */
> - cfg = readl(&clk->src_lcd0);
> - cfg &= ~(0xf << 12);
> - cfg |= (0x6 << 12);
> - writel(cfg, &clk->src_lcd0);
> + clrsetbits_le32(&clk->src_lcd0, 0x9 << 12, 0x6 << 12);
ditto.
>
> /*
> * CLK_SRC_MASK_LCD0
> @@ -1208,9 +1172,7 @@ void exynos4_set_mipi_clk(void)
> * MIPI0_MASK [12]
> * set src mask mipi0 0x1: Unmask
> */
> - cfg = readl(&clk->src_mask_lcd0);
> - cfg |= (0x1 << 12);
> - writel(cfg, &clk->src_mask_lcd0);
> + setbits_le32(&clk->src_mask_lcd0, 0x1 << 12);
>
> /*
> * CLK_GATE_IP_LCD0
> @@ -1222,9 +1184,7 @@ void exynos4_set_mipi_clk(void)
> * CLK_PPMULCD0 [5]
> * Gating all clocks for MIPI0
> */
> - cfg = readl(&clk->gate_ip_lcd0);
> - cfg |= 1 << 3;
> - writel(cfg, &clk->gate_ip_lcd0);
> + setbits_le32(&clk->gate_ip_lcd0, 1 << 3);
>
> /*
> * CLK_DIV_LCD0
> @@ -1236,9 +1196,7 @@ void exynos4_set_mipi_clk(void)
> * MIPI0_PRE_RATIO [23:20]
> * set mipi ratio
> */
> - cfg &= ~(0xf << 16);
> - cfg |= (0x1 << 16);
> - writel(cfg, &clk->div_lcd0);
> + clrsetbits_le32(&clk->div_lcd0, 0xe << 16, 0x1 << 16);
ditto.
> }
>
> /*
>
Thanks,
Minkyu Kang.
next prev parent reply other threads:[~2014-01-16 7:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-15 5:27 [U-Boot] [PATCH v2] arm: exynos: change to use clrbits macro instead of readl/writel function Inha Song
2014-01-15 5:40 ` Jaehoon Chung
2014-01-15 16:33 ` Gerhard Sittig
2014-01-16 7:50 ` Minkyu Kang [this message]
2014-01-16 8:20 ` Inha Song
2014-01-16 8:27 ` Jaehoon Chung
2014-01-16 8:34 ` Minkyu Kang
2014-01-16 9:04 ` Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52D78F4D.5020208@samsung.com \
--to=mk7.kang@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.