All of lore.kernel.org
 help / color / mirror / Atom feed
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER
Date: Thu, 16 Jan 2014 19:42:10 +0100	[thread overview]
Message-ID: <52D82802.6090104@gmail.com> (raw)
In-Reply-To: <20140116165347.GI29184@titan.lakedaemon.net>

On 01/16/2014 05:53 PM, Jason Cooper wrote:
> On Thu, Jan 16, 2014 at 04:51:27PM +0000, Ian Campbell wrote:
>> On Thu, 2014-01-16 at 11:48 -0500, Jason Cooper wrote:
>>> Sebastian,
>>>
>>> On Thu, Jan 16, 2014 at 09:10:31AM +0100, Sebastian Hesselbarth wrote:
>>>> DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip
>>>> driver. As expected for irqchip drivers, it uses a C-style
>>>> interrupt handler and therefore selects MULTI_IRQ_HANDLER.
>>>>
>>>> Now, compiling a kernel with both non-DT and DT support enabled,
>>>> selecting MULTI_IRQ_HANDLER will break ASM irq handler used by
>>>> non-DT boards.
>>>>
>>>> Therefore, we provide a C-style irq handler even for non-DT boards,
>>>> if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler
>>>> in orion_irq_init this is transparent to all non-DT board files.
>>>>
>>>> While the regression report was filed on Marvell Kirkwood, also
>>>> Marvell Dove non-DT boards are affected and fixed by this patch.
>>>>
>>>> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>>>> Tested-by: Ian Campbell <ijc@hellion.org.uk>
>>>> Reported-by: Ian Campbell <ijc@hellion.org.uk>
>>>> Fixes: 2326f04321a9 ("ARM: kirkwood: convert to DT irqchip and clocksource")
>>>> Fixes: f07d73e33d0e ("ARM: dove: convert to DT irqchip and clocksource")
>>>> ---
>>>> Compared to the two patch version sent on Ian's regression report,
>>>> I cooked this down to a single patch only touching plat-orion/irq.c.
>>>> I also dropped Orion5x and MV78x00, as they not yet select MULTI_IRQ_HANDLER
>>>> at all. Instead I added a comment about taking care of them, as soon as
>>>> they move over to an irqchip driver themselves.
>>>>
>>>> I have not yet Cc'ed this patch to -stable to get some discussion and
>>>> an Acked-by from Jason or Andrew, too.
>>>>
>>>> Cc: Jason Cooper <jason@lakedaemon.net>
>>>> Cc: Andrew Lunn <andrew@lunn.ch>
>>>> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>>>> Cc: Russell King <linux@arm.linux.org.uk>
>>>> Cc: Ian Campbell <ijc@hellion.org.uk>
>>>> Cc: linux-arm-kernel at lists.infradead.org
>>>> Cc: linux-kernel at vger.kernel.org
>>>> ---
>>>>   arch/arm/plat-orion/irq.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
>>>>   1 file changed, 47 insertions(+)
>>>
>>> Applied to mvebu/fixes with Andrew's Ack.  It's too late for v3.13, so
>>> it'll be the first thing sent for v3.14.
>>
>> Please can it also be tagged for stable backport to 3.12+3.13.
>
> Yes, I forgot to mention it, but that is already done. ;-)

Ok, thanks!

Out of curiosity, does that adding the Cc tag to the commit queue
it automatically as soon as it will be pulled by Linus?

@Ian: Thanks for hunting this down, please keep bothering us with
bug reports :)

Sebastian

WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Jason Cooper <jason@lakedaemon.net>, Ian Campbell <ijc@hellion.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Russell King <linux@arm.linux.org.uk>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER
Date: Thu, 16 Jan 2014 19:42:10 +0100	[thread overview]
Message-ID: <52D82802.6090104@gmail.com> (raw)
In-Reply-To: <20140116165347.GI29184@titan.lakedaemon.net>

On 01/16/2014 05:53 PM, Jason Cooper wrote:
> On Thu, Jan 16, 2014 at 04:51:27PM +0000, Ian Campbell wrote:
>> On Thu, 2014-01-16 at 11:48 -0500, Jason Cooper wrote:
>>> Sebastian,
>>>
>>> On Thu, Jan 16, 2014 at 09:10:31AM +0100, Sebastian Hesselbarth wrote:
>>>> DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip
>>>> driver. As expected for irqchip drivers, it uses a C-style
>>>> interrupt handler and therefore selects MULTI_IRQ_HANDLER.
>>>>
>>>> Now, compiling a kernel with both non-DT and DT support enabled,
>>>> selecting MULTI_IRQ_HANDLER will break ASM irq handler used by
>>>> non-DT boards.
>>>>
>>>> Therefore, we provide a C-style irq handler even for non-DT boards,
>>>> if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler
>>>> in orion_irq_init this is transparent to all non-DT board files.
>>>>
>>>> While the regression report was filed on Marvell Kirkwood, also
>>>> Marvell Dove non-DT boards are affected and fixed by this patch.
>>>>
>>>> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>>>> Tested-by: Ian Campbell <ijc@hellion.org.uk>
>>>> Reported-by: Ian Campbell <ijc@hellion.org.uk>
>>>> Fixes: 2326f04321a9 ("ARM: kirkwood: convert to DT irqchip and clocksource")
>>>> Fixes: f07d73e33d0e ("ARM: dove: convert to DT irqchip and clocksource")
>>>> ---
>>>> Compared to the two patch version sent on Ian's regression report,
>>>> I cooked this down to a single patch only touching plat-orion/irq.c.
>>>> I also dropped Orion5x and MV78x00, as they not yet select MULTI_IRQ_HANDLER
>>>> at all. Instead I added a comment about taking care of them, as soon as
>>>> they move over to an irqchip driver themselves.
>>>>
>>>> I have not yet Cc'ed this patch to -stable to get some discussion and
>>>> an Acked-by from Jason or Andrew, too.
>>>>
>>>> Cc: Jason Cooper <jason@lakedaemon.net>
>>>> Cc: Andrew Lunn <andrew@lunn.ch>
>>>> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>>>> Cc: Russell King <linux@arm.linux.org.uk>
>>>> Cc: Ian Campbell <ijc@hellion.org.uk>
>>>> Cc: linux-arm-kernel@lists.infradead.org
>>>> Cc: linux-kernel@vger.kernel.org
>>>> ---
>>>>   arch/arm/plat-orion/irq.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
>>>>   1 file changed, 47 insertions(+)
>>>
>>> Applied to mvebu/fixes with Andrew's Ack.  It's too late for v3.13, so
>>> it'll be the first thing sent for v3.14.
>>
>> Please can it also be tagged for stable backport to 3.12+3.13.
>
> Yes, I forgot to mention it, but that is already done. ;-)

Ok, thanks!

Out of curiosity, does that adding the Cc tag to the commit queue
it automatically as soon as it will be pulled by Linus?

@Ian: Thanks for hunting this down, please keep bothering us with
bug reports :)

Sebastian

  reply	other threads:[~2014-01-16 18:42 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-15  8:40 v3.12 regression from "ARM: kirkwood: convert to DT irqchip and clocksource" on non-DT kirkwood platforms Ian Campbell
2014-01-15  9:15 ` Sebastian Hesselbarth
2014-01-15  9:26   ` Ian Campbell
2014-01-15 19:54     ` Sebastian Hesselbarth
2014-01-15 20:15       ` Ian Campbell
2014-01-16  8:10 ` [PATCH] ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Sebastian Hesselbarth
2014-01-16  8:10   ` Sebastian Hesselbarth
2014-01-16 15:19   ` Andrew Lunn
2014-01-16 15:19     ` Andrew Lunn
2014-01-16 16:48   ` Jason Cooper
2014-01-16 16:48     ` Jason Cooper
2014-01-16 16:51     ` Ian Campbell
2014-01-16 16:51       ` Ian Campbell
2014-01-16 16:53       ` Jason Cooper
2014-01-16 16:53         ` Jason Cooper
2014-01-16 18:42         ` Sebastian Hesselbarth [this message]
2014-01-16 18:42           ` Sebastian Hesselbarth
2014-01-16 18:49           ` Jason Cooper
2014-01-16 18:49             ` Jason Cooper
2014-01-20 21:53             ` Ian Campbell
2014-01-20 21:53               ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52D82802.6090104@gmail.com \
    --to=sebastian.hesselbarth@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.