From: Nishanth Menon <nm@ti.com>
To: Kevin Hilman <khilman@linaro.org>,
Mike Turquette <mturquette@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>,
devicetree@vger.kernel.org, paul@pwsan.com, rnayak@ti.com,
balbi@ti.com, Tero Kristo <t-kristo@ti.com>,
bcousson@baylibre.com, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Olof Johansson <olof@lixom.net>
Subject: Re: [PATCHv13 00/40] ARM: TI SoC clock DT conversion
Date: Fri, 17 Jan 2014 14:02:02 -0600 [thread overview]
Message-ID: <52D98C3A.8020501@ti.com> (raw)
In-Reply-To: <87r486mrh5.fsf@linaro.org>
On 01/17/2014 11:46 AM, Kevin Hilman wrote:
> Mike Turquette <mturquette@linaro.org> writes:
>
> [...]
>
>> I took Tony's advice and fast-forwarded clk-next to -rc7 and applied
>> Tero's series. This includes the AM3517 bits now. I've pushed this
>> branch to clk-next-omap (force update) on my Linaro mirror. Can you do a
>> final sanity test before I merge this into clk-next?
>
> I merged clk-next-omap into next-20140117 and build/boot tested
> omap2plus_defconfig, multi_v7_defconfig and
> multi_v7_defconfig+CONFIG_LPAE=y and all passed a basic boot test for
> omap5uevm.
>
> I'll add OMAP5 to the automated boot testing starting with the next
> linux-next.
Here are my logs for the similar configuration(with few patches for
legacy boot):
next-db23a6c + next-20140117 (omap2plus_defconfig)
1: am335x-evm: Boot PASS: http://slexy.org/raw/s20pGXG1jF
2: am335x-sk: Boot PASS: http://slexy.org/raw/s2ViUqyxYc
3: am3517-evm: Boot PASS: http://slexy.org/raw/s29qMTk2mS
4: am37x-evm: Boot PASS: http://slexy.org/raw/s20aZ0oDHS
5: beag: Boot PASS: http://slexy.org/raw/s2DAKDwqRm
6: bone: Boot PASS: http://slexy.org/raw/s215UVEmq2
7: crane: No Image built - Missing platform support?: (pending
merge from Benoit)
8: dra7: Boot PASS: http://slexy.org/raw/s2CbtBGGxE
9: ldp: Boot FAIL: http://slexy.org/raw/s20MOKNvPG
(been seeing this behavior on and off for some days now.. not really a
regression due to this series - need to debug this - could be setup
issues).
10: panda: Boot PASS: http://slexy.org/raw/s20RHdfXjS
11: sdp2430: Boot PASS: http://slexy.org/raw/s21fR9cQap
12: sdp3430: Boot PASS: http://slexy.org/raw/s209eZfYlQ
13: sdp4430: Boot PASS: http://slexy.org/raw/s21jemvEcd
14: uevm: Boot PASS: http://slexy.org/raw/s20OumuRI8
TOTAL = 14 boards, Booted Boards = 12, No Boot boards = 2
clk-next-db23a6c + next-20140117 (multi_v7_defconfig)
1: am335x-evm: Boot PASS: http://slexy.org/raw/s21kek3KDX
2: am335x-sk: Boot PASS: http://slexy.org/raw/s20b6Ypnpr
3: am3517-evm: Boot PASS: http://slexy.org/raw/s200aHOMA1
4: am37x-evm: Boot PASS: http://slexy.org/raw/s2QwHWtLbB
5: beag: Boot PASS: http://slexy.org/raw/s2120qe2nJ
6: bone: Boot PASS: http://slexy.org/raw/s21SnQH1AY
7: crane: No Image built - Missing platform support?:
8: dra7: Boot FAIL: http://slexy.org/raw/s20HxBFzIr
missing DRA7 in multi_v7
9: ldp: Boot PASS: http://slexy.org/raw/s21vjb9GeV
10: panda: Boot FAIL: http://slexy.org/raw/s2WahEfqVw
kevin already reported this for CPU_IDLE enable
11: sdp2430: Boot FAIL: http://slexy.org/raw/s2ADmtqRhq
* multi_v7 does not boot v6 based boards
12: sdp3430: Boot PASS: http://slexy.org/raw/s2qM9hxrfi
13: sdp4430: Boot PASS: http://slexy.org/raw/s2ubbIBRA7
14: uevm: Boot PASS: http://slexy.org/raw/s2Y9xESvfH
TOTAL = 14 boards, Booted Boards = 10, No Boot boards = 4
clk-next-db23a6c + next-20140117 (multi_v7_defconfig + CONFIG_LPAE=y)
1: am335x-evm: Boot PASS: http://slexy.org/raw/s26sCQ0zqh
2: am335x-sk: Boot PASS: http://slexy.org/raw/s20BDyQWdB
3: am3517-evm: Boot PASS: http://slexy.org/raw/s21OPwGNo1
4: am37x-evm: Boot PASS: http://slexy.org/raw/s20tpjF0ri
5: beag: Boot PASS: http://slexy.org/raw/s2jzkyRVaS
6: bone: Boot PASS: http://slexy.org/raw/s20XodcZtZ
7: crane: No Image built - Missing platform support?:
8: dra7: Boot FAIL: http://slexy.org/raw/s21cv8ni1H
missing DRA7 in multi_v7
9: ldp: Boot PASS: http://slexy.org/raw/s22x4lqV3F
10: panda: Boot FAIL: http://slexy.org/raw/s200ETyoTB
kevin already reported this for CPU_IDLE enable
11: sdp2430: Boot FAIL: http://slexy.org/raw/s2lw3baFwx
* multi_v7 does not boot v6 based boards
12: sdp3430: Boot PASS: http://slexy.org/raw/s21i0TdsYs
13: sdp4430: Boot PASS: http://slexy.org/raw/s2DaYv6GVp
14: uevm: Boot PASS: http://slexy.org/raw/s2Q5IdWfMQ
TOTAL = 14 boards, Booted Boards = 10, No Boot boards = 4
--
Regards,
Nishanth Menon
WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv13 00/40] ARM: TI SoC clock DT conversion
Date: Fri, 17 Jan 2014 14:02:02 -0600 [thread overview]
Message-ID: <52D98C3A.8020501@ti.com> (raw)
In-Reply-To: <87r486mrh5.fsf@linaro.org>
On 01/17/2014 11:46 AM, Kevin Hilman wrote:
> Mike Turquette <mturquette@linaro.org> writes:
>
> [...]
>
>> I took Tony's advice and fast-forwarded clk-next to -rc7 and applied
>> Tero's series. This includes the AM3517 bits now. I've pushed this
>> branch to clk-next-omap (force update) on my Linaro mirror. Can you do a
>> final sanity test before I merge this into clk-next?
>
> I merged clk-next-omap into next-20140117 and build/boot tested
> omap2plus_defconfig, multi_v7_defconfig and
> multi_v7_defconfig+CONFIG_LPAE=y and all passed a basic boot test for
> omap5uevm.
>
> I'll add OMAP5 to the automated boot testing starting with the next
> linux-next.
Here are my logs for the similar configuration(with few patches for
legacy boot):
next-db23a6c + next-20140117 (omap2plus_defconfig)
1: am335x-evm: Boot PASS: http://slexy.org/raw/s20pGXG1jF
2: am335x-sk: Boot PASS: http://slexy.org/raw/s2ViUqyxYc
3: am3517-evm: Boot PASS: http://slexy.org/raw/s29qMTk2mS
4: am37x-evm: Boot PASS: http://slexy.org/raw/s20aZ0oDHS
5: beag: Boot PASS: http://slexy.org/raw/s2DAKDwqRm
6: bone: Boot PASS: http://slexy.org/raw/s215UVEmq2
7: crane: No Image built - Missing platform support?: (pending
merge from Benoit)
8: dra7: Boot PASS: http://slexy.org/raw/s2CbtBGGxE
9: ldp: Boot FAIL: http://slexy.org/raw/s20MOKNvPG
(been seeing this behavior on and off for some days now.. not really a
regression due to this series - need to debug this - could be setup
issues).
10: panda: Boot PASS: http://slexy.org/raw/s20RHdfXjS
11: sdp2430: Boot PASS: http://slexy.org/raw/s21fR9cQap
12: sdp3430: Boot PASS: http://slexy.org/raw/s209eZfYlQ
13: sdp4430: Boot PASS: http://slexy.org/raw/s21jemvEcd
14: uevm: Boot PASS: http://slexy.org/raw/s20OumuRI8
TOTAL = 14 boards, Booted Boards = 12, No Boot boards = 2
clk-next-db23a6c + next-20140117 (multi_v7_defconfig)
1: am335x-evm: Boot PASS: http://slexy.org/raw/s21kek3KDX
2: am335x-sk: Boot PASS: http://slexy.org/raw/s20b6Ypnpr
3: am3517-evm: Boot PASS: http://slexy.org/raw/s200aHOMA1
4: am37x-evm: Boot PASS: http://slexy.org/raw/s2QwHWtLbB
5: beag: Boot PASS: http://slexy.org/raw/s2120qe2nJ
6: bone: Boot PASS: http://slexy.org/raw/s21SnQH1AY
7: crane: No Image built - Missing platform support?:
8: dra7: Boot FAIL: http://slexy.org/raw/s20HxBFzIr
missing DRA7 in multi_v7
9: ldp: Boot PASS: http://slexy.org/raw/s21vjb9GeV
10: panda: Boot FAIL: http://slexy.org/raw/s2WahEfqVw
kevin already reported this for CPU_IDLE enable
11: sdp2430: Boot FAIL: http://slexy.org/raw/s2ADmtqRhq
* multi_v7 does not boot v6 based boards
12: sdp3430: Boot PASS: http://slexy.org/raw/s2qM9hxrfi
13: sdp4430: Boot PASS: http://slexy.org/raw/s2ubbIBRA7
14: uevm: Boot PASS: http://slexy.org/raw/s2Y9xESvfH
TOTAL = 14 boards, Booted Boards = 10, No Boot boards = 4
clk-next-db23a6c + next-20140117 (multi_v7_defconfig + CONFIG_LPAE=y)
1: am335x-evm: Boot PASS: http://slexy.org/raw/s26sCQ0zqh
2: am335x-sk: Boot PASS: http://slexy.org/raw/s20BDyQWdB
3: am3517-evm: Boot PASS: http://slexy.org/raw/s21OPwGNo1
4: am37x-evm: Boot PASS: http://slexy.org/raw/s20tpjF0ri
5: beag: Boot PASS: http://slexy.org/raw/s2jzkyRVaS
6: bone: Boot PASS: http://slexy.org/raw/s20XodcZtZ
7: crane: No Image built - Missing platform support?:
8: dra7: Boot FAIL: http://slexy.org/raw/s21cv8ni1H
missing DRA7 in multi_v7
9: ldp: Boot PASS: http://slexy.org/raw/s22x4lqV3F
10: panda: Boot FAIL: http://slexy.org/raw/s200ETyoTB
kevin already reported this for CPU_IDLE enable
11: sdp2430: Boot FAIL: http://slexy.org/raw/s2lw3baFwx
* multi_v7 does not boot v6 based boards
12: sdp3430: Boot PASS: http://slexy.org/raw/s21i0TdsYs
13: sdp4430: Boot PASS: http://slexy.org/raw/s2DaYv6GVp
14: uevm: Boot PASS: http://slexy.org/raw/s2Q5IdWfMQ
TOTAL = 14 boards, Booted Boards = 10, No Boot boards = 4
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-01-17 20:02 UTC|newest]
Thread overview: 171+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-09 14:00 [PATCHv13 00/40] ARM: TI SoC clock DT conversion Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 01/40] CLK: TI: add DT alias clock registration mechanism Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 02/40] CLK: ti: add init support for clock IP blocks Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 03/40] CLK: TI: Add DPLL clock support Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 04/40] CLK: TI: add autoidle support Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 05/40] clk: ti: add composite clock support Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 06/40] CLK: ti: add support for ti divider-clock Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 07/40] clk: ti: add support for TI fixed factor clock Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 09/40] CLK: TI: add support for clockdomain binding Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 10/40] clk: ti: add support for basic mux clock Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 11/40] CLK: TI: add omap4 clock init file Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 12/40] CLK: TI: add omap5 " Tero Kristo
2014-01-09 14:00 ` Tero Kristo
[not found] ` <1389276051-1326-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2014-01-09 14:00 ` [PATCHv13 08/40] CLK: TI: add support for gate clock Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 13/40] CLK: TI: omap5: Initialize USB_DPLL at boot Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 14/40] CLK: TI: DRA7: Add APLL support Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 17/40] CLK: TI: add interface clock support for OMAP3 Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 19/40] CLK: TI: add am43xx clock init file Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 21/40] ARM: dts: omap5 clock data Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 26/40] ARM: dts: am33xx " Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 27/40] ARM: dts: omap3 " Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-20 18:00 ` Sebastian Reichel
2014-01-20 18:00 ` Sebastian Reichel
2014-01-21 7:42 ` Tero Kristo
2014-01-21 7:42 ` Tero Kristo
2014-01-21 14:37 ` [PATCH] ARM: dts: omap3 clocks: simplify ssi aliases Sebastian Reichel
2014-02-13 22:49 ` Tony Lindgren
2014-02-14 1:25 ` Sebastian Reichel
2014-02-14 13:47 ` Tero Kristo
2014-02-28 22:03 ` Tony Lindgren
2014-01-09 14:00 ` [PATCHv13 28/40] ARM: dts: AM35xx: use DT clock data Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 29/40] ARM: dts: am43xx " Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 30/40] ARM: OMAP2+: clock: add support for indexed memmaps Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 33/40] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 35/40] ARM: OMAP2+: io: use new clock init API Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 36/40] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 37/40] ARM: OMAP: DRA7: Enable clock init Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 38/40] ARM: AM43xx: " Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 39/40] ARM: AM33xx: remove old clock data and link in new clock init code Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 40/40] ARM: OMAP3: use DT clock init if DT data is available Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 22:23 ` [PATCHv13 00/40] ARM: TI SoC clock DT conversion Mike Turquette
2014-01-09 22:23 ` Mike Turquette
2014-01-10 18:53 ` Tony Lindgren
2014-01-10 18:53 ` Tony Lindgren
2014-01-11 9:54 ` Tero Kristo
2014-01-11 9:54 ` Tero Kristo
2014-01-12 0:36 ` Tony Lindgren
2014-01-12 0:36 ` Tony Lindgren
2014-01-09 14:00 ` [PATCHv13 15/40] CLK: TI: add dra7 clock init file Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 16/40] CLK: TI: add am33xx " Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 18/40] CLK: TI: add omap3 " Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 20/40] ARM: dts: omap4 clock data Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 22/40] ARM: dts: dra7 " Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 23/40] ARM: dts: clk: Add apll related clocks Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 24/40] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 25/40] ARM: dts: DRA7: Add PCIe related clock nodes Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 31/40] ARM: OMAP2+: clock: use driver API instead of direct memory read/write Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 32/40] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 14:00 ` [PATCHv13 34/40] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT Tero Kristo
2014-01-09 14:00 ` Tero Kristo
2014-01-09 17:22 ` [PATCHv13 00/40] ARM: TI SoC clock DT conversion Felipe Balbi
2014-01-09 17:22 ` Felipe Balbi
2014-01-09 18:40 ` Felipe Balbi
2014-01-09 18:40 ` Felipe Balbi
2014-01-09 18:43 ` Felipe Balbi
2014-01-09 18:43 ` Felipe Balbi
2014-01-09 21:22 ` Nishanth Menon
2014-01-09 21:22 ` Nishanth Menon
2014-01-09 23:15 ` Felipe Balbi
2014-01-09 23:15 ` Felipe Balbi
2014-01-10 9:52 ` Tero Kristo
2014-01-10 9:52 ` Tero Kristo
2014-01-10 16:13 ` Felipe Balbi
2014-01-10 16:13 ` Felipe Balbi
2014-01-10 16:30 ` Tero Kristo
2014-01-10 16:30 ` Tero Kristo
2014-01-10 18:51 ` Tony Lindgren
2014-01-10 18:51 ` Tony Lindgren
2014-01-14 12:41 ` Tero Kristo
2014-01-14 12:41 ` Tero Kristo
2014-01-14 20:36 ` Felipe Balbi
2014-01-14 20:36 ` Felipe Balbi
2014-01-15 2:04 ` Felipe Balbi
2014-01-15 2:04 ` Felipe Balbi
2014-01-15 3:16 ` Mike Turquette
2014-01-15 3:16 ` Mike Turquette
2014-01-15 3:50 ` Mike Turquette
2014-01-15 3:50 ` Mike Turquette
2014-01-15 13:41 ` Tero Kristo
2014-01-15 13:41 ` Tero Kristo
2014-01-15 15:59 ` Nishanth Menon
2014-01-15 15:59 ` Nishanth Menon
2014-01-15 17:13 ` Tony Lindgren
2014-01-15 17:13 ` Tony Lindgren
2014-01-15 19:23 ` Mike Turquette
2014-01-15 19:23 ` Mike Turquette
2014-01-15 19:35 ` Tony Lindgren
2014-01-15 19:35 ` Tony Lindgren
2014-01-16 21:39 ` Mike Turquette
2014-01-16 21:39 ` Mike Turquette
2014-01-16 23:05 ` Nishanth Menon
2014-01-16 23:05 ` Nishanth Menon
2014-01-17 17:46 ` Kevin Hilman
2014-01-17 17:46 ` Kevin Hilman
2014-01-17 17:53 ` Tony Lindgren
2014-01-17 17:53 ` Tony Lindgren
2014-01-17 18:11 ` Tero Kristo
2014-01-17 18:11 ` Tero Kristo
2014-01-17 20:58 ` Mike Turquette
2014-01-17 20:58 ` Mike Turquette
2014-01-18 0:02 ` Nishanth Menon
2014-01-18 0:02 ` Nishanth Menon
2014-01-18 0:12 ` Olof Johansson
2014-01-18 0:12 ` Olof Johansson
2014-01-18 0:19 ` Nishanth Menon
2014-01-18 0:19 ` Nishanth Menon
2014-01-18 0:23 ` Olof Johansson
2014-01-18 0:23 ` Olof Johansson
2014-01-18 1:20 ` Nishanth Menon
2014-01-18 1:20 ` Nishanth Menon
2014-01-18 18:11 ` Sebastian Reichel
2014-01-18 18:11 ` Sebastian Reichel
2014-01-20 17:36 ` Nishanth Menon
2014-01-20 17:36 ` Nishanth Menon
2014-01-18 18:07 ` Tony Lindgren
2014-01-18 18:07 ` Tony Lindgren
2014-01-17 20:02 ` Nishanth Menon [this message]
2014-01-17 20:02 ` Nishanth Menon
2014-01-11 16:35 ` Joachim Eastwood
2014-01-11 16:35 ` Joachim Eastwood
2014-01-13 15:49 ` Tero Kristo
2014-01-13 15:49 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52D98C3A.8020501@ti.com \
--to=nm@ti.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.