From: zhuyj <zyjzyj2000@gmail.com>
To: Krishna Chaitanya <chaitanya.mgit@gmail.com>,
"Liu, Bopeng" <Bopeng.Liu@windriver.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: Re: 802.11a is supported in AP mode or not?
Date: Thu, 23 Jan 2014 14:44:16 +0800 [thread overview]
Message-ID: <52E0BA40.7090203@gmail.com> (raw)
In-Reply-To: <CABPxzY+URNQRYTteZjbEKAD45Y5QBvtYqx20dM8MqFsaueHSPw@mail.gmail.com>
On 01/23/2014 02:15 PM, Krishna Chaitanya wrote:
> hostapd -dd -B /etc/hostapd.conf
root@wind-desktop:~# hostapd -dd -B /etc/hostapd.conf
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd.conf
ctrl_interface_group=0
nl80211: interface wlan0 in phy phy0
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
nl80211: Using driver-based off-channel TX
nl80211: Register frame command failed (type=208): ret=-114 (Operation
already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Failed to register Action frame processing - ignore for now
nl80211: Add own interface ifindex 3
nl80211: Set mode ifindex 3 iftype 3 (AP)
nl80211: Create interface iftype 6 (MONITOR)
nl80211: New interface mon.wlan0 created: ifindex=4
nl80211: Add own interface ifindex 4
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz
nl80211: 2457-2482 @ 40 MHz
nl80211: 2474-2494 @ 20 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: Added 802.11b mode based on 802.11g information
Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=15 dBm
Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=15 dBm
Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=15 dBm
wlan0: IEEE 802.11 Configured channel (1) not found from the channel
list of current mode (2) IEEE 802.11a
wlan0: IEEE 802.11 Hardware does not support configured channel
Could not select hw_mode and channel. (-4)
wlan0: Unable to setup interface.
Flushing old station entries
Deauthenticate all stations
rmdir[ctrl_interface]: No such file or directory
nl80211: Remove interface ifindex=4
netlink: Operstate: linkmode=0, operstate=6
nl80211: Set mode ifindex 3 iftype 2 (STATION)
root@wind-desktop:~#
root@wind-desktop:~# hostapd -v
hostapd v1.0
User space daemon for IEEE 802.11 AP management,
IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
Copyright (c) 2002-2012, Jouni Malinen <j@w1.fi> and contributors
next prev parent reply other threads:[~2014-01-23 6:44 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-22 9:50 802.11a is supported in AP mode or not? zhuyj
2014-01-22 10:33 ` zhuyj
2014-01-22 10:47 ` Liu, Bopeng
2014-01-22 14:51 ` Pat Erley
2014-01-22 21:20 ` Krishna Chaitanya
2014-01-23 2:00 ` Liu, Bopeng
2014-01-23 6:15 ` Krishna Chaitanya
2014-01-23 6:37 ` Liu, Bopeng
2014-01-23 6:44 ` zhuyj [this message]
2014-01-23 8:23 ` Emmanuel Grumbach
2014-01-23 8:36 ` Liu, Bopeng
2014-01-23 8:41 ` Liu, Bopeng
2014-01-23 8:50 ` zhuyj
2014-01-23 8:57 ` Krishna Chaitanya
2014-01-23 8:59 ` Liu, Bopeng
2014-01-23 9:04 ` Krishna Chaitanya
2014-01-23 9:07 ` Liu, Bopeng
2014-01-23 9:20 ` Liu, Bopeng
2014-01-23 9:21 ` Liu, Bopeng
2014-01-23 9:27 ` Emmanuel Grumbach
2014-01-23 9:29 ` Krishna Chaitanya
2014-01-23 9:34 ` Liu, Bopeng
2014-01-23 9:36 ` Liu, Bopeng
2014-01-23 9:49 ` Emmanuel Grumbach
2014-01-24 5:27 ` Liu, Bopeng
2014-01-27 21:21 ` Anand Moon
2014-01-27 21:59 ` Anand Moon
2014-01-24 6:26 ` Liu, Bopeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52E0BA40.7090203@gmail.com \
--to=zyjzyj2000@gmail.com \
--cc=Bopeng.Liu@windriver.com \
--cc=chaitanya.mgit@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.