From: m.szyprowski@samsung.com (Marek Szyprowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC] dt-bindings: configuration of parent clocks and clock frequency
Date: Tue, 04 Feb 2014 13:16:07 +0100 [thread overview]
Message-ID: <52F0DA07.6050903@samsung.com> (raw)
In-Reply-To: <20140201030614.9977.80501@quantum>
Hello,
On 2014-02-01 04:06, Mike Turquette wrote:
> Quoting Sylwester Nawrocki (2014-01-21 04:48:43)
> > 5. Similarly to the regulator bindings the clock names could be appended
> > to name of a DT property:
> >
> > [clk_name]-assigned-clock-parent = <...>;
> > [clk_name]-assigned-clock-rate = <...>;
>
> I have always been partial to the way that the reg framework does its
> [reg_name]-supply. We could shorten it to something like:
>
> [clk-name]-asn-parent = ....
> [clk-name]-asn-rate = ...
>
> This is actually the format that was discussed at the ARM kernel summit
> IIRC.
I think that "[clk-name]-clk-parent" and "[clk-name]-clk-rate" will be a bit
more descriptive names instead of quite ambiguous "asn".
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
WARNING: multiple messages have this Message-ID (diff)
From: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
To: Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Sylwester Nawrocki
<s.nawrocki-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
linux-arm-kernel
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: Russell King - ARM Linux
<linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Kyungmin Park
<kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Mark Rutland <Mark.Rutland-5wv7dgnIgG8@public.gmane.org>,
Pawel Moll <Pawel.Moll-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: Re: [RFC] dt-bindings: configuration of parent clocks and clock frequency
Date: Tue, 04 Feb 2014 13:16:07 +0100 [thread overview]
Message-ID: <52F0DA07.6050903@samsung.com> (raw)
In-Reply-To: <20140201030614.9977.80501@quantum>
Hello,
On 2014-02-01 04:06, Mike Turquette wrote:
> Quoting Sylwester Nawrocki (2014-01-21 04:48:43)
> > 5. Similarly to the regulator bindings the clock names could be appended
> > to name of a DT property:
> >
> > [clk_name]-assigned-clock-parent = <...>;
> > [clk_name]-assigned-clock-rate = <...>;
>
> I have always been partial to the way that the reg framework does its
> [reg_name]-supply. We could shorten it to something like:
>
> [clk-name]-asn-parent = ....
> [clk-name]-asn-rate = ...
>
> This is actually the format that was discussed at the ARM kernel summit
> IIRC.
I think that "[clk-name]-clk-parent" and "[clk-name]-clk-rate" will be a bit
more descriptive names instead of quite ambiguous "asn".
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-02-04 12:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-21 12:48 [RFC] dt-bindings: configuration of parent clocks and clock frequency Sylwester Nawrocki
2014-01-21 12:48 ` Sylwester Nawrocki
2014-02-01 3:06 ` Mike Turquette
2014-02-01 3:06 ` Mike Turquette
2014-02-04 12:16 ` Marek Szyprowski [this message]
2014-02-04 12:16 ` Marek Szyprowski
2014-02-06 16:43 ` Mike Turquette
2014-02-06 16:43 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F0DA07.6050903@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.