From: Tang Chen <tangchen@cn.fujitsu.com>
To: Fengguang Wu <fengguang.wu@intel.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>,
Linux Memory Management List <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>,
Tang Chen <imtangchen@gmail.com>,
Tang Chen <tangchen@cn.fujitsu.com>
Subject: Re: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane()
Date: Thu, 06 Feb 2014 18:05:37 +0800 [thread overview]
Message-ID: <52F35E71.3030105@cn.fujitsu.com> (raw)
In-Reply-To: <20140206094428.GC17971@localhost>
On 02/06/2014 05:44 PM, Fengguang Wu wrote:
> Hi Tang,
>
> We noticed the below warning and the first bad commit is
>
> commit e8d1955258091e4c92d5a975ebd7fd8a98f5d30f
> Author: Tang Chen<tangchen@cn.fujitsu.com>
> AuthorDate: Fri Feb 22 16:33:44 2013 -0800
> Commit: Linus Torvalds<torvalds@linux-foundation.org>
> CommitDate: Sat Feb 23 17:50:14 2013 -0800
>
> acpi, memory-hotplug: parse SRAT before memblock is ready
Hi Wu,
This patch has been droped a long time ago. It is not in the latest kernel.
Now the memory hotplug implementation is done in a different way.
Thanks.
>
> arch/x86/kernel/setup.c | 13 +++++++++----
> arch/x86/mm/numa.c | 6 ++++--
> drivers/acpi/numa.c | 23 +++++++++++++----------
> include/linux/acpi.h | 8 ++++++++
> 4 files changed, 34 insertions(+), 16 deletions(-)
>
> [ 0.845092] smpboot: Booting Node 1, Processors #1
> [ 0.864812] masked ExtINT on CPU#1
> [ 0.868706] CPU1: Thermal LVT vector (0xfa) already installed
> [ 0.875158] ------------[ cut here ]------------
> [ 0.880330] WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6b/0x7c()
> [ 0.891505] Hardware name: S2600CP
> [ 0.895314] sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
>
> [ 0.906295] Modules linked in:
> [ 0.909927] Pid: 0, comm: swapper/1 Not tainted 3.8.0-06530-ge8d1955 #1
> [ 0.917314] Call Trace:
> [ 0.920055] [<ffffffff81970409>] ? topology_sane.isra.2+0x6b/0x7c
> [ 0.926963] [<ffffffff810bcd5d>] warn_slowpath_common+0x81/0x99
> [ 0.933667] [<ffffffff810bcdc1>] warn_slowpath_fmt+0x4c/0x4e
> [ 0.940092] [<ffffffff8196b565>] ? calibrate_delay+0xae/0x4ba
> [ 0.946612] [<ffffffff810508ea>] ? __mcheck_cpu_init_timer+0x4a/0x4f
> [ 0.953799] [<ffffffff81970409>] topology_sane.isra.2+0x6b/0x7c
> [ 0.960509] [<ffffffff819706e0>] set_cpu_sibling_map+0x28c/0x43a
> [ 0.967308] [<ffffffff81970a3c>] start_secondary+0x1ae/0x276
> [ 0.973742] ---[ end trace db722b2086ba6d20 ]---
> [ 0.999234] OK
> [ 1.001655] smpboot: Booting Node 0, Processors #2
>
> Full dmesg and kconfig are attached.
>
> Thanks,
> Fengguang
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: Tang Chen <tangchen@cn.fujitsu.com>
To: Fengguang Wu <fengguang.wu@intel.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>,
Linux Memory Management List <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>,
Tang Chen <imtangchen@gmail.com>,
Tang Chen <tangchen@cn.fujitsu.com>
Subject: Re: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane()
Date: Thu, 06 Feb 2014 18:05:37 +0800 [thread overview]
Message-ID: <52F35E71.3030105@cn.fujitsu.com> (raw)
In-Reply-To: <20140206094428.GC17971@localhost>
On 02/06/2014 05:44 PM, Fengguang Wu wrote:
> Hi Tang,
>
> We noticed the below warning and the first bad commit is
>
> commit e8d1955258091e4c92d5a975ebd7fd8a98f5d30f
> Author: Tang Chen<tangchen@cn.fujitsu.com>
> AuthorDate: Fri Feb 22 16:33:44 2013 -0800
> Commit: Linus Torvalds<torvalds@linux-foundation.org>
> CommitDate: Sat Feb 23 17:50:14 2013 -0800
>
> acpi, memory-hotplug: parse SRAT before memblock is ready
Hi Wu,
This patch has been droped a long time ago. It is not in the latest kernel.
Now the memory hotplug implementation is done in a different way.
Thanks.
>
> arch/x86/kernel/setup.c | 13 +++++++++----
> arch/x86/mm/numa.c | 6 ++++--
> drivers/acpi/numa.c | 23 +++++++++++++----------
> include/linux/acpi.h | 8 ++++++++
> 4 files changed, 34 insertions(+), 16 deletions(-)
>
> [ 0.845092] smpboot: Booting Node 1, Processors #1
> [ 0.864812] masked ExtINT on CPU#1
> [ 0.868706] CPU1: Thermal LVT vector (0xfa) already installed
> [ 0.875158] ------------[ cut here ]------------
> [ 0.880330] WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6b/0x7c()
> [ 0.891505] Hardware name: S2600CP
> [ 0.895314] sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
>
> [ 0.906295] Modules linked in:
> [ 0.909927] Pid: 0, comm: swapper/1 Not tainted 3.8.0-06530-ge8d1955 #1
> [ 0.917314] Call Trace:
> [ 0.920055] [<ffffffff81970409>] ? topology_sane.isra.2+0x6b/0x7c
> [ 0.926963] [<ffffffff810bcd5d>] warn_slowpath_common+0x81/0x99
> [ 0.933667] [<ffffffff810bcdc1>] warn_slowpath_fmt+0x4c/0x4e
> [ 0.940092] [<ffffffff8196b565>] ? calibrate_delay+0xae/0x4ba
> [ 0.946612] [<ffffffff810508ea>] ? __mcheck_cpu_init_timer+0x4a/0x4f
> [ 0.953799] [<ffffffff81970409>] topology_sane.isra.2+0x6b/0x7c
> [ 0.960509] [<ffffffff819706e0>] set_cpu_sibling_map+0x28c/0x43a
> [ 0.967308] [<ffffffff81970a3c>] start_secondary+0x1ae/0x276
> [ 0.973742] ---[ end trace db722b2086ba6d20 ]---
> [ 0.999234] OK
> [ 1.001655] smpboot: Booting Node 0, Processors #2
>
> Full dmesg and kconfig are attached.
>
> Thanks,
> Fengguang
next prev parent reply other threads:[~2014-02-06 10:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-06 9:44 WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane() Fengguang Wu
2014-02-06 10:05 ` Tang Chen [this message]
2014-02-06 10:05 ` Tang Chen
2014-02-06 10:23 ` Fengguang Wu
2014-02-06 10:23 ` Fengguang Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F35E71.3030105@cn.fujitsu.com \
--to=tangchen@cn.fujitsu.com \
--cc=fengguang.wu@intel.com \
--cc=imtangchen@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=wency@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.