[PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock

[PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock

[Bo Shen]

When SSC work in slave mode, the clock can come from TK pin and also
can come from RK pin, this is hardware design decided. So, make it
available to choose where the clock from.

Changes in v3:
  - Move the property from card to ssc device
Series-changes: 2
  - using "-" replace "_" in binding document

Bo Shen (2):
  ASoC: atmel_ssc_dai: make option to choose clock
  Binding: atmel-ssc: add option to choose clock

 Documentation/devicetree/bindings/misc/atmel-ssc.txt |  8 ++++++++
 drivers/misc/atmel-ssc.c                             |  6 ++++++
 include/linux/atmel-ssc.h                            |  1 +
 sound/soc/atmel/atmel_ssc_dai.c                      | 13 +++++++++----
 4 files changed, 24 insertions(+), 4 deletions(-)

-- 
1.8.5.2

[PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock

[Bo Shen]

When SSC work in slave mode, the clock can come from TK pin and also
can come from RK pin, this is hardware design decided. So, make it
available to choose where the clock from.

Changes in v3:
  - Move the property from card to ssc device
Series-changes: 2
  - using "-" replace "_" in binding document

Bo Shen (2):
  ASoC: atmel_ssc_dai: make option to choose clock
  Binding: atmel-ssc: add option to choose clock

 Documentation/devicetree/bindings/misc/atmel-ssc.txt |  8 ++++++++
 drivers/misc/atmel-ssc.c                             |  6 ++++++
 include/linux/atmel-ssc.h                            |  1 +
 sound/soc/atmel/atmel_ssc_dai.c                      | 13 +++++++++----
 4 files changed, 24 insertions(+), 4 deletions(-)

-- 
1.8.5.2

[PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock

[Bo Shen]

When SSC work in slave mode, the clock can come from TK pin and also
can come from RK pin, this is hardware design decided. So, make it
available to choose where the clock from.

Changes in v3:
  - Move the property from card to ssc device
Series-changes: 2
  - using "-" replace "_" in binding document

Bo Shen (2):
  ASoC: atmel_ssc_dai: make option to choose clock
  Binding: atmel-ssc: add option to choose clock

 Documentation/devicetree/bindings/misc/atmel-ssc.txt |  8 ++++++++
 drivers/misc/atmel-ssc.c                             |  6 ++++++
 include/linux/atmel-ssc.h                            |  1 +
 sound/soc/atmel/atmel_ssc_dai.c                      | 13 +++++++++----
 4 files changed, 24 insertions(+), 4 deletions(-)

-- 
1.8.5.2

[PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock

[Bo Shen]

When SSC work in slave mode, the clock can come from TK pin and also
can come from RK pin, this is hardware design decided. So, make it
available to choose where the clock from.

Changes in v3:
  - Move the property from card to ssc device
Series-changes: 2
  - using "-" replace "_" in binding document

Bo Shen (2):
  ASoC: atmel_ssc_dai: make option to choose clock
  Binding: atmel-ssc: add option to choose clock

 Documentation/devicetree/bindings/misc/atmel-ssc.txt |  8 ++++++++
 drivers/misc/atmel-ssc.c                             |  6 ++++++
 include/linux/atmel-ssc.h                            |  1 +
 sound/soc/atmel/atmel_ssc_dai.c                      | 13 +++++++++----
 4 files changed, 24 insertions(+), 4 deletions(-)

-- 
1.8.5.2

[PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock

[Bo Shen]

When SSC works in slave mode, according to the hardware design, the
clock can get from TK pin, also can get from RK pin. So, add one
parameter to choose where the clock from.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Changes in v3:
  - New, move clk-from-rk-pin property from card to ssc device

 drivers/misc/atmel-ssc.c        |  6 ++++++
 include/linux/atmel-ssc.h       |  1 +
 sound/soc/atmel/atmel_ssc_dai.c | 13 +++++++++----
 3 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 5be80840..22de137 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -150,6 +150,12 @@ static int ssc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat;
 
+	if (pdev->dev.of_node) {
+		struct device_node *np = pdev->dev.of_node;
+		ssc->clk_from_rk_pin =
+			of_property_read_bool(np, "atmel,clk-from-rk-pin");
+	}
+
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	ssc->regs = devm_ioremap_resource(&pdev->dev, regs);
 	if (IS_ERR(ssc->regs))
diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
index 66a0e53..571a12e 100644
--- a/include/linux/atmel-ssc.h
+++ b/include/linux/atmel-ssc.h
@@ -18,6 +18,7 @@ struct ssc_device {
 	struct clk		*clk;
 	int			user;
 	int			irq;
+	bool			clk_from_rk_pin;
 };
 
 struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 8697ced..ca1d8a3 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -341,6 +341,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 {
 	int id = dai->id;
 	struct atmel_ssc_info *ssc_p = &ssc_info[id];
+	struct ssc_device *ssc = ssc_p->ssc;
 	struct atmel_pcm_dma_params *dma_params;
 	int dir, channels, bits;
 	u32 tfmr, rfmr, tcmr, rcmr;
@@ -466,7 +467,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, start_event)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -481,7 +483,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, start_event)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)
@@ -550,7 +553,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -565,7 +569,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)
-- 
1.8.5.2

[PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock

[Bo Shen]

When SSC works in slave mode, according to the hardware design, the
clock can get from TK pin, also can get from RK pin. So, add one
parameter to choose where the clock from.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Changes in v3:
  - New, move clk-from-rk-pin property from card to ssc device

 drivers/misc/atmel-ssc.c        |  6 ++++++
 include/linux/atmel-ssc.h       |  1 +
 sound/soc/atmel/atmel_ssc_dai.c | 13 +++++++++----
 3 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 5be80840..22de137 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -150,6 +150,12 @@ static int ssc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat;
 
+	if (pdev->dev.of_node) {
+		struct device_node *np = pdev->dev.of_node;
+		ssc->clk_from_rk_pin =
+			of_property_read_bool(np, "atmel,clk-from-rk-pin");
+	}
+
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	ssc->regs = devm_ioremap_resource(&pdev->dev, regs);
 	if (IS_ERR(ssc->regs))
diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
index 66a0e53..571a12e 100644
--- a/include/linux/atmel-ssc.h
+++ b/include/linux/atmel-ssc.h
@@ -18,6 +18,7 @@ struct ssc_device {
 	struct clk		*clk;
 	int			user;
 	int			irq;
+	bool			clk_from_rk_pin;
 };
 
 struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 8697ced..ca1d8a3 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -341,6 +341,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 {
 	int id = dai->id;
 	struct atmel_ssc_info *ssc_p = &ssc_info[id];
+	struct ssc_device *ssc = ssc_p->ssc;
 	struct atmel_pcm_dma_params *dma_params;
 	int dir, channels, bits;
 	u32 tfmr, rfmr, tcmr, rcmr;
@@ -466,7 +467,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, start_event)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -481,7 +483,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, start_event)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)
@@ -550,7 +553,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -565,7 +569,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)
-- 
1.8.5.2

[PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock

[Bo Shen]

When SSC works in slave mode, according to the hardware design, the
clock can get from TK pin, also can get from RK pin. So, add one
parameter to choose where the clock from.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Changes in v3:
  - New, move clk-from-rk-pin property from card to ssc device

 drivers/misc/atmel-ssc.c        |  6 ++++++
 include/linux/atmel-ssc.h       |  1 +
 sound/soc/atmel/atmel_ssc_dai.c | 13 +++++++++----
 3 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 5be80840..22de137 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -150,6 +150,12 @@ static int ssc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat;
 
+	if (pdev->dev.of_node) {
+		struct device_node *np = pdev->dev.of_node;
+		ssc->clk_from_rk_pin =
+			of_property_read_bool(np, "atmel,clk-from-rk-pin");
+	}
+
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	ssc->regs = devm_ioremap_resource(&pdev->dev, regs);
 	if (IS_ERR(ssc->regs))
diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
index 66a0e53..571a12e 100644
--- a/include/linux/atmel-ssc.h
+++ b/include/linux/atmel-ssc.h
@@ -18,6 +18,7 @@ struct ssc_device {
 	struct clk		*clk;
 	int			user;
 	int			irq;
+	bool			clk_from_rk_pin;
 };
 
 struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 8697ced..ca1d8a3 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -341,6 +341,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 {
 	int id = dai->id;
 	struct atmel_ssc_info *ssc_p = &ssc_info[id];
+	struct ssc_device *ssc = ssc_p->ssc;
 	struct atmel_pcm_dma_params *dma_params;
 	int dir, channels, bits;
 	u32 tfmr, rfmr, tcmr, rcmr;
@@ -466,7 +467,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, start_event)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -481,7 +483,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, start_event)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)
@@ -550,7 +553,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -565,7 +569,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)
-- 
1.8.5.2

[PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock

[Bo Shen]

When SSC works in slave mode, according to the hardware design, the
clock can get from TK pin, also can get from RK pin. So, add one
parameter to choose where the clock from.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Changes in v3:
  - New, move clk-from-rk-pin property from card to ssc device

 drivers/misc/atmel-ssc.c        |  6 ++++++
 include/linux/atmel-ssc.h       |  1 +
 sound/soc/atmel/atmel_ssc_dai.c | 13 +++++++++----
 3 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 5be80840..22de137 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -150,6 +150,12 @@ static int ssc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat;
 
+	if (pdev->dev.of_node) {
+		struct device_node *np = pdev->dev.of_node;
+		ssc->clk_from_rk_pin +			of_property_read_bool(np, "atmel,clk-from-rk-pin");
+	}
+
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	ssc->regs = devm_ioremap_resource(&pdev->dev, regs);
 	if (IS_ERR(ssc->regs))
diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
index 66a0e53..571a12e 100644
--- a/include/linux/atmel-ssc.h
+++ b/include/linux/atmel-ssc.h
@@ -18,6 +18,7 @@ struct ssc_device {
 	struct clk		*clk;
 	int			user;
 	int			irq;
+	bool			clk_from_rk_pin;
 };
 
 struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 8697ced..ca1d8a3 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -341,6 +341,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 {
 	int id = dai->id;
 	struct atmel_ssc_info *ssc_p = &ssc_info[id];
+	struct ssc_device *ssc = ssc_p->ssc;
 	struct atmel_pcm_dma_params *dma_params;
 	int dir, channels, bits;
 	u32 tfmr, rfmr, tcmr, rcmr;
@@ -466,7 +467,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, start_event)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -481,7 +483,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, start_event)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)
@@ -550,7 +553,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
 			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(RCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_PIN : SSC_CKS_CLOCK);
 
 		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -565,7 +569,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
 			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
 			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
-			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					   SSC_CKS_CLOCK : SSC_CKS_PIN);
 
 		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
 			| SSC_BF(TFMR_FSDEN, 0)
-- 
1.8.5.2

Re: [PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock

[Nicolas Ferre]

On 10/02/2014 07:09, Bo Shen :
> When SSC works in slave mode, according to the hardware design, the
> clock can get from TK pin, also can get from RK pin. So, add one
> parameter to choose where the clock from.
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> Changes in v3:
>   - New, move clk-from-rk-pin property from card to ssc device
> 
>  drivers/misc/atmel-ssc.c        |  6 ++++++
>  include/linux/atmel-ssc.h       |  1 +
>  sound/soc/atmel/atmel_ssc_dai.c | 13 +++++++++----
>  3 files changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
> index 5be80840..22de137 100644
> --- a/drivers/misc/atmel-ssc.c
> +++ b/drivers/misc/atmel-ssc.c
> @@ -150,6 +150,12 @@ static int ssc_probe(struct platform_device *pdev)
>  		return -ENODEV;
>  	ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat;
>  
> +	if (pdev->dev.of_node) {
> +		struct device_node *np = pdev->dev.of_node;
> +		ssc->clk_from_rk_pin =
> +			of_property_read_bool(np, "atmel,clk-from-rk-pin");
> +	}
> +
>  	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	ssc->regs = devm_ioremap_resource(&pdev->dev, regs);
>  	if (IS_ERR(ssc->regs))
> diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
> index 66a0e53..571a12e 100644
> --- a/include/linux/atmel-ssc.h
> +++ b/include/linux/atmel-ssc.h
> @@ -18,6 +18,7 @@ struct ssc_device {
>  	struct clk		*clk;
>  	int			user;
>  	int			irq;
> +	bool			clk_from_rk_pin;
>  };
>  
>  struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
> diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
> index 8697ced..ca1d8a3 100644
> --- a/sound/soc/atmel/atmel_ssc_dai.c
> +++ b/sound/soc/atmel/atmel_ssc_dai.c
> @@ -341,6 +341,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  {
>  	int id = dai->id;
>  	struct atmel_ssc_info *ssc_p = &ssc_info[id];
> +	struct ssc_device *ssc = ssc_p->ssc;
>  	struct atmel_pcm_dma_params *dma_params;
>  	int dir, channels, bits;
>  	u32 tfmr, rfmr, tcmr, rcmr;
> @@ -466,7 +467,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(RCMR_START, start_event)
>  			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
>  			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_PIN : SSC_CKS_CLOCK);
>  
>  		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
> @@ -481,7 +483,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(TCMR_START, start_event)
>  			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
>  			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_CLOCK : SSC_CKS_PIN);
>  
>  		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(TFMR_FSDEN, 0)
> @@ -550,7 +553,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
>  			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
>  			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(RCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_PIN : SSC_CKS_CLOCK);
>  
>  		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
> @@ -565,7 +569,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
>  			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
>  			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_CLOCK : SSC_CKS_PIN);
>  
>  		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(TFMR_FSDEN, 0)
> 


-- 
Nicolas Ferre

Re: [PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock

[Nicolas Ferre]

On 10/02/2014 07:09, Bo Shen :
> When SSC works in slave mode, according to the hardware design, the
> clock can get from TK pin, also can get from RK pin. So, add one
> parameter to choose where the clock from.
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> Changes in v3:
>   - New, move clk-from-rk-pin property from card to ssc device
> 
>  drivers/misc/atmel-ssc.c        |  6 ++++++
>  include/linux/atmel-ssc.h       |  1 +
>  sound/soc/atmel/atmel_ssc_dai.c | 13 +++++++++----
>  3 files changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
> index 5be80840..22de137 100644
> --- a/drivers/misc/atmel-ssc.c
> +++ b/drivers/misc/atmel-ssc.c
> @@ -150,6 +150,12 @@ static int ssc_probe(struct platform_device *pdev)
>  		return -ENODEV;
>  	ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat;
>  
> +	if (pdev->dev.of_node) {
> +		struct device_node *np = pdev->dev.of_node;
> +		ssc->clk_from_rk_pin =
> +			of_property_read_bool(np, "atmel,clk-from-rk-pin");
> +	}
> +
>  	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	ssc->regs = devm_ioremap_resource(&pdev->dev, regs);
>  	if (IS_ERR(ssc->regs))
> diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
> index 66a0e53..571a12e 100644
> --- a/include/linux/atmel-ssc.h
> +++ b/include/linux/atmel-ssc.h
> @@ -18,6 +18,7 @@ struct ssc_device {
>  	struct clk		*clk;
>  	int			user;
>  	int			irq;
> +	bool			clk_from_rk_pin;
>  };
>  
>  struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
> diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
> index 8697ced..ca1d8a3 100644
> --- a/sound/soc/atmel/atmel_ssc_dai.c
> +++ b/sound/soc/atmel/atmel_ssc_dai.c
> @@ -341,6 +341,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  {
>  	int id = dai->id;
>  	struct atmel_ssc_info *ssc_p = &ssc_info[id];
> +	struct ssc_device *ssc = ssc_p->ssc;
>  	struct atmel_pcm_dma_params *dma_params;
>  	int dir, channels, bits;
>  	u32 tfmr, rfmr, tcmr, rcmr;
> @@ -466,7 +467,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(RCMR_START, start_event)
>  			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
>  			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_PIN : SSC_CKS_CLOCK);
>  
>  		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
> @@ -481,7 +483,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(TCMR_START, start_event)
>  			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
>  			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_CLOCK : SSC_CKS_PIN);
>  
>  		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(TFMR_FSDEN, 0)
> @@ -550,7 +553,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
>  			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
>  			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(RCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_PIN : SSC_CKS_CLOCK);
>  
>  		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
> @@ -565,7 +569,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
>  			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
>  			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_CLOCK : SSC_CKS_PIN);
>  
>  		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(TFMR_FSDEN, 0)
> 


-- 
Nicolas Ferre

[PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock

[Nicolas Ferre]

On 10/02/2014 07:09, Bo Shen :
> When SSC works in slave mode, according to the hardware design, the
> clock can get from TK pin, also can get from RK pin. So, add one
> parameter to choose where the clock from.
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> Changes in v3:
>   - New, move clk-from-rk-pin property from card to ssc device
> 
>  drivers/misc/atmel-ssc.c        |  6 ++++++
>  include/linux/atmel-ssc.h       |  1 +
>  sound/soc/atmel/atmel_ssc_dai.c | 13 +++++++++----
>  3 files changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
> index 5be80840..22de137 100644
> --- a/drivers/misc/atmel-ssc.c
> +++ b/drivers/misc/atmel-ssc.c
> @@ -150,6 +150,12 @@ static int ssc_probe(struct platform_device *pdev)
>  		return -ENODEV;
>  	ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat;
>  
> +	if (pdev->dev.of_node) {
> +		struct device_node *np = pdev->dev.of_node;
> +		ssc->clk_from_rk_pin =
> +			of_property_read_bool(np, "atmel,clk-from-rk-pin");
> +	}
> +
>  	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	ssc->regs = devm_ioremap_resource(&pdev->dev, regs);
>  	if (IS_ERR(ssc->regs))
> diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
> index 66a0e53..571a12e 100644
> --- a/include/linux/atmel-ssc.h
> +++ b/include/linux/atmel-ssc.h
> @@ -18,6 +18,7 @@ struct ssc_device {
>  	struct clk		*clk;
>  	int			user;
>  	int			irq;
> +	bool			clk_from_rk_pin;
>  };
>  
>  struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
> diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
> index 8697ced..ca1d8a3 100644
> --- a/sound/soc/atmel/atmel_ssc_dai.c
> +++ b/sound/soc/atmel/atmel_ssc_dai.c
> @@ -341,6 +341,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  {
>  	int id = dai->id;
>  	struct atmel_ssc_info *ssc_p = &ssc_info[id];
> +	struct ssc_device *ssc = ssc_p->ssc;
>  	struct atmel_pcm_dma_params *dma_params;
>  	int dir, channels, bits;
>  	u32 tfmr, rfmr, tcmr, rcmr;
> @@ -466,7 +467,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(RCMR_START, start_event)
>  			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
>  			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_PIN : SSC_CKS_CLOCK);
>  
>  		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
> @@ -481,7 +483,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(TCMR_START, start_event)
>  			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
>  			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_CLOCK : SSC_CKS_PIN);
>  
>  		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(TFMR_FSDEN, 0)
> @@ -550,7 +553,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
>  			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
>  			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(RCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_PIN : SSC_CKS_CLOCK);
>  
>  		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
> @@ -565,7 +569,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
>  			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
>  			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_CLOCK : SSC_CKS_PIN);
>  
>  		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(TFMR_FSDEN, 0)
> 


-- 
Nicolas Ferre

Re: [PATCH v3 1/2] ASoC: atmel_ssc_dai: make option to choose clock

[Nicolas Ferre]

On 10/02/2014 07:09, Bo Shen :
> When SSC works in slave mode, according to the hardware design, the
> clock can get from TK pin, also can get from RK pin. So, add one
> parameter to choose where the clock from.
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> Changes in v3:
>   - New, move clk-from-rk-pin property from card to ssc device
> 
>  drivers/misc/atmel-ssc.c        |  6 ++++++
>  include/linux/atmel-ssc.h       |  1 +
>  sound/soc/atmel/atmel_ssc_dai.c | 13 +++++++++----
>  3 files changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
> index 5be80840..22de137 100644
> --- a/drivers/misc/atmel-ssc.c
> +++ b/drivers/misc/atmel-ssc.c
> @@ -150,6 +150,12 @@ static int ssc_probe(struct platform_device *pdev)
>  		return -ENODEV;
>  	ssc->pdata = (struct atmel_ssc_platform_data *)plat_dat;
>  
> +	if (pdev->dev.of_node) {
> +		struct device_node *np = pdev->dev.of_node;
> +		ssc->clk_from_rk_pin > +			of_property_read_bool(np, "atmel,clk-from-rk-pin");
> +	}
> +
>  	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	ssc->regs = devm_ioremap_resource(&pdev->dev, regs);
>  	if (IS_ERR(ssc->regs))
> diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h
> index 66a0e53..571a12e 100644
> --- a/include/linux/atmel-ssc.h
> +++ b/include/linux/atmel-ssc.h
> @@ -18,6 +18,7 @@ struct ssc_device {
>  	struct clk		*clk;
>  	int			user;
>  	int			irq;
> +	bool			clk_from_rk_pin;
>  };
>  
>  struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
> diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
> index 8697ced..ca1d8a3 100644
> --- a/sound/soc/atmel/atmel_ssc_dai.c
> +++ b/sound/soc/atmel/atmel_ssc_dai.c
> @@ -341,6 +341,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  {
>  	int id = dai->id;
>  	struct atmel_ssc_info *ssc_p = &ssc_info[id];
> +	struct ssc_device *ssc = ssc_p->ssc;
>  	struct atmel_pcm_dma_params *dma_params;
>  	int dir, channels, bits;
>  	u32 tfmr, rfmr, tcmr, rcmr;
> @@ -466,7 +467,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(RCMR_START, start_event)
>  			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
>  			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_PIN : SSC_CKS_CLOCK);
>  
>  		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
> @@ -481,7 +483,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(TCMR_START, start_event)
>  			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
>  			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_CLOCK : SSC_CKS_PIN);
>  
>  		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(TFMR_FSDEN, 0)
> @@ -550,7 +553,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(RCMR_START, SSC_START_RISING_RF)
>  			| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
>  			| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(RCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_PIN : SSC_CKS_CLOCK);
>  
>  		rfmr =	  SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
> @@ -565,7 +569,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
>  			| SSC_BF(TCMR_START, SSC_START_RISING_RF)
>  			| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
>  			| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
> -			| SSC_BF(TCMR_CKS, SSC_CKS_PIN);
> +			| SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
> +					   SSC_CKS_CLOCK : SSC_CKS_PIN);
>  
>  		tfmr =	  SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
>  			| SSC_BF(TFMR_FSDEN, 0)
> 


-- 
Nicolas Ferre

[PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock

[Bo Shen]

Add the option to choose clock on which pin input to SSC (as slave).
Default is on TK pin to SSC, add "atmel,clk-from-rk-pin" option to
specify the clock is on RK pin to SSC.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Changes in v3:
  - None
Series-changes: 2
  - using "-" replace "_" in binding document

 Documentation/devicetree/bindings/misc/atmel-ssc.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index a45ae08..5c1e14e 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -14,6 +14,14 @@ Required properties for devices compatible with "atmel,at91sam9g45-ssc":
   See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
 - dma-names: Must be "tx", "rx".
 
+Optional properties:
+  - atmel,clk-from-rk-pin: bool property.
+     - When SSC works in slave mode, according to the hardware design, the
+       clock can get from TK pin, and also can get from RK pin. So, add
+       this parameter to choose where the clock from.
+     - By default the clock is from TK pin, if the clock from RK pin, this
+       property is needed.
+
 Examples:
 - PDC transfer:
 ssc0: ssc@fffbc000 {
-- 
1.8.5.2

[PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock

[Bo Shen]

Add the option to choose clock on which pin input to SSC (as slave).
Default is on TK pin to SSC, add "atmel,clk-from-rk-pin" option to
specify the clock is on RK pin to SSC.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Changes in v3:
  - None
Series-changes: 2
  - using "-" replace "_" in binding document

 Documentation/devicetree/bindings/misc/atmel-ssc.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index a45ae08..5c1e14e 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -14,6 +14,14 @@ Required properties for devices compatible with "atmel,at91sam9g45-ssc":
   See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
 - dma-names: Must be "tx", "rx".
 
+Optional properties:
+  - atmel,clk-from-rk-pin: bool property.
+     - When SSC works in slave mode, according to the hardware design, the
+       clock can get from TK pin, and also can get from RK pin. So, add
+       this parameter to choose where the clock from.
+     - By default the clock is from TK pin, if the clock from RK pin, this
+       property is needed.
+
 Examples:
 - PDC transfer:
 ssc0: ssc@fffbc000 {
-- 
1.8.5.2

[PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock

[Bo Shen]

Add the option to choose clock on which pin input to SSC (as slave).
Default is on TK pin to SSC, add "atmel,clk-from-rk-pin" option to
specify the clock is on RK pin to SSC.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Changes in v3:
  - None
Series-changes: 2
  - using "-" replace "_" in binding document

 Documentation/devicetree/bindings/misc/atmel-ssc.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index a45ae08..5c1e14e 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -14,6 +14,14 @@ Required properties for devices compatible with "atmel,at91sam9g45-ssc":
   See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
 - dma-names: Must be "tx", "rx".
 
+Optional properties:
+  - atmel,clk-from-rk-pin: bool property.
+     - When SSC works in slave mode, according to the hardware design, the
+       clock can get from TK pin, and also can get from RK pin. So, add
+       this parameter to choose where the clock from.
+     - By default the clock is from TK pin, if the clock from RK pin, this
+       property is needed.
+
 Examples:
 - PDC transfer:
 ssc0: ssc at fffbc000 {
-- 
1.8.5.2

[PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock

[Bo Shen]

Add the option to choose clock on which pin input to SSC (as slave).
Default is on TK pin to SSC, add "atmel,clk-from-rk-pin" option to
specify the clock is on RK pin to SSC.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Changes in v3:
  - None
Series-changes: 2
  - using "-" replace "_" in binding document

 Documentation/devicetree/bindings/misc/atmel-ssc.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index a45ae08..5c1e14e 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -14,6 +14,14 @@ Required properties for devices compatible with "atmel,at91sam9g45-ssc":
   See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
 - dma-names: Must be "tx", "rx".
 
+Optional properties:
+  - atmel,clk-from-rk-pin: bool property.
+     - When SSC works in slave mode, according to the hardware design, the
+       clock can get from TK pin, and also can get from RK pin. So, add
+       this parameter to choose where the clock from.
+     - By default the clock is from TK pin, if the clock from RK pin, this
+       property is needed.
+
 Examples:
 - PDC transfer:
 ssc0: ssc@fffbc000 {
-- 
1.8.5.2

Re: [PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock

[Nicolas Ferre]

On 10/02/2014 07:09, Bo Shen :
> Add the option to choose clock on which pin input to SSC (as slave).
> Default is on TK pin to SSC, add "atmel,clk-from-rk-pin" option to
> specify the clock is on RK pin to SSC.
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> Changes in v3:
>   - None
> Series-changes: 2
>   - using "-" replace "_" in binding document
> 
>  Documentation/devicetree/bindings/misc/atmel-ssc.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> index a45ae08..5c1e14e 100644
> --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> @@ -14,6 +14,14 @@ Required properties for devices compatible with "atmel,at91sam9g45-ssc":
>    See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
>  - dma-names: Must be "tx", "rx".
>  
> +Optional properties:
> +  - atmel,clk-from-rk-pin: bool property.
> +     - When SSC works in slave mode, according to the hardware design, the
> +       clock can get from TK pin, and also can get from RK pin. So, add
> +       this parameter to choose where the clock from.
> +     - By default the clock is from TK pin, if the clock from RK pin, this
> +       property is needed.
> +
>  Examples:
>  - PDC transfer:
>  ssc0: ssc@fffbc000 {
> 


-- 
Nicolas Ferre

Re: [PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock

[Nicolas Ferre]

On 10/02/2014 07:09, Bo Shen :
> Add the option to choose clock on which pin input to SSC (as slave).
> Default is on TK pin to SSC, add "atmel,clk-from-rk-pin" option to
> specify the clock is on RK pin to SSC.
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> Changes in v3:
>   - None
> Series-changes: 2
>   - using "-" replace "_" in binding document
> 
>  Documentation/devicetree/bindings/misc/atmel-ssc.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> index a45ae08..5c1e14e 100644
> --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> @@ -14,6 +14,14 @@ Required properties for devices compatible with "atmel,at91sam9g45-ssc":
>    See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
>  - dma-names: Must be "tx", "rx".
>  
> +Optional properties:
> +  - atmel,clk-from-rk-pin: bool property.
> +     - When SSC works in slave mode, according to the hardware design, the
> +       clock can get from TK pin, and also can get from RK pin. So, add
> +       this parameter to choose where the clock from.
> +     - By default the clock is from TK pin, if the clock from RK pin, this
> +       property is needed.
> +
>  Examples:
>  - PDC transfer:
>  ssc0: ssc@fffbc000 {
> 


-- 
Nicolas Ferre

[PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock

[Nicolas Ferre]

On 10/02/2014 07:09, Bo Shen :
> Add the option to choose clock on which pin input to SSC (as slave).
> Default is on TK pin to SSC, add "atmel,clk-from-rk-pin" option to
> specify the clock is on RK pin to SSC.
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> Changes in v3:
>   - None
> Series-changes: 2
>   - using "-" replace "_" in binding document
> 
>  Documentation/devicetree/bindings/misc/atmel-ssc.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> index a45ae08..5c1e14e 100644
> --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> @@ -14,6 +14,14 @@ Required properties for devices compatible with "atmel,at91sam9g45-ssc":
>    See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
>  - dma-names: Must be "tx", "rx".
>  
> +Optional properties:
> +  - atmel,clk-from-rk-pin: bool property.
> +     - When SSC works in slave mode, according to the hardware design, the
> +       clock can get from TK pin, and also can get from RK pin. So, add
> +       this parameter to choose where the clock from.
> +     - By default the clock is from TK pin, if the clock from RK pin, this
> +       property is needed.
> +
>  Examples:
>  - PDC transfer:
>  ssc0: ssc at fffbc000 {
> 


-- 
Nicolas Ferre

Re: [PATCH v3 2/2] Binding: atmel-ssc: add option to choose clock

[Nicolas Ferre]

On 10/02/2014 07:09, Bo Shen :
> Add the option to choose clock on which pin input to SSC (as slave).
> Default is on TK pin to SSC, add "atmel,clk-from-rk-pin" option to
> specify the clock is on RK pin to SSC.
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> Changes in v3:
>   - None
> Series-changes: 2
>   - using "-" replace "_" in binding document
> 
>  Documentation/devicetree/bindings/misc/atmel-ssc.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> index a45ae08..5c1e14e 100644
> --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
> @@ -14,6 +14,14 @@ Required properties for devices compatible with "atmel,at91sam9g45-ssc":
>    See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
>  - dma-names: Must be "tx", "rx".
>  
> +Optional properties:
> +  - atmel,clk-from-rk-pin: bool property.
> +     - When SSC works in slave mode, according to the hardware design, the
> +       clock can get from TK pin, and also can get from RK pin. So, add
> +       this parameter to choose where the clock from.
> +     - By default the clock is from TK pin, if the clock from RK pin, this
> +       property is needed.
> +
>  Examples:
>  - PDC transfer:
>  ssc0: ssc@fffbc000 {
> 


-- 
Nicolas Ferre

Re: [PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 259 bytes --]

On Mon, Feb 10, 2014 at 02:09:44PM +0800, Bo Shen wrote:
> When SSC work in slave mode, the clock can come from TK pin and also
> can come from RK pin, this is hardware design decided. So, make it
> available to choose where the clock from.

Applied, thanks.

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

[PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock

[Mark Brown]

On Mon, Feb 10, 2014 at 02:09:44PM +0800, Bo Shen wrote:
> When SSC work in slave mode, the clock can come from TK pin and also
> can come from RK pin, this is hardware design decided. So, make it
> available to choose where the clock from.

Applied, thanks.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140212/dbd09126/attachment.sig>

Re: [PATCH v3 0/2] ASoC: atmel_ssc_dai: add option to choose clock

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 259 bytes --]

On Mon, Feb 10, 2014 at 02:09:44PM +0800, Bo Shen wrote:
> When SSC work in slave mode, the clock can come from TK pin and also
> can come from RK pin, this is hardware design decided. So, make it
> available to choose where the clock from.

Applied, thanks.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]