From: santosh.shilimkar@ti.com (Santosh Shilimkar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] ARM: keystone: enable gpio support
Date: Mon, 10 Feb 2014 10:53:42 -0500 [thread overview]
Message-ID: <52F8F606.3020107@ti.com> (raw)
In-Reply-To: <1392050481-19086-1-git-send-email-grygorii.strashko@ti.com>
On Monday 10 February 2014 11:41 AM, Grygorii Strashko wrote:
> This series adds Keystone GPIO IP definition in DT and enable GPIO support in
> Keystone configuration file.
>
> Also, it enables LEDs support for Keystone 2 K2H EVM as specified in board
> schematic. For more information see:
> - http://www.advantech.com/Support/TI-EVM/EVMK2HX.aspx
>
> Changes in v3:
> - rebased on top 3.14 + "[PATCH v2] arm: dts: keystone: add watchdog entry"
> http://www.spinics.net/lists/devicetree/msg20211.html
>
> [v1-v2] http://www.spinics.net/lists/arm-kernel/msg294655.html
>
> Grygorii Strashko (4):
> ARM: dts: keystone: add gpio device entry
> ARM: dts: keystone-evm: add leds supports
> ARM: keystone_defconfig: enable gpio support
> ARM: keystone_defconfig: enable led support
>
Thanks for reposting the patchset Grygorii. I will
take them for the 3.15.
Would be good to get the blessing from DT folks
on first two patches.
Regards,
Santosh
WARNING: multiple messages have this Message-ID (diff)
From: Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org>
To: Grygorii Strashko
<grygorii.strashko-l0cyMroinI0@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
ivan.khoronzhuk-l0cyMroinI0@public.gmane.org,
Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
Mark Rutland <Mark.Rutland-5wv7dgnIgG8@public.gmane.org>
Subject: Re: [PATCH v3 0/4] ARM: keystone: enable gpio support
Date: Mon, 10 Feb 2014 10:53:42 -0500 [thread overview]
Message-ID: <52F8F606.3020107@ti.com> (raw)
In-Reply-To: <1392050481-19086-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
On Monday 10 February 2014 11:41 AM, Grygorii Strashko wrote:
> This series adds Keystone GPIO IP definition in DT and enable GPIO support in
> Keystone configuration file.
>
> Also, it enables LEDs support for Keystone 2 K2H EVM as specified in board
> schematic. For more information see:
> - http://www.advantech.com/Support/TI-EVM/EVMK2HX.aspx
>
> Changes in v3:
> - rebased on top 3.14 + "[PATCH v2] arm: dts: keystone: add watchdog entry"
> http://www.spinics.net/lists/devicetree/msg20211.html
>
> [v1-v2] http://www.spinics.net/lists/arm-kernel/msg294655.html
>
> Grygorii Strashko (4):
> ARM: dts: keystone: add gpio device entry
> ARM: dts: keystone-evm: add leds supports
> ARM: keystone_defconfig: enable gpio support
> ARM: keystone_defconfig: enable led support
>
Thanks for reposting the patchset Grygorii. I will
take them for the 3.15.
Would be good to get the blessing from DT folks
on first two patches.
Regards,
Santosh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-02-10 15:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-10 16:41 [PATCH v3 0/4] ARM: keystone: enable gpio support Grygorii Strashko
2014-02-10 16:41 ` Grygorii Strashko
2014-02-10 15:53 ` Santosh Shilimkar [this message]
2014-02-10 15:53 ` Santosh Shilimkar
2014-02-10 16:41 ` [PATCH v3 1/4] ARM: dts: keystone: add gpio device entry Grygorii Strashko
2014-02-10 16:41 ` Grygorii Strashko
2014-02-10 16:41 ` [PATCH v3 2/4] ARM: dts: keystone-evm: add leds supports Grygorii Strashko
2014-02-10 16:41 ` Grygorii Strashko
2014-02-10 16:41 ` [PATCH v3 3/4] ARM: keystone_defconfig: enable gpio support Grygorii Strashko
2014-02-10 16:41 ` Grygorii Strashko
2014-02-10 16:41 ` [PATCH v3 4/4] ARM: keystone_defconfig: enable led support Grygorii Strashko
2014-02-10 16:41 ` Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F8F606.3020107@ti.com \
--to=santosh.shilimkar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.