From: b.brezillon@overkiz.com (Boris BREZILLON)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91/DT: add NAND + DMA property
Date: Wed, 12 Feb 2014 12:30:06 +0100 [thread overview]
Message-ID: <52FB5B3E.4020401@overkiz.com> (raw)
In-Reply-To: <1392203183-9851-1-git-send-email-nicolas.ferre@atmel.com>
On 12/02/2014 12:06, Nicolas Ferre wrote:
> Add the "atmel,nand-has-dma" property to NAND node for SoC that
> can use the DMA to perform NAND accesses.
> Use of this property was added in 1b7192658a08f70df0f290634fd7cd2ecb629fc9
> (mtd: atmel_nand: add a new dt binding item for nand dma support).
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
> ---
> arch/arm/boot/dts/at91sam9g45.dtsi | 1 +
> arch/arm/boot/dts/at91sam9n12.dtsi | 1 +
> arch/arm/boot/dts/at91sam9x5.dtsi | 1 +
> arch/arm/boot/dts/sama5d3.dtsi | 1 +
> 4 files changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index cbcc058b26b4..9b6683f252cf 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -817,6 +817,7 @@
> >;
> atmel,nand-addr-offset = <21>;
> atmel,nand-cmd-offset = <22>;
> + atmel,nand-has-dma;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_nand>;
> gpios = <&pioC 8 GPIO_ACTIVE_HIGH
> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
> index 394e6ce2afb7..9f04808fc697 100644
> --- a/arch/arm/boot/dts/at91sam9n12.dtsi
> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
> @@ -570,6 +570,7 @@
> atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
> atmel,nand-addr-offset = <21>;
> atmel,nand-cmd-offset = <22>;
> + atmel,nand-has-dma;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_nand>;
> gpios = <&pioD 5 GPIO_ACTIVE_HIGH
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index 174219de92fa..67e32067eb25 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -790,6 +790,7 @@
> atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
> atmel,nand-addr-offset = <21>;
> atmel,nand-cmd-offset = <22>;
> + atmel,nand-has-dma;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_nand>;
> gpios = <&pioD 5 GPIO_ACTIVE_HIGH
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index 3d5faf85f51b..d075c5326ce7 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -1256,6 +1256,7 @@
> interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
> atmel,nand-addr-offset = <21>;
> atmel,nand-cmd-offset = <22>;
> + atmel,nand-has-dma;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_nand0_ale_cle>;
> atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
WARNING: multiple messages have this Message-ID (diff)
From: Boris BREZILLON <b.brezillon@overkiz.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
linux-arm-kernel@lists.infradead.org, Josh Wu <josh.wu@atmel.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: at91/DT: add NAND + DMA property
Date: Wed, 12 Feb 2014 12:30:06 +0100 [thread overview]
Message-ID: <52FB5B3E.4020401@overkiz.com> (raw)
In-Reply-To: <1392203183-9851-1-git-send-email-nicolas.ferre@atmel.com>
On 12/02/2014 12:06, Nicolas Ferre wrote:
> Add the "atmel,nand-has-dma" property to NAND node for SoC that
> can use the DMA to perform NAND accesses.
> Use of this property was added in 1b7192658a08f70df0f290634fd7cd2ecb629fc9
> (mtd: atmel_nand: add a new dt binding item for nand dma support).
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
> ---
> arch/arm/boot/dts/at91sam9g45.dtsi | 1 +
> arch/arm/boot/dts/at91sam9n12.dtsi | 1 +
> arch/arm/boot/dts/at91sam9x5.dtsi | 1 +
> arch/arm/boot/dts/sama5d3.dtsi | 1 +
> 4 files changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index cbcc058b26b4..9b6683f252cf 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -817,6 +817,7 @@
> >;
> atmel,nand-addr-offset = <21>;
> atmel,nand-cmd-offset = <22>;
> + atmel,nand-has-dma;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_nand>;
> gpios = <&pioC 8 GPIO_ACTIVE_HIGH
> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
> index 394e6ce2afb7..9f04808fc697 100644
> --- a/arch/arm/boot/dts/at91sam9n12.dtsi
> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
> @@ -570,6 +570,7 @@
> atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
> atmel,nand-addr-offset = <21>;
> atmel,nand-cmd-offset = <22>;
> + atmel,nand-has-dma;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_nand>;
> gpios = <&pioD 5 GPIO_ACTIVE_HIGH
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index 174219de92fa..67e32067eb25 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -790,6 +790,7 @@
> atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
> atmel,nand-addr-offset = <21>;
> atmel,nand-cmd-offset = <22>;
> + atmel,nand-has-dma;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_nand>;
> gpios = <&pioD 5 GPIO_ACTIVE_HIGH
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index 3d5faf85f51b..d075c5326ce7 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -1256,6 +1256,7 @@
> interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
> atmel,nand-addr-offset = <21>;
> atmel,nand-cmd-offset = <22>;
> + atmel,nand-has-dma;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_nand0_ale_cle>;
> atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
next prev parent reply other threads:[~2014-02-12 11:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-12 11:06 [PATCH] ARM: at91/DT: add NAND + DMA property Nicolas Ferre
2014-02-12 11:06 ` Nicolas Ferre
2014-02-12 11:30 ` Boris BREZILLON [this message]
2014-02-12 11:30 ` Boris BREZILLON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52FB5B3E.4020401@overkiz.com \
--to=b.brezillon@overkiz.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.