All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <archit@ti.com>
To: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/9] Doc/DT: Add OMAP DSS DT Bindings
Date: Tue, 18 Feb 2014 11:55:23 +0000	[thread overview]
Message-ID: <53034A11.2050602@ti.com> (raw)
In-Reply-To: <1392294752-18762-2-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>

Hi,

On Thursday 13 February 2014 06:02 PM, Tomi Valkeinen wrote:
> Add device tree bindings for OMAP Display Subsystem for the following
> SoCs: OMAP2, OMAP3, OMAP4.


>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---

<snip>

> +A shortened example of the board description for OMAP4 Panda board, defined in
> +omap4-panda.dts.
> +
> +The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
> +chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
> +shifter). The video pipelines for the connectors are formed as follows:
> +
> +DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
> +OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI COnnector

Nitpick - 'CO' -> 'Co'

Archit


WARNING: multiple messages have this Message-ID (diff)
From: Archit Taneja <archit-l0cyMroinI0@public.gmane.org>
To: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 1/9] Doc/DT: Add OMAP DSS DT Bindings
Date: Tue, 18 Feb 2014 17:24:57 +0530	[thread overview]
Message-ID: <53034A11.2050602@ti.com> (raw)
In-Reply-To: <1392294752-18762-2-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>

Hi,

On Thursday 13 February 2014 06:02 PM, Tomi Valkeinen wrote:
> Add device tree bindings for OMAP Display Subsystem for the following
> SoCs: OMAP2, OMAP3, OMAP4.


>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>
> ---

<snip>

> +A shortened example of the board description for OMAP4 Panda board, defined in
> +omap4-panda.dts.
> +
> +The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
> +chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
> +shifter). The video pipelines for the connectors are formed as follows:
> +
> +DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
> +OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI COnnector

Nitpick - 'CO' -> 'Co'

Archit

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-02-18 11:55 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-13 12:32 [PATCH 0/9] OMAP DSS DT bindings documentation Tomi Valkeinen
2014-02-13 12:32 ` Tomi Valkeinen
     [not found] ` <1392294752-18762-1-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>
2014-02-13 12:32   ` [PATCH 1/9] Doc/DT: Add OMAP DSS DT Bindings Tomi Valkeinen
2014-02-13 12:32     ` Tomi Valkeinen
     [not found]     ` <1392294752-18762-2-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>
2014-02-18 11:54       ` Archit Taneja [this message]
2014-02-18 11:55         ` Archit Taneja
2014-02-13 12:32   ` [PATCH 2/9] Doc/DT: Add DT binding documentation for Analog TV Connector Tomi Valkeinen
2014-02-13 12:32     ` Tomi Valkeinen
2014-02-13 12:32   ` [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector Tomi Valkeinen
2014-02-13 12:32     ` Tomi Valkeinen
2014-02-13 12:32   ` [PATCH 4/9] Doc/DT: Add DT binding documentation for HDMI Connector Tomi Valkeinen
2014-02-13 12:32     ` Tomi Valkeinen
2014-02-13 12:32   ` [PATCH 5/9] Doc/DT: Add DT binding documentation for MIPI DPI Panel Tomi Valkeinen
2014-02-13 12:32     ` Tomi Valkeinen
2014-02-13 12:32   ` [PATCH 6/9] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel Tomi Valkeinen
2014-02-13 12:32     ` Tomi Valkeinen
2014-02-13 12:32   ` [PATCH 7/9] Doc/DT: Add DT binding documentation for Sony acx565akm panel Tomi Valkeinen
2014-02-13 12:32     ` Tomi Valkeinen
2014-02-13 12:32   ` [PATCH 8/9] Doc/DT: Add DT binding documentation for TFP410 encoder Tomi Valkeinen
2014-02-13 12:32     ` Tomi Valkeinen
2014-02-13 12:32   ` [PATCH 9/9] Doc/DT: Add DT binding documentation for tpd12s015 encoder Tomi Valkeinen
2014-02-13 12:32     ` Tomi Valkeinen
2014-02-18 12:09   ` [PATCH 0/9] OMAP DSS DT bindings documentation Archit Taneja
2014-02-18 12:21     ` Archit Taneja
     [not found]     ` <53034D6F.9080405-l0cyMroinI0@public.gmane.org>
2014-02-28 10:36       ` Tomi Valkeinen
2014-02-28 10:36         ` Tomi Valkeinen
  -- strict thread matches above, loose matches on Subject: below --
2014-02-28 12:20 [PATCH 0/9] Doc/DT: DT bindings for various display components Tomi Valkeinen
     [not found] ` <1393590016-9361-1-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>
2014-02-28 12:20   ` [PATCH 1/9] Doc/DT: Add OMAP DSS DT Bindings Tomi Valkeinen
2014-02-28 12:20     ` Tomi Valkeinen
2014-02-28 12:20     ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53034A11.2050602@ti.com \
    --to=archit@ti.com \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=tomi.valkeinen-l0cyMroinI0@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.