[U-Boot] [PATCH] imx6 SION bit has to be on for the pins that are used as ENET_REF

All of lore.kernel.org
 help / color / mirror / Atom feed

* [U-Boot] [PATCH] imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK
       [not found] <[PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected>
@ 2014-02-12 14:31 ` Andy Ng
  2014-02-19 10:00   ` Stefano Babic
  0 siblings, 1 reply; 2+ messages in thread
From: Andy Ng @ 2014-02-12 14:31 UTC (permalink / raw)
  To: u-boot

Signed-off-by: Andy Ng <andreas2025@gmail.com>
---
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h |    6 +++---
 arch/arm/include/asm/arch-mx6/mx6q_pins.h  |    6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index 55cc9ad..2e414ad 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -647,7 +647,7 @@ MX6_PAD_DECL(ENET_MDIO__ESAI_RX_CLK,	0x05BC, 0x01EC, 2, 0x083C, 0, 0)
 MX6_PAD_DECL(ENET_MDIO__ENET_1588_EVENT1_OUT,	0x05BC, 0x01EC, 4, 0x0000, 0, 0)
 MX6_PAD_DECL(ENET_MDIO__GPIO1_IO22,	0x05BC, 0x01EC, 5, 0x0000, 0, 0)
 MX6_PAD_DECL(ENET_MDIO__SPDIF_LOCK,	0x05BC, 0x01EC, 6, 0x0000, 0, 0)
-MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK,	0x05C0, 0x01F0, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK,	0x05C0, 0x01F0, 1 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
 MX6_PAD_DECL(ENET_REF_CLK__ESAI_RX_FS,	0x05C0, 0x01F0, 2, 0x082C, 0, 0)
 MX6_PAD_DECL(ENET_REF_CLK__GPIO1_IO23,	0x05C0, 0x01F0, 5, 0x0000, 0, 0)
 MX6_PAD_DECL(ENET_REF_CLK__SPDIF_SR_CLK,	0x05C0, 0x01F0, 6, 0x0000, 0, 0)
@@ -695,7 +695,7 @@ MX6_PAD_DECL(GPIO_1__GPIO1_IO01,	0x05E0, 0x0210, 5, 0x0000, 0, 0)
 MX6_PAD_DECL(GPIO_1__SD1_CD_B,	0x05E0, 0x0210, 6, 0x0000, 0, 0)
 MX6_PAD_DECL(GPIO_16__ESAI_TX3_RX2,	0x05E4, 0x0214, 0, 0x0850, 1, 0)
 MX6_PAD_DECL(GPIO_16__ENET_1588_EVENT2_IN,	0x05E4, 0x0214, 1, 0x0000, 0, 0)
-MX6_PAD_DECL(GPIO_16__ENET_REF_CLK,	0x05E4, 0x0214, 2, 0x080C, 0, 0)
+MX6_PAD_DECL(GPIO_16__ENET_REF_CLK,	0x05E4, 0x0214, 2 | IOMUX_CONFIG_SION, 0x080C, 0, 0)
 MX6_PAD_DECL(GPIO_16__SD1_LCTL,	0x05E4, 0x0214, 3, 0x0000, 0, 0)
 MX6_PAD_DECL(GPIO_16__SPDIF_IN,	0x05E4, 0x0214, 4, 0x08F0, 2, 0)
 MX6_PAD_DECL(GPIO_16__GPIO7_IO11,	0x05E4, 0x0214, 5, 0x0000, 0, 0)
@@ -934,7 +934,7 @@ MX6_PAD_DECL(RGMII_TX_CTL__USBOH3_H2_STROBE,	0x06BC, 0x02D4, 0 | IOMUX_CONFIG_SI
 MX6_PAD_DECL(RGMII_TX_CTL__USB_H2_STROBE,	0x06BC, 0x02D4, 0 | IOMUX_CONFIG_SION, 0x0000, 0, PAD_CTL_PUS_47K_UP)
 MX6_PAD_DECL(RGMII_TX_CTL__RGMII_TX_CTL,	0x06BC, 0x02D4, 1, 0x0000, 0, 0)
 MX6_PAD_DECL(RGMII_TX_CTL__GPIO6_IO26,	0x06BC, 0x02D4, 5, 0x0000, 0, 0)
-MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK,	0x06BC, 0x02D4, 7, 0x080C, 1, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK,	0x06BC, 0x02D4, 7 | IOMUX_CONFIG_SION, 0x080C, 1, 0)
 MX6_PAD_DECL(RGMII_TXC__USB_H2_DATA,	0x06C0, 0x02D8, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
 MX6_PAD_DECL(RGMII_TXC__RGMII_TXC,	0x06C0, 0x02D8, 1, 0x0000, 0, 0)
 MX6_PAD_DECL(RGMII_TXC__SPDIF_EXT_CLK,	0x06C0, 0x02D8, 2, 0x08F4, 1, 0)
diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
index ad31c33..a8456a2 100644
--- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
@@ -53,7 +53,7 @@ MX6_PAD_DECL(RGMII_RD0__GPIO6_IO25,	0x0384, 0x0070, 5, 0x0000, 0, 0)
 MX6_PAD_DECL(RGMII_TX_CTL__USB_H2_STROBE,	0x0388, 0x0074, 0, 0x0000, 0, 0)
 MX6_PAD_DECL(RGMII_TX_CTL__RGMII_TX_CTL,	0x0388, 0x0074, 1, 0x0000, 0, 0)
 MX6_PAD_DECL(RGMII_TX_CTL__GPIO6_IO26,	0x0388, 0x0074, 5, 0x0000, 0, 0)
-MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK,	0x0388, 0x0074, 7, 0x083C, 0, 0)
+MX6_PAD_DECL(RGMII_TX_CTL__ENET_REF_CLK,	0x0388, 0x0074, 7 | IOMUX_CONFIG_SION, 0x083C, 0, 0)
 MX6_PAD_DECL(RGMII_RD1__HSI_TX_FLAG,	0x038C, 0x0078, 0, 0x0000, 0, 0)
 MX6_PAD_DECL(RGMII_RD1__RGMII_RD1,	0x038C, 0x0078, 1, 0x084C, 0, 0)
 MX6_PAD_DECL(RGMII_RD1__GPIO6_IO27,	0x038C, 0x0078, 5, 0x0000, 0, 0)
@@ -523,7 +523,7 @@ MX6_PAD_DECL(ENET_MDIO__ESAI_RX_CLK,	0x04E4, 0x01D0, 2, 0x086C, 0, 0)
 MX6_PAD_DECL(ENET_MDIO__ENET_1588_EVENT1_OUT,	0x04E4, 0x01D0, 4, 0x0000, 0, 0)
 MX6_PAD_DECL(ENET_MDIO__GPIO1_IO22,	0x04E4, 0x01D0, 5, 0x0000, 0, 0)
 MX6_PAD_DECL(ENET_MDIO__SPDIF_LOCK,	0x04E4, 0x01D0, 6, 0x0000, 0, 0)
-MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK,	0x04E8, 0x01D4, 1, 0x0000, 0, 0)
+MX6_PAD_DECL(ENET_REF_CLK__ENET_TX_CLK,	0x04E8, 0x01D4, 1 | IOMUX_CONFIG_SION, 0x0000, 0, 0)
 MX6_PAD_DECL(ENET_REF_CLK__ESAI_RX_FS,	0x04E8, 0x01D4, 2, 0x085C, 0, 0)
 MX6_PAD_DECL(ENET_REF_CLK__GPIO1_IO23,	0x04E8, 0x01D4, 5, 0x0000, 0, 0)
 MX6_PAD_DECL(ENET_REF_CLK__SPDIF_SR_CLK,	0x04E8, 0x01D4, 6, 0x0000, 0, 0)
@@ -703,7 +703,7 @@ MX6_PAD_DECL(GPIO_8__SPDIF_SR_CLK,	0x0614, 0x0244, 6, 0x0000, 0, 0)
 MX6_PAD_DECL(GPIO_8__USB_OTG_PWR_CTL_WAKE,	0x0614, 0x0244, 7, 0x0000, 0, 0)
 MX6_PAD_DECL(GPIO_16__ESAI_TX3_RX2,	0x0618, 0x0248, 0, 0x0880, 1, 0)
 MX6_PAD_DECL(GPIO_16__ENET_1588_EVENT2_IN,	0x0618, 0x0248, 1, 0x0000, 0, 0)
-MX6_PAD_DECL(GPIO_16__ENET_REF_CLK,	0x0618, 0x0248, 2, 0x083C, 1, 0)
+MX6_PAD_DECL(GPIO_16__ENET_REF_CLK,	0x0618, 0x0248, 2 | IOMUX_CONFIG_SION, 0x083C, 1, 0)
 MX6_PAD_DECL(GPIO_16__SD1_LCTL,	0x0618, 0x0248, 3, 0x0000, 0, 0)
 MX6_PAD_DECL(GPIO_16__SPDIF_IN,	0x0618, 0x0248, 4, 0x0914, 3, 0)
 MX6_PAD_DECL(GPIO_16__GPIO7_IO11,	0x0618, 0x0248, 5, 0x0000, 0, 0)
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [U-Boot] [PATCH] imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK
  2014-02-12 14:31 ` [U-Boot] [PATCH] imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK Andy Ng
@ 2014-02-19 10:00   ` Stefano Babic
  0 siblings, 0 replies; 2+ messages in thread
From: Stefano Babic @ 2014-02-19 10:00 UTC (permalink / raw)
  To: u-boot

Hi Andy,

On 12/02/2014 15:31, Andy Ng wrote:
> Signed-off-by: Andy Ng <andreas2025@gmail.com>
> ---


Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2014-02-19 10:00 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <[PATCH imx6dl] Enable SION Bit for GPIO16 when ALT2 mode is selected>
2014-02-12 14:31 ` [U-Boot] [PATCH] imx6 SION bit has to be on for the pins that are used as ENET_REF_CLK Andy Ng
2014-02-19 10:00   ` Stefano Babic

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.