From: Omar Pighi <pighi@selea.com>
To: meta-freescale@yoctoproject.org
Subject: sabrelite kernel 3.10.17 don't boot:
Date: Fri, 21 Feb 2014 17:11:30 +0100 [thread overview]
Message-ID: <53077AB2.6060009@selea.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 296 bytes --]
To complete my previous email on this issue:
here you can see the boot process: tilll
Staring kernel ...
then nothing more:
Any idea?
--
Dott. Ing. Omar Pighi
R&D Selea s.r.l.
Via A.Moro 69
46015 Cicognara (MN)
ITALY
tel +39-0375-889091
fax +39-0375-889080
web:www.selea.com
[-- Attachment #2: sabrelite_boot.TXT --]
[-- Type: text/plain, Size: 1874 bytes --]
\rU-Boot 2013.10-00101-ge20f07c (Jan 22 2014 - 13:30:39)
\rCPU: Freescale i.MX6Q rev1.2 at 792 MHz
\rCPU: Temperature 37 C, calibration data: 0x5cc52b7d
\rReset cause: POR
\rBoard: SABRE Lite
\rDRAM: 1 GiB
\rMMC: FSL_SDHC: 0, FSL_SDHC: 1
\rSF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB, total 2 MiB
\r*** Warning - bad CRC, using default environment
\rNo panel detected: default to HDMI
\rDisplay: HDMI (1024x768)
\rIn: serial
\rOut: serial
\rErr: serial
\rNet: using phy at 6
\rFEC [PRIME]
\rHit any key to stop autoboot: 1 \b\b\b 0
\rAHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
\rflags: ncq stag pm led clo only pmp pio slum part
\rNo port device detected!
\r** Bad device size - sata 0 **
\r** Bad device size - sata 0 **
\rSATA device 1: unknown device
\r** Bad device sata 1 **
\r** Bad device sata 1 **
\rMMC: no card present
\rmmc0(part 0) is current device
\rMMC: no card present
\r** Bad device mmc 0 **
\rMMC: no card present
\r** Bad device mmc 0 **
\rmmc1 is current device
\rreading /6x_bootscript
\r2875 bytes read in 15 ms (186.5 KiB/s)
\r## Executing script at 10008000
\rSetting bus to 1
\rValid chip addresses:
\r------ no HDMI monitor
\rSetting bus to 2
\rValid chip addresses:
\r------ no Freescale display
\rValid chip addresses:
\r------ no ft5x06 touch controller
\rValid chip addresses:
\r------ no 800x480 display
\rreading /imx6q-sabrelite.dtb
\r** Unable to read file /imx6q-sabrelite.dtb **
\ronly CEA modes allowed on HDMI port
\rreading /uImage
\r4499800 bytes read in 210 ms (20.4 MiB/s)
\r## Booting kernel from Legacy Image at 10800000 ...
\r Image Name: Linux-3.10.173.10.17_beta+yocto+
\r Image Type: ARM Linux Kernel Image (uncompressed)
\r Data Size: 4499736 Bytes = 4.3 MiB
\r Load Address: 10008000
\r Entry Point: 10008000
\r Verifying Checksum ... OK
\r Loading Kernel Image ... OK
\rStarting kernel ...
\r
next reply other threads:[~2014-02-21 16:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-21 16:11 Omar Pighi [this message]
2014-02-21 16:19 ` sabrelite kernel 3.10.17 don't boot: John Weber
2014-02-21 16:45 ` Eric Nelson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53077AB2.6060009@selea.com \
--to=pighi@selea.com \
--cc=meta-freescale@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.