sabrelite kernel 3.10.17 don't boot:

sabrelite kernel 3.10.17 don't boot:

[Omar Pighi]

[-- Attachment #1: Type: text/plain, Size: 296 bytes --]

To complete my previous email on this issue:
here you can see the boot process: tilll
Staring kernel ...
then nothing more:

Any idea?

-- 
Dott. Ing. Omar Pighi
R&D Selea s.r.l.
Via A.Moro 69
46015 Cicognara (MN)
ITALY
tel +39-0375-889091
fax +39-0375-889080
web:www.selea.com


[-- Attachment #2: sabrelite_boot.TXT --]
[-- Type: text/plain, Size: 1874 bytes --]



\rU-Boot 2013.10-00101-ge20f07c (Jan 22 2014 - 13:30:39)

\rCPU:   Freescale i.MX6Q rev1.2 at 792 MHz
\rCPU:   Temperature 37 C, calibration data: 0x5cc52b7d
\rReset cause: POR
\rBoard: SABRE Lite
\rDRAM:  1 GiB
\rMMC:   FSL_SDHC: 0, FSL_SDHC: 1
\rSF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB, total 2 MiB
\r*** Warning - bad CRC, using default environment

\rNo panel detected: default to HDMI
\rDisplay: HDMI (1024x768)
\rIn:    serial
\rOut:   serial
\rErr:   serial
\rNet:   using phy at 6
\rFEC [PRIME]
\rHit any key to stop autoboot:  1 \b\b\b 0 
\rAHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
\rflags: ncq stag pm led clo only pmp pio slum part 
\rNo port device detected!
\r** Bad device size - sata 0 **
\r** Bad device size - sata 0 **

\rSATA device 1: unknown device
\r** Bad device sata 1 **
\r** Bad device sata 1 **
\rMMC: no card present
\rmmc0(part 0) is current device
\rMMC: no card present
\r** Bad device mmc 0 **
\rMMC: no card present
\r** Bad device mmc 0 **
\rmmc1 is current device
\rreading /6x_bootscript
\r2875 bytes read in 15 ms (186.5 KiB/s)
\r## Executing script at 10008000
\rSetting bus to 1
\rValid chip addresses:
\r------ no HDMI monitor
\rSetting bus to 2
\rValid chip addresses:
\r------ no Freescale display
\rValid chip addresses:
\r------ no ft5x06 touch controller
\rValid chip addresses:
\r------ no 800x480 display
\rreading /imx6q-sabrelite.dtb
\r** Unable to read file /imx6q-sabrelite.dtb **
\ronly CEA modes allowed on HDMI port
\rreading /uImage
\r4499800 bytes read in 210 ms (20.4 MiB/s)
\r## Booting kernel from Legacy Image at 10800000 ...
\r   Image Name:   Linux-3.10.173.10.17_beta+yocto+
\r   Image Type:   ARM Linux Kernel Image (uncompressed)
\r   Data Size:    4499736 Bytes = 4.3 MiB
\r   Load Address: 10008000
\r   Entry Point:  10008000
\r   Verifying Checksum ... OK
\r   Loading Kernel Image ... OK

\rStarting kernel ...

\r

Re: sabrelite kernel 3.10.17 don't boot:

[John Weber]

[-- Attachment #1: Type: text/html, Size: 1322 bytes --]

Re: sabrelite kernel 3.10.17 don't boot:

[Eric Nelson]

On 02/21/2014 09:11 AM, Omar Pighi wrote:
> To complete my previous email on this issue:
> here you can see the boot process: tilll
> Staring kernel ...
> then nothing more:
>
> Any idea?
>

Hi Omar,

What files do you have in your boot partition?

The problem is that the DTB file isn't present:

** Unable to read file /imx6q-sabrelite.dtb **

Is the file in your /tmp/deploy/images/ directory?

Please advise,


Eric