[PATCH 1/2] ARM: dts: Add wake up key to Arndale octa board

[PATCH 1/2] ARM: dts: Add wake up key to Arndale octa board

[Sachin Kamat]

Added GPIO based wake up key to Arndale octa board.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
 arch/arm/boot/dts/exynos5420-arndale-octa.dts |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index edd933feaf48..240caab5129f 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -12,6 +12,7 @@
 /dts-v1/;
 #include "exynos5420.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
@@ -349,4 +350,14 @@
 		};
 	};
 
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "SW-TACT1";
+			gpios = <&gpx2 7 1>;
+			linux,code = <KEY_WAKEUP>;
+			gpio-key,wakeup;
+		};
+	};
 };
-- 
1.7.9.5

[PATCH 2/2] ARM: dts: Add vmmc-supply to MMC on Arndale octa board

[Sachin Kamat]

LDO10 is directly connected to MMC controller. Register this
through vmmc-supply property.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
 arch/arm/boot/dts/exynos5420-arndale-octa.dts |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 240caab5129f..9f3a3231158b 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -48,6 +48,7 @@
 		samsung,dw-mshc-ddr-timing = <0 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+		vmmc-supply = <&ldo10_reg>;
 
 		slot@0 {
 			reg = <0>;
@@ -64,6 +65,7 @@
 		samsung,dw-mshc-ddr-timing = <1 2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		vmmc-supply = <&ldo10_reg>;
 
 		slot@0 {
 			reg = <0>;
-- 
1.7.9.5

Re: [PATCH 1/2] ARM: dts: Add wake up key to Arndale octa board

[Kukjin Kim]

On 12/18/13 17:45, Sachin Kamat wrote:
> Added GPIO based wake up key to Arndale octa board.
>
> Signed-off-by: Sachin Kamat<sachin.kamat@linaro.org>
> ---
>   arch/arm/boot/dts/exynos5420-arndale-octa.dts |   11 +++++++++++
>   1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> index edd933feaf48..240caab5129f 100644
> --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
> @@ -12,6 +12,7 @@
>   /dts-v1/;
>   #include "exynos5420.dtsi"
>   #include<dt-bindings/interrupt-controller/irq.h>
> +#include<dt-bindings/input/input.h>
>
>   / {
>   	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
> @@ -349,4 +350,14 @@
>   		};
>   	};
>
> +	gpio_keys {
> +		compatible = "gpio-keys";
> +
> +		wakeup {
> +			label = "SW-TACT1";
> +			gpios =<&gpx2 7 1>;
> +			linux,code =<KEY_WAKEUP>;
> +			gpio-key,wakeup;
> +		};
> +	};
>   };

Applied with 2/2 patch, thanks.

- Kukjin