[PATCHv6][ 1/5] video: mx3fb: Use devm_kzalloc

[PATCHv6][ 1/5] video: mx3fb: Use devm_kzalloc

[Denis Carikli]

Replace kzalloc by devm_kzalloc and remove the kfree() calls.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Bénard <eric@eukrea.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
 - New patch needed by "video: mx3fb: Add device tree suport."
---
 drivers/video/mx3fb.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 142e860..ee95de8 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -1496,7 +1496,7 @@ static int mx3fb_probe(struct platform_device *pdev)
 	if (!sdc_reg)
 		return -EINVAL;
 
-	mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+	mx3fb = devm_kzalloc(&pdev->dev, sizeof(*mx3fb), GFP_KERNEL);
 	if (!mx3fb)
 		return -ENOMEM;
 
@@ -1542,7 +1542,6 @@ ersdc0:
 	dmaengine_put();
 	iounmap(mx3fb->reg_base);
 eremap:
-	kfree(mx3fb);
 	dev_err(dev, "mx3fb: failed to register fb\n");
 	return ret;
 }
@@ -1561,7 +1560,6 @@ static int mx3fb_remove(struct platform_device *dev)
 	dmaengine_put();
 
 	iounmap(mx3fb->reg_base);
-	kfree(mx3fb);
 	return 0;
 }
 
-- 
1.7.9.5

[PATCHv6][ 1/5] video: mx3fb: Use devm_kzalloc

[Denis Carikli]

Replace kzalloc by devm_kzalloc and remove the kfree() calls.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric B?nard <eric@eukrea.com>
Cc: linux-fbdev at vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
 - New patch needed by "video: mx3fb: Add device tree suport."
---
 drivers/video/mx3fb.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 142e860..ee95de8 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -1496,7 +1496,7 @@ static int mx3fb_probe(struct platform_device *pdev)
 	if (!sdc_reg)
 		return -EINVAL;
 
-	mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+	mx3fb = devm_kzalloc(&pdev->dev, sizeof(*mx3fb), GFP_KERNEL);
 	if (!mx3fb)
 		return -ENOMEM;
 
@@ -1542,7 +1542,6 @@ ersdc0:
 	dmaengine_put();
 	iounmap(mx3fb->reg_base);
 eremap:
-	kfree(mx3fb);
 	dev_err(dev, "mx3fb: failed to register fb\n");
 	return ret;
 }
@@ -1561,7 +1560,6 @@ static int mx3fb_remove(struct platform_device *dev)
 	dmaengine_put();
 
 	iounmap(mx3fb->reg_base);
-	kfree(mx3fb);
 	return 0;
 }
 
-- 
1.7.9.5

[PATCHv6][ 2/5] video: mx3fb: Add device tree suport.

[Denis Carikli]

This patch is based on:
  838bdf7 video: mxsfb: fix broken videomode selection

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Bénard <eric@eukrea.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
- Shrinked the Cc list.
- de-active and pixelclk-active dt properties are
  now handled in this patch to get rid of the
  "fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*" patch

ChangeLog v4->v5:
- Added some people in the Cc list.
- The full ipu register range is now passed to the driver,
  the code and the documentation were adapted to it.
- Updated the documentation not to mention the lcd controller, the ipu was
  mentioned instead.
- The ipu patch was removed from this patchset, as a consequence the mx3fb code
  has been adapted not to expect the dma ipu driver to be probed trough the device tree.

ChangeLog v3->v4:
- Updated bindings.
- Updated documentation accordinly.
- Updated code accordinly.
- Fixed the lack of "ret =" in
  of_property_read_string(display_np, "model", &name);
- Supressed some compilation warnings.

ChangeLog v2->v3:
- The device tree bindings were reworked in order to make it look more like the
  IPUv3 bindings.
- The interface_pix_fmt property now looks like the IPUv3 one.
---
 .../devicetree/bindings/video/fsl,mx3-fb.txt       |   44 +++++
 drivers/video/Kconfig                              |    2 +
 drivers/video/mx3fb.c                              |  185 +++++++++++++++++---
 3 files changed, 208 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt

diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
new file mode 100644
index 0000000..c0409a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
@@ -0,0 +1,44 @@
+Freescale MX3 IPU.
+=========
+
+Required properties:
+- compatible: Should be "fsl,<chip>-ipu". compatible chips include the imx31 and the
+  imx35.
+- reg: should be register base and length as documented in the datasheet.
+- clocks: Handle to the ipu_gate clock.
+- display: Phandle to a "fsl,mx3-parallel-display" compatible display node
+  which is described below.
+
+Example:
+
+ipu: ipu@53fc0000 {
+	compatible = "fsl,imx35-ipu";
+	reg = <0x53fc0000 0x4000>;
+	clocks = <&clks 55>;
+};
+
+Parallel display support
+============
+
+Required properties:
+- compatible: Should be "fsl,mx3-parallel-display".
+- model : The user-visible name of the display.
+
+Optional properties:
+- interface_pix_fmt: How this display is connected to the
+  crtc. Currently supported types: "rgb24", "rgb565", "rgb666".
+
+It can also have an optional timing subnode as described in
+  Documentation/devicetree/bindings/video/display-timing.txt.
+
+Example:
+
+display0: display@di0 {
+	compatible = "fsl,mx3-parallel-display";
+	interface-pix-fmt = "rgb666";
+	model = "CMO-QVGA";
+};
+
+&ipu {
+	display = <&display0>;
+}
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index dade5b7..e98abf7 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2376,6 +2376,8 @@ config FB_MX3
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEOMODE_HELPERS
+	select FB_MODE_HELPERS
 	default y
 	help
 	  This is a framebuffer device for the i.MX31 LCD Controller. So
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index ee95de8..952d2b5 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -31,6 +31,10 @@
 #include <linux/platform_data/dma-imx.h>
 #include <linux/platform_data/video-mx3fb.h>
 
+#include <video/of_display_timing.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
@@ -237,6 +241,8 @@ static const struct fb_videomode mx3fb_modedb[] = {
 
 struct mx3fb_data {
 	struct fb_info		*fbi;
+	struct videomode	*vm;
+	struct fb_videomode	*fb_vm;
 	int			backlight_level;
 	void __iomem		*reg_base;
 	spinlock_t		lock;
@@ -269,6 +275,7 @@ struct mx3fb_info {
 	struct scatterlist		sg[2];
 
 	struct fb_var_screeninfo	cur_var; /* current var info */
+	uint32_t			flags;
 };
 
 static void mx3fb_dma_done(void *);
@@ -753,16 +760,32 @@ static int __set_par(struct fb_info *fbi, bool lock)
 
 	if (mx3_fbi->ipu_ch = IDMAC_SDC_0) {
 		memset(&sig_cfg, 0, sizeof(sig_cfg));
+
 		if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
 			sig_cfg.Hsync_pol = true;
+
 		if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
 			sig_cfg.Vsync_pol = true;
-		if (fbi->var.sync & FB_SYNC_CLK_INVERT)
-			sig_cfg.clk_pol = true;
+
+		if (fbi->device->of_node) {
+			if (mx3_fbi->flags & FB_SYNC_CLK_INVERT)
+				sig_cfg.clk_pol = true;
+		} else {
+			if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+				sig_cfg.clk_pol = true;
+		}
+
 		if (fbi->var.sync & FB_SYNC_DATA_INVERT)
 			sig_cfg.data_pol = true;
-		if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
-			sig_cfg.enable_pol = true;
+
+		if (fbi->device->of_node) {
+			if (mx3_fbi->flags & FB_SYNC_OE_ACT_HIGH)
+				sig_cfg.enable_pol = true;
+		} else {
+			if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+				sig_cfg.enable_pol = true;
+		}
+
 		if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
 			sig_cfg.clkidle_en = true;
 		if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
@@ -1266,7 +1289,8 @@ static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
 						  &addr, GFP_DMA | GFP_KERNEL);
 
 	if (!fbi->screen_base) {
-		dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+		dev_err(fbi->device,
+			"Cannot allocate %u bytes framebuffer memory\n",
 			mem_len);
 		retval = -EBUSY;
 		goto err0;
@@ -1280,7 +1304,8 @@ static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
 		mutex_unlock(&fbi->mm_lock);
 
 	dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
-		(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+		(uint32_t) fbi->fix.smem_start,
+		fbi->screen_base, fbi->fix.smem_len);
 
 	fbi->screen_size = fbi->fix.smem_len;
 
@@ -1351,21 +1376,68 @@ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
 	return fbi;
 }
 
+static int match_dt_disp_data(const char *property)
+{
+	if (!strcmp("rgb666", property))
+		return IPU_DISP_DATA_MAPPING_RGB666;
+	else if (!strcmp("rgb565", property))
+		return IPU_DISP_DATA_MAPPING_RGB565;
+	else if (!strcmp("rgb24", property))
+		return IPU_DISP_DATA_MAPPING_RGB888;
+	else
+		return -EINVAL;
+}
+
 static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 {
 	struct device *dev = mx3fb->dev;
 	struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
-	const char *name = mx3fb_pdata->name;
+	struct device_node *np = dev->of_node;
+	const char *name;
+	const char *ipu_disp_format;
 	unsigned int irq;
 	struct fb_info *fbi;
 	struct mx3fb_info *mx3fbi;
 	const struct fb_videomode *mode;
 	int ret, num_modes;
+	struct device_node *display_np = NULL;
+
+	if (np) {
+		display_np = of_parse_phandle(np, "display", 0);
+		if (!display_np) {
+			dev_err(dev, "Can't get the display device node.\n");
+			return -EINVAL;
+		}
+
+		of_property_read_string(display_np, "interface-pix-fmt",
+					&ipu_disp_format);
+		if (!ipu_disp_format) {
+			mx3fb->disp_data_fmt = IPU_DISP_DATA_MAPPING_RGB666;
+			dev_warn(dev,
+				"ipu display data mapping was not defined, using the default rgb666.\n");
+		} else {
+			mx3fb->disp_data_fmt +				match_dt_disp_data(ipu_disp_format);
+		}
 
-	if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
-		dev_err(dev, "Illegal display data format %d\n",
+		if (mx3fb->disp_data_fmt = -EINVAL) {
+			dev_err(dev, "Illegal display data format \"%s\"\n",
+				ipu_disp_format);
+			return -EINVAL;
+		}
+
+		ret = of_property_read_string(display_np, "model", &name);
+		if (ret) {
+			dev_err(dev, "Missing display model name\n");
+			return -EINVAL;
+		}
+	} else {
+		name = mx3fb_pdata->name;
+		if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
+			dev_err(dev, "Illegal display data format %d\n",
 				mx3fb_pdata->disp_data_fmt);
-		return -EINVAL;
+			return -EINVAL;
+		}
 	}
 
 	ichan->client = mx3fb;
@@ -1386,12 +1458,36 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 		goto emode;
 	}
 
-	if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
-		mode = mx3fb_pdata->mode;
-		num_modes = mx3fb_pdata->num_modes;
+	mx3fbi = fbi->par;
+
+	if (np) {
+		ret = of_get_videomode(display_np, mx3fb->vm,
+				       OF_USE_NATIVE_MODE);
+		if (ret) {
+			dev_err(dev, "failed to get videomode from DT\n");
+			goto put_display_node;
+		}
+
+		ret = fb_videomode_from_videomode(mx3fb->vm, mx3fb->fb_vm);
+		if (ret < 0)
+			goto put_display_node;
+
+		if (mx3fb->vm->flags & DISPLAY_FLAGS_DE_HIGH)
+			mx3fbi->flags |= FB_SYNC_OE_ACT_HIGH;
+
+		if (mx3fb->vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+			mx3fbi->flags |= FB_SYNC_CLK_INVERT;
+
+		mode = mx3fb->fb_vm;
+		num_modes = 1;
 	} else {
-		mode = mx3fb_modedb;
-		num_modes = ARRAY_SIZE(mx3fb_modedb);
+		if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+			mode = mx3fb_pdata->mode;
+			num_modes = mx3fb_pdata->num_modes;
+		} else {
+			mode = mx3fb_modedb;
+			num_modes = ARRAY_SIZE(mx3fb_modedb);
+		}
 	}
 
 	if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
@@ -1415,13 +1511,13 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 	sdc_set_global_alpha(mx3fb, true, 0xFF);
 	sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
 
-	mx3fbi			= fbi->par;
 	mx3fbi->idmac_channel	= ichan;
 	mx3fbi->ipu_ch		= ichan->dma_chan.chan_id;
 	mx3fbi->mx3fb		= mx3fb;
 	mx3fbi->blank		= FB_BLANK_NORMAL;
 
-	mx3fb->disp_data_fmt	= mx3fb_pdata->disp_data_fmt;
+	if (!np)
+		mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
 
 	init_completion(&mx3fbi->flip_cmpl);
 	disable_irq(ichan->eof_irq);
@@ -1440,6 +1536,8 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 
 	return 0;
 
+put_display_node:
+	of_node_put(display_np);
 erfb:
 esetpar:
 emode:
@@ -1455,17 +1553,21 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
 	struct device *dev;
 	struct mx3fb_platform_data *mx3fb_pdata;
 
-	if (!imx_dma_is_ipu(chan))
-		return false;
-
 	if (!rq)
 		return false;
 
 	dev = rq->mx3fb->dev;
 	mx3fb_pdata = dev_get_platdata(dev);
 
-	return rq->id = chan->chan_id &&
-		mx3fb_pdata->dma_dev = chan->device->dev;
+	if (!imx_dma_is_ipu(chan) && mx3fb_pdata)
+		return false;
+
+	/* When using the devicetree, mx3fb_pdata is NULL */
+	if (mx3fb_pdata)
+		return rq->id = chan->chan_id &&
+			mx3fb_pdata->dma_dev = chan->device->dev;
+	else
+		return rq->id = chan->chan_id;
 }
 
 static void release_fbi(struct fb_info *fbi)
@@ -1487,6 +1589,9 @@ static int mx3fb_probe(struct platform_device *pdev)
 	dma_cap_mask_t mask;
 	struct dma_chan *chan;
 	struct dma_chan_request rq;
+	struct device_node *np = dev->of_node;
+	struct videomode *vm;
+	struct fb_videomode *fb_vm;
 
 	/*
 	 * Display Interface (DI) and Synchronous Display Controller (SDC)
@@ -1508,7 +1613,33 @@ static int mx3fb_probe(struct platform_device *pdev)
 		goto eremap;
 	}
 
-	pr_debug("Remapped %pR at %p\n", sdc_reg, mx3fb->reg_base);
+	/* The full IPU registers range is passed by the device tree,
+	 * whereas the platform data only passes the SDC registers range.
+	 */
+	if (np) {
+		vm = devm_kzalloc(&pdev->dev, sizeof(struct videomode),
+				  GFP_KERNEL);
+		if (!vm) {
+			ret = -ENOMEM;
+			goto eremap;
+		}
+
+		fb_vm = devm_kzalloc(&pdev->dev, sizeof(struct fb_videomode),
+				     GFP_KERNEL);
+		if (!fb_vm) {
+			ret = -ENOMEM;
+			goto eremap;
+		}
+
+		mx3fb->vm = vm;
+		mx3fb->fb_vm = fb_vm;
+
+		mx3fb->reg_base += MX3FB_REG_OFFSET;
+		pr_debug("Remapped %pR at %p\n", sdc_reg + MX3FB_REG_OFFSET,
+			 mx3fb->reg_base);
+	} else {
+		pr_debug("Remapped %pR at %p\n", sdc_reg, mx3fb->reg_base);
+	}
 
 	/* IDMAC interface */
 	dmaengine_get();
@@ -1563,9 +1694,17 @@ static int mx3fb_remove(struct platform_device *dev)
 	return 0;
 }
 
+static struct of_device_id mx3fb_of_dev_id[] = {
+	{ .compatible = "fsl,imx31-ipu", },
+	{ .compatible = "fsl,imx35-ipu", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mx3fb_of_dev_id);
+
 static struct platform_driver mx3fb_driver = {
 	.driver = {
 		.name = MX3FB_NAME,
+		.of_match_table = mx3fb_of_dev_id,
 		.owner = THIS_MODULE,
 	},
 	.probe = mx3fb_probe,
-- 
1.7.9.5

[PATCHv6][ 2/5] video: mx3fb: Add device tree suport.

[Denis Carikli]

This patch is based on:
  838bdf7 video: mxsfb: fix broken videomode selection

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric B?nard <eric@eukrea.com>
Cc: linux-fbdev at vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
- Shrinked the Cc list.
- de-active and pixelclk-active dt properties are
  now handled in this patch to get rid of the
  "fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*" patch

ChangeLog v4->v5:
- Added some people in the Cc list.
- The full ipu register range is now passed to the driver,
  the code and the documentation were adapted to it.
- Updated the documentation not to mention the lcd controller, the ipu was
  mentioned instead.
- The ipu patch was removed from this patchset, as a consequence the mx3fb code
  has been adapted not to expect the dma ipu driver to be probed trough the device tree.

ChangeLog v3->v4:
- Updated bindings.
- Updated documentation accordinly.
- Updated code accordinly.
- Fixed the lack of "ret =" in
  of_property_read_string(display_np, "model", &name);
- Supressed some compilation warnings.

ChangeLog v2->v3:
- The device tree bindings were reworked in order to make it look more like the
  IPUv3 bindings.
- The interface_pix_fmt property now looks like the IPUv3 one.
---
 .../devicetree/bindings/video/fsl,mx3-fb.txt       |   44 +++++
 drivers/video/Kconfig                              |    2 +
 drivers/video/mx3fb.c                              |  185 +++++++++++++++++---
 3 files changed, 208 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/fsl,mx3-fb.txt

diff --git a/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
new file mode 100644
index 0000000..c0409a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,mx3-fb.txt
@@ -0,0 +1,44 @@
+Freescale MX3 IPU.
+==================
+
+Required properties:
+- compatible: Should be "fsl,<chip>-ipu". compatible chips include the imx31 and the
+  imx35.
+- reg: should be register base and length as documented in the datasheet.
+- clocks: Handle to the ipu_gate clock.
+- display: Phandle to a "fsl,mx3-parallel-display" compatible display node
+  which is described below.
+
+Example:
+
+ipu: ipu at 53fc0000 {
+	compatible = "fsl,imx35-ipu";
+	reg = <0x53fc0000 0x4000>;
+	clocks = <&clks 55>;
+};
+
+Parallel display support
+========================
+
+Required properties:
+- compatible: Should be "fsl,mx3-parallel-display".
+- model : The user-visible name of the display.
+
+Optional properties:
+- interface_pix_fmt: How this display is connected to the
+  crtc. Currently supported types: "rgb24", "rgb565", "rgb666".
+
+It can also have an optional timing subnode as described in
+  Documentation/devicetree/bindings/video/display-timing.txt.
+
+Example:
+
+display0: display at di0 {
+	compatible = "fsl,mx3-parallel-display";
+	interface-pix-fmt = "rgb666";
+	model = "CMO-QVGA";
+};
+
+&ipu {
+	display = <&display0>;
+}
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index dade5b7..e98abf7 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2376,6 +2376,8 @@ config FB_MX3
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEOMODE_HELPERS
+	select FB_MODE_HELPERS
 	default y
 	help
 	  This is a framebuffer device for the i.MX31 LCD Controller. So
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index ee95de8..952d2b5 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -31,6 +31,10 @@
 #include <linux/platform_data/dma-imx.h>
 #include <linux/platform_data/video-mx3fb.h>
 
+#include <video/of_display_timing.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
@@ -237,6 +241,8 @@ static const struct fb_videomode mx3fb_modedb[] = {
 
 struct mx3fb_data {
 	struct fb_info		*fbi;
+	struct videomode	*vm;
+	struct fb_videomode	*fb_vm;
 	int			backlight_level;
 	void __iomem		*reg_base;
 	spinlock_t		lock;
@@ -269,6 +275,7 @@ struct mx3fb_info {
 	struct scatterlist		sg[2];
 
 	struct fb_var_screeninfo	cur_var; /* current var info */
+	uint32_t			flags;
 };
 
 static void mx3fb_dma_done(void *);
@@ -753,16 +760,32 @@ static int __set_par(struct fb_info *fbi, bool lock)
 
 	if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
 		memset(&sig_cfg, 0, sizeof(sig_cfg));
+
 		if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
 			sig_cfg.Hsync_pol = true;
+
 		if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
 			sig_cfg.Vsync_pol = true;
-		if (fbi->var.sync & FB_SYNC_CLK_INVERT)
-			sig_cfg.clk_pol = true;
+
+		if (fbi->device->of_node) {
+			if (mx3_fbi->flags & FB_SYNC_CLK_INVERT)
+				sig_cfg.clk_pol = true;
+		} else {
+			if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+				sig_cfg.clk_pol = true;
+		}
+
 		if (fbi->var.sync & FB_SYNC_DATA_INVERT)
 			sig_cfg.data_pol = true;
-		if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
-			sig_cfg.enable_pol = true;
+
+		if (fbi->device->of_node) {
+			if (mx3_fbi->flags & FB_SYNC_OE_ACT_HIGH)
+				sig_cfg.enable_pol = true;
+		} else {
+			if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+				sig_cfg.enable_pol = true;
+		}
+
 		if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
 			sig_cfg.clkidle_en = true;
 		if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
@@ -1266,7 +1289,8 @@ static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
 						  &addr, GFP_DMA | GFP_KERNEL);
 
 	if (!fbi->screen_base) {
-		dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+		dev_err(fbi->device,
+			"Cannot allocate %u bytes framebuffer memory\n",
 			mem_len);
 		retval = -EBUSY;
 		goto err0;
@@ -1280,7 +1304,8 @@ static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len,
 		mutex_unlock(&fbi->mm_lock);
 
 	dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
-		(uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+		(uint32_t) fbi->fix.smem_start,
+		fbi->screen_base, fbi->fix.smem_len);
 
 	fbi->screen_size = fbi->fix.smem_len;
 
@@ -1351,21 +1376,68 @@ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
 	return fbi;
 }
 
+static int match_dt_disp_data(const char *property)
+{
+	if (!strcmp("rgb666", property))
+		return IPU_DISP_DATA_MAPPING_RGB666;
+	else if (!strcmp("rgb565", property))
+		return IPU_DISP_DATA_MAPPING_RGB565;
+	else if (!strcmp("rgb24", property))
+		return IPU_DISP_DATA_MAPPING_RGB888;
+	else
+		return -EINVAL;
+}
+
 static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 {
 	struct device *dev = mx3fb->dev;
 	struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
-	const char *name = mx3fb_pdata->name;
+	struct device_node *np = dev->of_node;
+	const char *name;
+	const char *ipu_disp_format;
 	unsigned int irq;
 	struct fb_info *fbi;
 	struct mx3fb_info *mx3fbi;
 	const struct fb_videomode *mode;
 	int ret, num_modes;
+	struct device_node *display_np = NULL;
+
+	if (np) {
+		display_np = of_parse_phandle(np, "display", 0);
+		if (!display_np) {
+			dev_err(dev, "Can't get the display device node.\n");
+			return -EINVAL;
+		}
+
+		of_property_read_string(display_np, "interface-pix-fmt",
+					&ipu_disp_format);
+		if (!ipu_disp_format) {
+			mx3fb->disp_data_fmt = IPU_DISP_DATA_MAPPING_RGB666;
+			dev_warn(dev,
+				"ipu display data mapping was not defined, using the default rgb666.\n");
+		} else {
+			mx3fb->disp_data_fmt =
+				match_dt_disp_data(ipu_disp_format);
+		}
 
-	if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
-		dev_err(dev, "Illegal display data format %d\n",
+		if (mx3fb->disp_data_fmt == -EINVAL) {
+			dev_err(dev, "Illegal display data format \"%s\"\n",
+				ipu_disp_format);
+			return -EINVAL;
+		}
+
+		ret = of_property_read_string(display_np, "model", &name);
+		if (ret) {
+			dev_err(dev, "Missing display model name\n");
+			return -EINVAL;
+		}
+	} else {
+		name = mx3fb_pdata->name;
+		if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) {
+			dev_err(dev, "Illegal display data format %d\n",
 				mx3fb_pdata->disp_data_fmt);
-		return -EINVAL;
+			return -EINVAL;
+		}
 	}
 
 	ichan->client = mx3fb;
@@ -1386,12 +1458,36 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 		goto emode;
 	}
 
-	if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
-		mode = mx3fb_pdata->mode;
-		num_modes = mx3fb_pdata->num_modes;
+	mx3fbi = fbi->par;
+
+	if (np) {
+		ret = of_get_videomode(display_np, mx3fb->vm,
+				       OF_USE_NATIVE_MODE);
+		if (ret) {
+			dev_err(dev, "failed to get videomode from DT\n");
+			goto put_display_node;
+		}
+
+		ret = fb_videomode_from_videomode(mx3fb->vm, mx3fb->fb_vm);
+		if (ret < 0)
+			goto put_display_node;
+
+		if (mx3fb->vm->flags & DISPLAY_FLAGS_DE_HIGH)
+			mx3fbi->flags |= FB_SYNC_OE_ACT_HIGH;
+
+		if (mx3fb->vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+			mx3fbi->flags |= FB_SYNC_CLK_INVERT;
+
+		mode = mx3fb->fb_vm;
+		num_modes = 1;
 	} else {
-		mode = mx3fb_modedb;
-		num_modes = ARRAY_SIZE(mx3fb_modedb);
+		if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+			mode = mx3fb_pdata->mode;
+			num_modes = mx3fb_pdata->num_modes;
+		} else {
+			mode = mx3fb_modedb;
+			num_modes = ARRAY_SIZE(mx3fb_modedb);
+		}
 	}
 
 	if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
@@ -1415,13 +1511,13 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 	sdc_set_global_alpha(mx3fb, true, 0xFF);
 	sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
 
-	mx3fbi			= fbi->par;
 	mx3fbi->idmac_channel	= ichan;
 	mx3fbi->ipu_ch		= ichan->dma_chan.chan_id;
 	mx3fbi->mx3fb		= mx3fb;
 	mx3fbi->blank		= FB_BLANK_NORMAL;
 
-	mx3fb->disp_data_fmt	= mx3fb_pdata->disp_data_fmt;
+	if (!np)
+		mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt;
 
 	init_completion(&mx3fbi->flip_cmpl);
 	disable_irq(ichan->eof_irq);
@@ -1440,6 +1536,8 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 
 	return 0;
 
+put_display_node:
+	of_node_put(display_np);
 erfb:
 esetpar:
 emode:
@@ -1455,17 +1553,21 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
 	struct device *dev;
 	struct mx3fb_platform_data *mx3fb_pdata;
 
-	if (!imx_dma_is_ipu(chan))
-		return false;
-
 	if (!rq)
 		return false;
 
 	dev = rq->mx3fb->dev;
 	mx3fb_pdata = dev_get_platdata(dev);
 
-	return rq->id == chan->chan_id &&
-		mx3fb_pdata->dma_dev == chan->device->dev;
+	if (!imx_dma_is_ipu(chan) && mx3fb_pdata)
+		return false;
+
+	/* When using the devicetree, mx3fb_pdata is NULL */
+	if (mx3fb_pdata)
+		return rq->id == chan->chan_id &&
+			mx3fb_pdata->dma_dev == chan->device->dev;
+	else
+		return rq->id == chan->chan_id;
 }
 
 static void release_fbi(struct fb_info *fbi)
@@ -1487,6 +1589,9 @@ static int mx3fb_probe(struct platform_device *pdev)
 	dma_cap_mask_t mask;
 	struct dma_chan *chan;
 	struct dma_chan_request rq;
+	struct device_node *np = dev->of_node;
+	struct videomode *vm;
+	struct fb_videomode *fb_vm;
 
 	/*
 	 * Display Interface (DI) and Synchronous Display Controller (SDC)
@@ -1508,7 +1613,33 @@ static int mx3fb_probe(struct platform_device *pdev)
 		goto eremap;
 	}
 
-	pr_debug("Remapped %pR at %p\n", sdc_reg, mx3fb->reg_base);
+	/* The full IPU registers range is passed by the device tree,
+	 * whereas the platform data only passes the SDC registers range.
+	 */
+	if (np) {
+		vm = devm_kzalloc(&pdev->dev, sizeof(struct videomode),
+				  GFP_KERNEL);
+		if (!vm) {
+			ret = -ENOMEM;
+			goto eremap;
+		}
+
+		fb_vm = devm_kzalloc(&pdev->dev, sizeof(struct fb_videomode),
+				     GFP_KERNEL);
+		if (!fb_vm) {
+			ret = -ENOMEM;
+			goto eremap;
+		}
+
+		mx3fb->vm = vm;
+		mx3fb->fb_vm = fb_vm;
+
+		mx3fb->reg_base += MX3FB_REG_OFFSET;
+		pr_debug("Remapped %pR at %p\n", sdc_reg + MX3FB_REG_OFFSET,
+			 mx3fb->reg_base);
+	} else {
+		pr_debug("Remapped %pR at %p\n", sdc_reg, mx3fb->reg_base);
+	}
 
 	/* IDMAC interface */
 	dmaengine_get();
@@ -1563,9 +1694,17 @@ static int mx3fb_remove(struct platform_device *dev)
 	return 0;
 }
 
+static struct of_device_id mx3fb_of_dev_id[] = {
+	{ .compatible = "fsl,imx31-ipu", },
+	{ .compatible = "fsl,imx35-ipu", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mx3fb_of_dev_id);
+
 static struct platform_driver mx3fb_driver = {
 	.driver = {
 		.name = MX3FB_NAME,
+		.of_match_table = mx3fb_of_dev_id,
 		.owner = THIS_MODULE,
 	},
 	.probe = mx3fb_probe,
-- 
1.7.9.5

[PATCHv6][ 3/5] video: mx3fb: Introduce regulator support.

[Denis Carikli]

This commit is based on the following commit by Fabio Estevam:
  4344429 video: mxsfb: Introduce regulator support

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Bénard <eric@eukrea.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
- Shrinked the Cc list.
- still permit non-dt boards to use that driver without a regulator.

ChangeLog v4->v5:
- Added Shawn Guo in the Cc list.
- Rebased to make it apply.

ChangeLog v3->v4:
- Some code style fixes.
- Improved error handling in eremap.

ChangeLog v2->v3:
- The prints are now replaced with non line wrapped prints.
- The regulator retrival has been adapted to the new DT bindings which looks
  more like the IPUv3 ones.
- The regulator_is_enabled checks were kept, because regulator_disable do not
  do such check.
---
 drivers/video/mx3fb.c |   56 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 952d2b5..40b47dd 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/dma/ipu-dma.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/platform_data/dma-imx.h>
 #include <linux/platform_data/video-mx3fb.h>
@@ -273,6 +274,7 @@ struct mx3fb_info {
 	struct dma_async_tx_descriptor	*txd;
 	dma_cookie_t			cookie;
 	struct scatterlist		sg[2];
+	struct regulator		*reg_lcd;
 
 	struct fb_var_screeninfo	cur_var; /* current var info */
 	uint32_t			flags;
@@ -1042,6 +1044,12 @@ static void __blank(int blank, struct fb_info *fbi)
 	case FB_BLANK_HSYNC_SUSPEND:
 	case FB_BLANK_NORMAL:
 		sdc_set_brightness(mx3fb, 0);
+		if (!IS_ERR(mx3_fbi->reg_lcd)) {
+			if (regulator_disable(mx3_fbi->reg_lcd)) {
+				dev_err(fbi->device,
+					"Failed to disable regulator.\n");
+			}
+		}
 		memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
 		/* Give LCD time to update - enough for 50 and 60 Hz */
 		msleep(25);
@@ -1049,6 +1057,12 @@ static void __blank(int blank, struct fb_info *fbi)
 		break;
 	case FB_BLANK_UNBLANK:
 		sdc_enable_channel(mx3_fbi);
+		if (!IS_ERR(mx3_fbi->reg_lcd)) {
+			if (regulator_enable(mx3_fbi->reg_lcd)) {
+				dev_err(fbi->device,
+					"Failed to enable regulator.\n");
+			}
+		}
 		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
 		break;
 	}
@@ -1233,7 +1247,12 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
 	if (mx3_fbi->blank = FB_BLANK_UNBLANK) {
 		sdc_disable_channel(mx3_fbi);
 		sdc_set_brightness(mx3fb, 0);
-
+		if (!IS_ERR(mx3_fbi->reg_lcd)) {
+			if (regulator_disable(mx3_fbi->reg_lcd)) {
+				dev_err(&pdev->dev,
+					"Failed to disable regulator.\n");
+			}
+		}
 	}
 	return 0;
 }
@@ -1249,6 +1268,12 @@ static int mx3fb_resume(struct platform_device *pdev)
 	if (mx3_fbi->blank = FB_BLANK_UNBLANK) {
 		sdc_enable_channel(mx3_fbi);
 		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+		if (!IS_ERR(mx3_fbi->reg_lcd)) {
+			if (regulator_enable(mx3_fbi->reg_lcd)) {
+				dev_err(&pdev->dev,
+					"Failed to enable regulator.\n");
+			}
+		}
 	}
 
 	console_lock();
@@ -1394,6 +1419,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 	struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
 	struct device_node *np = dev->of_node;
 	const char *name;
+	const char *regulator_name;
 	const char *ipu_disp_format;
 	unsigned int irq;
 	struct fb_info *fbi;
@@ -1409,6 +1435,9 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 			return -EINVAL;
 		}
 
+		of_property_read_string(display_np, "regulator-name",
+					&regulator_name);
+
 		of_property_read_string(display_np, "interface-pix-fmt",
 					&ipu_disp_format);
 		if (!ipu_disp_format) {
@@ -1526,6 +1555,21 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 	if (ret < 0)
 		goto esetpar;
 
+	/* In dt mode,
+	 * using devm_regulator_get would require that the proprety referencing
+	 * the regulator phandle has to be inside the mx3fb node.
+	 */
+	if (np) {
+		if (regulator_name)
+			mx3fbi->reg_lcd = regulator_get(NULL, regulator_name);
+
+		if (IS_ERR(mx3fbi->reg_lcd))
+			return PTR_ERR(mx3fbi->reg_lcd);
+	} else {
+		/* Permit that driver without a regulator in non-dt mode */
+		mx3fbi->reg_lcd = regulator_get(dev, "lcd");
+	}
+
 	__blank(FB_BLANK_UNBLANK, fbi);
 
 	dev_info(dev, "registered, using mode %s\n", fb_mode);
@@ -1589,6 +1633,7 @@ static int mx3fb_probe(struct platform_device *pdev)
 	dma_cap_mask_t mask;
 	struct dma_chan *chan;
 	struct dma_chan_request rq;
+	struct mx3fb_info *mx3_fbi;
 	struct device_node *np = dev->of_node;
 	struct videomode *vm;
 	struct fb_videomode *fb_vm;
@@ -1673,6 +1718,12 @@ ersdc0:
 	dmaengine_put();
 	iounmap(mx3fb->reg_base);
 eremap:
+	if (mx3fb->fbi) {
+		mx3_fbi = mx3fb->fbi->par;
+
+		if ((!IS_ERR(mx3_fbi->reg_lcd)) && mx3_fbi->reg_lcd)
+			regulator_put(mx3_fbi->reg_lcd);
+	}
 	dev_err(dev, "mx3fb: failed to register fb\n");
 	return ret;
 }
@@ -1684,6 +1735,9 @@ static int mx3fb_remove(struct platform_device *dev)
 	struct mx3fb_info *mx3_fbi = fbi->par;
 	struct dma_chan *chan;
 
+	if ((!IS_ERR(mx3_fbi->reg_lcd)) && mx3_fbi->reg_lcd)
+		regulator_put(mx3_fbi->reg_lcd);
+
 	chan = &mx3_fbi->idmac_channel->dma_chan;
 	release_fbi(fbi);
 
-- 
1.7.9.5

[PATCHv6][ 3/5] video: mx3fb: Introduce regulator support.

[Denis Carikli]

This commit is based on the following commit by Fabio Estevam:
  4344429 video: mxsfb: Introduce regulator support

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric B?nard <eric@eukrea.com>
Cc: linux-fbdev at vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
- Shrinked the Cc list.
- still permit non-dt boards to use that driver without a regulator.

ChangeLog v4->v5:
- Added Shawn Guo in the Cc list.
- Rebased to make it apply.

ChangeLog v3->v4:
- Some code style fixes.
- Improved error handling in eremap.

ChangeLog v2->v3:
- The prints are now replaced with non line wrapped prints.
- The regulator retrival has been adapted to the new DT bindings which looks
  more like the IPUv3 ones.
- The regulator_is_enabled checks were kept, because regulator_disable do not
  do such check.
---
 drivers/video/mx3fb.c |   56 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 55 insertions(+), 1 deletion(-)

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 952d2b5..40b47dd 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/dma/ipu-dma.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/platform_data/dma-imx.h>
 #include <linux/platform_data/video-mx3fb.h>
@@ -273,6 +274,7 @@ struct mx3fb_info {
 	struct dma_async_tx_descriptor	*txd;
 	dma_cookie_t			cookie;
 	struct scatterlist		sg[2];
+	struct regulator		*reg_lcd;
 
 	struct fb_var_screeninfo	cur_var; /* current var info */
 	uint32_t			flags;
@@ -1042,6 +1044,12 @@ static void __blank(int blank, struct fb_info *fbi)
 	case FB_BLANK_HSYNC_SUSPEND:
 	case FB_BLANK_NORMAL:
 		sdc_set_brightness(mx3fb, 0);
+		if (!IS_ERR(mx3_fbi->reg_lcd)) {
+			if (regulator_disable(mx3_fbi->reg_lcd)) {
+				dev_err(fbi->device,
+					"Failed to disable regulator.\n");
+			}
+		}
 		memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
 		/* Give LCD time to update - enough for 50 and 60 Hz */
 		msleep(25);
@@ -1049,6 +1057,12 @@ static void __blank(int blank, struct fb_info *fbi)
 		break;
 	case FB_BLANK_UNBLANK:
 		sdc_enable_channel(mx3_fbi);
+		if (!IS_ERR(mx3_fbi->reg_lcd)) {
+			if (regulator_enable(mx3_fbi->reg_lcd)) {
+				dev_err(fbi->device,
+					"Failed to enable regulator.\n");
+			}
+		}
 		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
 		break;
 	}
@@ -1233,7 +1247,12 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
 	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
 		sdc_disable_channel(mx3_fbi);
 		sdc_set_brightness(mx3fb, 0);
-
+		if (!IS_ERR(mx3_fbi->reg_lcd)) {
+			if (regulator_disable(mx3_fbi->reg_lcd)) {
+				dev_err(&pdev->dev,
+					"Failed to disable regulator.\n");
+			}
+		}
 	}
 	return 0;
 }
@@ -1249,6 +1268,12 @@ static int mx3fb_resume(struct platform_device *pdev)
 	if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
 		sdc_enable_channel(mx3_fbi);
 		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+		if (!IS_ERR(mx3_fbi->reg_lcd)) {
+			if (regulator_enable(mx3_fbi->reg_lcd)) {
+				dev_err(&pdev->dev,
+					"Failed to enable regulator.\n");
+			}
+		}
 	}
 
 	console_lock();
@@ -1394,6 +1419,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 	struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
 	struct device_node *np = dev->of_node;
 	const char *name;
+	const char *regulator_name;
 	const char *ipu_disp_format;
 	unsigned int irq;
 	struct fb_info *fbi;
@@ -1409,6 +1435,9 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 			return -EINVAL;
 		}
 
+		of_property_read_string(display_np, "regulator-name",
+					&regulator_name);
+
 		of_property_read_string(display_np, "interface-pix-fmt",
 					&ipu_disp_format);
 		if (!ipu_disp_format) {
@@ -1526,6 +1555,21 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 	if (ret < 0)
 		goto esetpar;
 
+	/* In dt mode,
+	 * using devm_regulator_get would require that the proprety referencing
+	 * the regulator phandle has to be inside the mx3fb node.
+	 */
+	if (np) {
+		if (regulator_name)
+			mx3fbi->reg_lcd = regulator_get(NULL, regulator_name);
+
+		if (IS_ERR(mx3fbi->reg_lcd))
+			return PTR_ERR(mx3fbi->reg_lcd);
+	} else {
+		/* Permit that driver without a regulator in non-dt mode */
+		mx3fbi->reg_lcd = regulator_get(dev, "lcd");
+	}
+
 	__blank(FB_BLANK_UNBLANK, fbi);
 
 	dev_info(dev, "registered, using mode %s\n", fb_mode);
@@ -1589,6 +1633,7 @@ static int mx3fb_probe(struct platform_device *pdev)
 	dma_cap_mask_t mask;
 	struct dma_chan *chan;
 	struct dma_chan_request rq;
+	struct mx3fb_info *mx3_fbi;
 	struct device_node *np = dev->of_node;
 	struct videomode *vm;
 	struct fb_videomode *fb_vm;
@@ -1673,6 +1718,12 @@ ersdc0:
 	dmaengine_put();
 	iounmap(mx3fb->reg_base);
 eremap:
+	if (mx3fb->fbi) {
+		mx3_fbi = mx3fb->fbi->par;
+
+		if ((!IS_ERR(mx3_fbi->reg_lcd)) && mx3_fbi->reg_lcd)
+			regulator_put(mx3_fbi->reg_lcd);
+	}
 	dev_err(dev, "mx3fb: failed to register fb\n");
 	return ret;
 }
@@ -1684,6 +1735,9 @@ static int mx3fb_remove(struct platform_device *dev)
 	struct mx3fb_info *mx3_fbi = fbi->par;
 	struct dma_chan *chan;
 
+	if ((!IS_ERR(mx3_fbi->reg_lcd)) && mx3_fbi->reg_lcd)
+		regulator_put(mx3_fbi->reg_lcd);
+
 	chan = &mx3_fbi->idmac_channel->dma_chan;
 	release_fbi(fbi);
 
-- 
1.7.9.5

Re: [PATCHv6][ 3/5] video: mx3fb: Introduce r =?UTF-8?B?ZWd1bGF0b3Igc3Vwc

[Alexander Shiyan]
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Re: [PATCHv6][ 3/5] video: mx3fb: Introduce regulator support.

[Alexander Shiyan]

?????, 26 ??????? 2014, 10:59 +01:00 ?? Denis Carikli <denis@eukrea.com>:
> This commit is based on the following commit by Fabio Estevam:
>   4344429 video: mxsfb: Introduce regulator support
...
> +++ b/drivers/video/mx3fb.c
...
> @@ -1409,6 +1435,9 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
>  			return -EINVAL;
>  		}
>  
> +		of_property_read_string(display_np, "regulator-name",
> +					&regulator_name);
> +
>  		of_property_read_string(display_np, "interface-pix-fmt",
>  					&ipu_disp_format);
>  		if (!ipu_disp_format) {
> @@ -1526,6 +1555,21 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
>  	if (ret < 0)
>  		goto esetpar;
>  
> +	/* In dt mode,
> +	 * using devm_regulator_get would require that the proprety referencing
> +	 * the regulator phandle has to be inside the mx3fb node.

What???

> +	 */
> +	if (np) {
> +		if (regulator_name)
> +			mx3fbi->reg_lcd = regulator_get(NULL, regulator_name);
> +
> +		if (IS_ERR(mx3fbi->reg_lcd))
> +			return PTR_ERR(mx3fbi->reg_lcd);
> +	} else {
> +		/* Permit that driver without a regulator in non-dt mode */
> +		mx3fbi->reg_lcd = regulator_get(dev, "lcd");
> +	}

Why you want to use an excess "regulator-name" property?
Just use devm_regulator_get(dev, "lcd") for both dt/non-dt case.

Re: [PATCHv6][ 3/5] video: mx3fb: Introduce regulator support.

[Denis Carikli]

On 02/26/2014 11:20 AM, Alexander Shiyan wrote:

 > Why you want to use an excess "regulator-name" property?
I'll fix that.

>> +	/* In dt mode,
>> +	 * using devm_regulator_get would require that the proprety referencing
>> +	 * the regulator phandle has to be inside the mx3fb node.
>
> What???
[...]
 > Just use devm_regulator_get(dev, "lcd") for both dt/non-dt case.

About the use of devm_regulator_get instead of regulator_get:

There is a "dma ipu driver" for the mx3* at drivers/dma/ipu/ipu_idmac.c
This framebuffer driver (mx3fb) uses that "dma ipu driver".

In non-dt mode("board files"), this framebuffer driver requires some 
platform data which has resource informations about the ipu.

So to get device tree bindings support for the mx3fb driver, at first I 
exported the "dma ipu driver" as DMA bindings, to be used in the dts, 
and then made the mx3fb driver use that.

The comment[1] to that patchset was to instead have similar bindings 
that looks like the IPUv3 ones(IPUv3 is a staging drm driver), and not 
to export the "dma ipu driver" bindings to the dts.

So I made the bindings look like that:

display0: display@di0 {
   [...]
   display-timings {
     [...]
   };
};

ipu: ipu@53fc0000 {
   compatible = "fsl,imx35-ipu";
   reg = <0x53fc0000 0x4000>;
   clocks = <&clks 55>;
   display = <&display0>;
};

So that is very similar to the imx-drm binding[2].

To achieve that, I've set the .compatible property of the mx3fb driver 
to "fsl,<chip>-ipu", so it would look like the IPUv3 bindings, and then 
I handled the "dma ipu driver" registration in a way that doesn't export 
it to the dts.

The difference is that the imx-drm driver has separate drivers for 
handling each display type(parallel display, tve, lvds and HDMI) while 
the mx3fb doesn't.

using devm_regulator_get(NULL, "lcd") would result in a crash, because 
of devres_add.

using devm_regulator_get(dev, "lcd") would be better but it would 
instead mean that the regulator handle will have to be a child of the 
mx3fb's ipu node (ipu@53fc0000).

That's because devm_regulator_get will end calling of_get_regulator 
(trough _regulator_get, and regulator_dev_lookup), which will in turn 
lookup that regulator in the childs of dev->of_node.

That's why I want to pass it a NULL instead of a device struct, and I 
can't do it in devm_regulator_get because of devres_add, so I ended up 
using regulator_get directly.

References.
-----------
[1]http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/205846.html
[2]Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt

Denis.

[PATCHv6][ 3/5] video: mx3fb: Introduce regulator support.

[Denis Carikli]

On 02/26/2014 11:20 AM, Alexander Shiyan wrote:

 > Why you want to use an excess "regulator-name" property?
I'll fix that.

>> +	/* In dt mode,
>> +	 * using devm_regulator_get would require that the proprety referencing
>> +	 * the regulator phandle has to be inside the mx3fb node.
>
> What???
[...]
 > Just use devm_regulator_get(dev, "lcd") for both dt/non-dt case.

About the use of devm_regulator_get instead of regulator_get:

There is a "dma ipu driver" for the mx3* at drivers/dma/ipu/ipu_idmac.c
This framebuffer driver (mx3fb) uses that "dma ipu driver".

In non-dt mode("board files"), this framebuffer driver requires some 
platform data which has resource informations about the ipu.

So to get device tree bindings support for the mx3fb driver, at first I 
exported the "dma ipu driver" as DMA bindings, to be used in the dts, 
and then made the mx3fb driver use that.

The comment[1] to that patchset was to instead have similar bindings 
that looks like the IPUv3 ones(IPUv3 is a staging drm driver), and not 
to export the "dma ipu driver" bindings to the dts.

So I made the bindings look like that:

display0: display at di0 {
   [...]
   display-timings {
     [...]
   };
};

ipu: ipu at 53fc0000 {
   compatible = "fsl,imx35-ipu";
   reg = <0x53fc0000 0x4000>;
   clocks = <&clks 55>;
   display = <&display0>;
};

So that is very similar to the imx-drm binding[2].

To achieve that, I've set the .compatible property of the mx3fb driver 
to "fsl,<chip>-ipu", so it would look like the IPUv3 bindings, and then 
I handled the "dma ipu driver" registration in a way that doesn't export 
it to the dts.

The difference is that the imx-drm driver has separate drivers for 
handling each display type(parallel display, tve, lvds and HDMI) while 
the mx3fb doesn't.

using devm_regulator_get(NULL, "lcd") would result in a crash, because 
of devres_add.

using devm_regulator_get(dev, "lcd") would be better but it would 
instead mean that the regulator handle will have to be a child of the 
mx3fb's ipu node (ipu at 53fc0000).

That's because devm_regulator_get will end calling of_get_regulator 
(trough _regulator_get, and regulator_dev_lookup), which will in turn 
lookup that regulator in the childs of dev->of_node.

That's why I want to pass it a NULL instead of a device struct, and I 
can't do it in devm_regulator_get because of devres_add, so I ended up 
using regulator_get directly.

References.
-----------
[1]http://lists.infradead.org/pipermail/linux-arm-kernel/2013-October/205846.html
[2]Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt

Denis.

[PATCHv6][ 4/5] ARM: dts: i.MX35: Add display support.

[Denis Carikli]

A pinctrl node for the IPU was also added.

Cc: Eric Bénard <eric@eukrea.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
- Shrinked the Cc list.

ChangeLog v4->v5:
- Added Grant Likely and Shawn Guo in the Cc list.
- Adapted to the new non-dma ipu bindings.
- Adapted to the use of imx35-pingrp.h
- The pinctrl ipu node addition was moved in this commit.

ChangeLog v3->v4:
- Splitted the imx35.dtsi display support (new patch).
---
 arch/arm/boot/dts/imx35.dtsi |    7 +++++++
 arch/arm/mach-imx/imx35-dt.c |    7 +++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 88b218f..e6ad2a4 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -229,6 +229,13 @@
 				status = "disabled";
 			};
 
+			ipu: ipu@53fc0000 {
+				compatible = "fsl,imx35-ipu";
+				reg = <0x53fc0000 0x4000>;
+				clocks = <&clks 55>;
+				status = "disabled";
+			};
+
 			audmux: audmux@53fc4000 {
 				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
 				reg = <0x53fc4000 0x4000>;
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
index 9d48e00..c2919a8 100644
--- a/arch/arm/mach-imx/imx35-dt.c
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -18,14 +18,21 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "common.h"
+#include "devices-imx35.h"
 #include "mx35.h"
 
 static void __init imx35_dt_init(void)
 {
+	struct device_node *np;
 	mxc_arch_reset_init_dt();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     NULL, NULL);
+
+	/* We don't want to export the IPU as DT bindings. */
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ipu");
+	if (of_device_is_available(np))
+		imx35_add_ipu_core();
 }
 
 static void __init imx35_irq_init(void)
-- 
1.7.9.5

[PATCHv6][ 4/5] ARM: dts: i.MX35: Add display support.

[Denis Carikli]

A pinctrl node for the IPU was also added.

Cc: Eric B?nard <eric@eukrea.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
- Shrinked the Cc list.

ChangeLog v4->v5:
- Added Grant Likely and Shawn Guo in the Cc list.
- Adapted to the new non-dma ipu bindings.
- Adapted to the use of imx35-pingrp.h
- The pinctrl ipu node addition was moved in this commit.

ChangeLog v3->v4:
- Splitted the imx35.dtsi display support (new patch).
---
 arch/arm/boot/dts/imx35.dtsi |    7 +++++++
 arch/arm/mach-imx/imx35-dt.c |    7 +++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 88b218f..e6ad2a4 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -229,6 +229,13 @@
 				status = "disabled";
 			};
 
+			ipu: ipu at 53fc0000 {
+				compatible = "fsl,imx35-ipu";
+				reg = <0x53fc0000 0x4000>;
+				clocks = <&clks 55>;
+				status = "disabled";
+			};
+
 			audmux: audmux at 53fc4000 {
 				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
 				reg = <0x53fc4000 0x4000>;
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
index 9d48e00..c2919a8 100644
--- a/arch/arm/mach-imx/imx35-dt.c
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -18,14 +18,21 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "common.h"
+#include "devices-imx35.h"
 #include "mx35.h"
 
 static void __init imx35_dt_init(void)
 {
+	struct device_node *np;
 	mxc_arch_reset_init_dt();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     NULL, NULL);
+
+	/* We don't want to export the IPU as DT bindings. */
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-ipu");
+	if (of_device_is_available(np))
+		imx35_add_ipu_core();
 }
 
 static void __init imx35_irq_init(void)
-- 
1.7.9.5

[PATCHv6][ 5/5] ARM: dts: mbimxsd35 Add video and displays support.

[Denis Carikli]

Cc: Eric Bénard <eric@eukrea.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org

Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
- Shrinked the Cc list.
- Added the targets in the Makefile
- rebased not to use the now gone pingrp headers.

ChangeLog v4->v5:
- Added Grant Likely and Shawn Guo in the Cc list.
- Adapted to the new non-dma ipu bindings.

ChangeLog v3->v4:
- Shortened the licenses.
- adapted the dts(i) to the new bindings.
ChangeLog v2->v3:
- The dts were adapted to the new DT bindings which looks more like the IPUv3
  ones.
---
 arch/arm/boot/dts/Makefile                         |    3 +
 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi       |   28 ++++++++++
 .../imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts  |   58 ++++++++++++++++++++
 .../imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts  |   47 ++++++++++++++++
 .../imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts   |   47 ++++++++++++++++
 5 files changed, 183 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c98f343..ad0915e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -167,6 +167,9 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx27-phytec-phycard-s-rdk.dtb \
 	imx31-bug.dtb \
 	imx35-eukrea-mbimxsd35-baseboard.dtb \
+	imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dtb \
+	imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dtb \
+	imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dtb \
 	imx50-evk.dtb \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
index 906ae93..6596009 100644
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -70,6 +70,34 @@
 				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
 			>;
 		};
+
+		pinctrl_ipu_disp0: ipudisp0grp {
+			fsl,pins = <
+				MX35_PAD_LD0__IPU_DISPB_DAT_0         0x80000000
+				MX35_PAD_LD1__IPU_DISPB_DAT_1         0x80000000
+				MX35_PAD_LD2__IPU_DISPB_DAT_2         0x80000000
+				MX35_PAD_LD3__IPU_DISPB_DAT_3         0x80000000
+				MX35_PAD_LD4__IPU_DISPB_DAT_4         0x80000000
+				MX35_PAD_LD5__IPU_DISPB_DAT_5         0x80000000
+				MX35_PAD_LD6__IPU_DISPB_DAT_6         0x80000000
+				MX35_PAD_LD7__IPU_DISPB_DAT_7         0x80000000
+				MX35_PAD_LD8__IPU_DISPB_DAT_8         0x80000000
+				MX35_PAD_LD9__IPU_DISPB_DAT_9         0x80000000
+				MX35_PAD_LD10__IPU_DISPB_DAT_10       0x80000000
+				MX35_PAD_LD11__IPU_DISPB_DAT_11       0x80000000
+				MX35_PAD_LD12__IPU_DISPB_DAT_12       0x80000000
+				MX35_PAD_LD13__IPU_DISPB_DAT_13       0x80000000
+				MX35_PAD_LD14__IPU_DISPB_DAT_14       0x80000000
+				MX35_PAD_LD15__IPU_DISPB_DAT_15       0x80000000
+				MX35_PAD_LD16__IPU_DISPB_DAT_16       0x80000000
+				MX35_PAD_LD17__IPU_DISPB_DAT_17       0x80000000
+				MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC 0x80000000
+				MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK 0x80000000
+				MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY   0x80000000
+				MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC 0x80000000
+				MX35_PAD_CONTRAST__IPU_DISPB_CONTR    0x80000000
+			>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
new file mode 100644
index 0000000..345f560
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD35 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd35-baseboard-cmo-qvga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	cmo_qvga: display@di0 {
+		compatible = "fsl,mx3-parallel-display";
+		regulator-name = "lcd";
+		interface-pix-fmt = "rgb666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+		lcd-supply = <&reg_lcd_3v3>;
+		model = "CMO-QVGA";
+		display-timings {
+			qvga_timings: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <68>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vfront-porch = <4>;
+				hsync-len = <30>;
+				vsync-len = <3>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: lcd-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 0>;
+		enable-active-high;
+	};
+};
+
+&ipu {
+	display = <&cmo_qvga>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
new file mode 100644
index 0000000..1a249d0
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD35 with the DVI-SVGA Display";
+	compatible = "eukrea,mbimxsd35-baseboard-dvi-svga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+	dvi_svga: display@di0 {
+		interface-pix-fmt = "rgb666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+		model = "DVI-SVGA";
+		display-timings {
+			svga_timings: 800x600 {
+				clock-frequency = <40000000>;
+				hactive = <800>;
+				vactive = <600>;
+				hback-porch = <75>;
+				hfront-porch = <75>;
+				vback-porch = <7>;
+				vfront-porch = <75>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ipu {
+	display = <&dvi_svga>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
new file mode 100644
index 0000000..44a7616
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD35 with the DVI-VGA Display";
+	compatible = "eukrea,mbimxsd35-baseboard-dvi-vga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+	dvi_vga: display@di0 {
+		interface-pix-fmt = "rgb666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+		model = "DVI-VGA";
+		display-timings {
+			vga_timings: 640x480 {
+				clock-frequency = <31250000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <100>;
+				hfront-porch = <100>;
+				vback-porch = <7>;
+				vfront-porch = <100>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ipu {
+	display = <&dvi_vga>;
+	status = "okay";
+};
-- 
1.7.9.5

[PATCHv6][ 5/5] ARM: dts: mbimxsd35 Add video and displays support.

[Denis Carikli]

Cc: Eric B?nard <eric@eukrea.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: linux-arm-kernel at lists.infradead.org

Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
- Shrinked the Cc list.
- Added the targets in the Makefile
- rebased not to use the now gone pingrp headers.

ChangeLog v4->v5:
- Added Grant Likely and Shawn Guo in the Cc list.
- Adapted to the new non-dma ipu bindings.

ChangeLog v3->v4:
- Shortened the licenses.
- adapted the dts(i) to the new bindings.
ChangeLog v2->v3:
- The dts were adapted to the new DT bindings which looks more like the IPUv3
  ones.
---
 arch/arm/boot/dts/Makefile                         |    3 +
 arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi       |   28 ++++++++++
 .../imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts  |   58 ++++++++++++++++++++
 .../imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts  |   47 ++++++++++++++++
 .../imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts   |   47 ++++++++++++++++
 5 files changed, 183 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
 create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c98f343..ad0915e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -167,6 +167,9 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx27-phytec-phycard-s-rdk.dtb \
 	imx31-bug.dtb \
 	imx35-eukrea-mbimxsd35-baseboard.dtb \
+	imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dtb \
+	imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dtb \
+	imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dtb \
 	imx50-evk.dtb \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
index 906ae93..6596009 100644
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -70,6 +70,34 @@
 				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
 			>;
 		};
+
+		pinctrl_ipu_disp0: ipudisp0grp {
+			fsl,pins = <
+				MX35_PAD_LD0__IPU_DISPB_DAT_0         0x80000000
+				MX35_PAD_LD1__IPU_DISPB_DAT_1         0x80000000
+				MX35_PAD_LD2__IPU_DISPB_DAT_2         0x80000000
+				MX35_PAD_LD3__IPU_DISPB_DAT_3         0x80000000
+				MX35_PAD_LD4__IPU_DISPB_DAT_4         0x80000000
+				MX35_PAD_LD5__IPU_DISPB_DAT_5         0x80000000
+				MX35_PAD_LD6__IPU_DISPB_DAT_6         0x80000000
+				MX35_PAD_LD7__IPU_DISPB_DAT_7         0x80000000
+				MX35_PAD_LD8__IPU_DISPB_DAT_8         0x80000000
+				MX35_PAD_LD9__IPU_DISPB_DAT_9         0x80000000
+				MX35_PAD_LD10__IPU_DISPB_DAT_10       0x80000000
+				MX35_PAD_LD11__IPU_DISPB_DAT_11       0x80000000
+				MX35_PAD_LD12__IPU_DISPB_DAT_12       0x80000000
+				MX35_PAD_LD13__IPU_DISPB_DAT_13       0x80000000
+				MX35_PAD_LD14__IPU_DISPB_DAT_14       0x80000000
+				MX35_PAD_LD15__IPU_DISPB_DAT_15       0x80000000
+				MX35_PAD_LD16__IPU_DISPB_DAT_16       0x80000000
+				MX35_PAD_LD17__IPU_DISPB_DAT_17       0x80000000
+				MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC 0x80000000
+				MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK 0x80000000
+				MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY   0x80000000
+				MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC 0x80000000
+				MX35_PAD_CONTRAST__IPU_DISPB_CONTR    0x80000000
+			>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
new file mode 100644
index 0000000..345f560
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD35 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd35-baseboard-cmo-qvga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	cmo_qvga: display at di0 {
+		compatible = "fsl,mx3-parallel-display";
+		regulator-name = "lcd";
+		interface-pix-fmt = "rgb666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+		lcd-supply = <&reg_lcd_3v3>;
+		model = "CMO-QVGA";
+		display-timings {
+			qvga_timings: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <68>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vfront-porch = <4>;
+				hsync-len = <30>;
+				vsync-len = <3>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: lcd-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 0>;
+		enable-active-high;
+	};
+};
+
+&ipu {
+	display = <&cmo_qvga>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
new file mode 100644
index 0000000..1a249d0
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD35 with the DVI-SVGA Display";
+	compatible = "eukrea,mbimxsd35-baseboard-dvi-svga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+	dvi_svga: display at di0 {
+		interface-pix-fmt = "rgb666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+		model = "DVI-SVGA";
+		display-timings {
+			svga_timings: 800x600 {
+				clock-frequency = <40000000>;
+				hactive = <800>;
+				vactive = <600>;
+				hback-porch = <75>;
+				hfront-porch = <75>;
+				vback-porch = <7>;
+				vfront-porch = <75>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ipu {
+	display = <&dvi_svga>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
new file mode 100644
index 0000000..44a7616
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD35 with the DVI-VGA Display";
+	compatible = "eukrea,mbimxsd35-baseboard-dvi-vga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+	dvi_vga: display at di0 {
+		interface-pix-fmt = "rgb666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+		model = "DVI-VGA";
+		display-timings {
+			vga_timings: 640x480 {
+				clock-frequency = <31250000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <100>;
+				hfront-porch = <100>;
+				vback-porch = <7>;
+				vfront-porch = <100>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&ipu {
+	display = <&dvi_vga>;
+	status = "okay";
+};
-- 
1.7.9.5