* [B.A.T.M.A.N.] [PATCH 2/3] batctl: add switch for setting multicast_mode
2014-02-24 4:11 [B.A.T.M.A.N.] [PATCH 1/3] batctl: fix wrong header lines number for local translation table Linus Lüssing
@ 2014-02-24 4:11 ` Linus Lüssing
2014-02-24 4:11 ` [B.A.T.M.A.N.] [PATCH 3/3] batctl: add unicast/multicast address filter option for TT output Linus Lüssing
2014-02-27 10:28 ` [B.A.T.M.A.N.] [PATCH 1/3] batctl: fix wrong header lines number for local translation table Antonio Quartulli
2 siblings, 0 replies; 5+ messages in thread
From: Linus Lüssing @ 2014-02-24 4:11 UTC (permalink / raw)
To: b.a.t.m.a.n
This patch adds a switch for the new multicast_mode setting in
batman-adv.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
---
README | 7 +++++++
man/batctl.8 | 4 ++++
sys.c | 6 ++++++
sys.h | 1 +
4 files changed, 18 insertions(+)
diff --git a/README b/README
index 5af95c8..69c7a07 100644
--- a/README
+++ b/README
@@ -392,6 +392,13 @@ Usage: batctl network_coding|nc [0|1]
Note that network coding requires a working promiscuous mode on all interfaces.
+batctl multicast_mode
+=====================
+
+display or modify the multicast mode setting
+
+Usage: batctl multicast_mode|mm [0|1]
+
batctl aggregation
==================
diff --git a/man/batctl.8 b/man/batctl.8
index 2fe5941..a8e8868 100644
--- a/man/batctl.8
+++ b/man/batctl.8
@@ -88,6 +88,10 @@ disable fragmentation.
If no parameter is given the current network coding mode setting is displayed. Otherwise the parameter is used to enable or
disable network coding.
.br
+.IP "\fBmulticast_mode\fP|\fBmm\fP [\fB0\fP|\fB1\fP]"
+If no parameter is given the current multicast mode setting is displayed. Otherwise the parameter is used to enable or
+disable multicast optimizations (i.e. disabling means always sending own multicast frames via classic flooding).
+.br
.IP "\fBloglevel\fP|\fBll\fP [\fBlevel\fP[ \fBlevel\fP[ \fBlevel\fP]] \fB...\fP]"
If no parameter is given the current log level settings are displayed otherwise the parameter(s) is/are used to set the log
level. Level 'none' disables all verbose logging. Level 'batman' enables messages related to routing / flooding / broadcasting.
diff --git a/sys.c b/sys.c
index 5cebf52..45fb656 100644
--- a/sys.c
+++ b/sys.c
@@ -96,6 +96,12 @@ const struct settings_data batctl_settings[BATCTL_SETTINGS_NUM] = {
.opt_short = "nc",
.sysfs_name = "network_coding",
.params = sysfs_param_enable,
+ },
+ {
+ .opt_long = "multicast_mode",
+ .opt_short = "mm",
+ .sysfs_name = "multicast_mode",
+ .params = sysfs_param_enable,
}
};
diff --git a/sys.h b/sys.h
index 2cbbcfb..9016501 100644
--- a/sys.h
+++ b/sys.h
@@ -46,6 +46,7 @@ enum batctl_settings_list {
BATCTL_SETTINGS_BONDING,
BATCTL_SETTINGS_FRAGMENTATION,
BATCTL_SETTINGS_NETWORK_CODING,
+ BATCTL_SETTINGS_MULTICAST_MODE,
BATCTL_SETTINGS_NUM,
};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [B.A.T.M.A.N.] [PATCH 3/3] batctl: add unicast/multicast address filter option for TT output
2014-02-24 4:11 [B.A.T.M.A.N.] [PATCH 1/3] batctl: fix wrong header lines number for local translation table Linus Lüssing
2014-02-24 4:11 ` [B.A.T.M.A.N.] [PATCH 2/3] batctl: add switch for setting multicast_mode Linus Lüssing
@ 2014-02-24 4:11 ` Linus Lüssing
2014-02-27 12:24 ` Antonio Quartulli
2014-02-27 10:28 ` [B.A.T.M.A.N.] [PATCH 1/3] batctl: fix wrong header lines number for local translation table Antonio Quartulli
2 siblings, 1 reply; 5+ messages in thread
From: Linus Lüssing @ 2014-02-24 4:11 UTC (permalink / raw)
To: b.a.t.m.a.n
This patch adds the new "-u" and "-m" options for the local and global
translation table output to only display announced unicast or multicast
mac addresses to enhance readability.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
---
debug.c | 27 ++++++++++++++++++++++++++-
functions.c | 16 ++++++++++++++++
functions.h | 2 ++
man/batctl.8 | 2 ++
4 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/debug.c b/debug.c
index 6836857..b8f9a07 100644
--- a/debug.c
+++ b/debug.c
@@ -91,6 +91,11 @@ static void debug_table_usage(int debug_table)
if (debug_table == BATCTL_TABLE_ORIGINATORS)
fprintf(stderr, " \t -t timeout interval - don't print originators not seen for x.y seconds \n");
+ if (debug_table == BATCTL_TABLE_TRANSLOCAL ||
+ debug_table == BATCTL_TABLE_TRANSGLOBAL) {
+ fprintf(stderr, " \t -u print unicast mac addresses only\n");
+ fprintf(stderr, " \t -m print multicast mac addresses only\n");
+ }
}
int handle_debug_table(char *mesh_iface, int debug_table, int argc, char **argv)
@@ -102,7 +107,7 @@ int handle_debug_table(char *mesh_iface, int debug_table, int argc, char **argv)
float watch_interval = 1;
opterr = 0;
- while ((optchar = getopt(argc, argv, "hnw:t:H")) != -1) {
+ while ((optchar = getopt(argc, argv, "hnw:t:Hum")) != -1) {
switch (optchar) {
case 'h':
debug_table_usage(debug_table);
@@ -138,6 +143,26 @@ int handle_debug_table(char *mesh_iface, int debug_table, int argc, char **argv)
case 'H':
read_opt |= SKIP_HEADER;
break;
+ case 'u':
+ if (debug_table != BATCTL_TABLE_TRANSLOCAL &&
+ debug_table != BATCTL_TABLE_TRANSGLOBAL) {
+ fprintf(stderr, "Error - unrecognised option '-%c'\n", optchar);
+ debug_table_usage(debug_table);
+ return EXIT_FAILURE;
+ }
+
+ read_opt |= UNICAST_ONLY;
+ break;
+ case 'm':
+ if (debug_table != BATCTL_TABLE_TRANSLOCAL &&
+ debug_table != BATCTL_TABLE_TRANSGLOBAL) {
+ fprintf(stderr, "Error - unrecognised option '-%c'\n", optchar);
+ debug_table_usage(debug_table);
+ return EXIT_FAILURE;
+ }
+
+ read_opt |= MULTICAST_ONLY;
+ break;
case '?':
if (optopt == 't')
fprintf(stderr, "Error - option '-t' needs a number as argument\n");
diff --git a/functions.c b/functions.c
index 36804bd..41eabb2 100644
--- a/functions.c
+++ b/functions.c
@@ -224,6 +224,22 @@ read:
&& (last_seen > orig_timeout))
continue;
+ /* translation table: skip multicast */
+ if (line > header_lines &&
+ read_opt & UNICAST_ONLY &&
+ strlen(line_ptr) > strlen(" * xx:xx:xx:") &&
+ (!strncmp(line_ptr+3, "33:33:", strlen("33:33:")) ||
+ !strncmp(line_ptr+3, "01:00:5e:", strlen("01:00:5e:"))))
+ continue;
+
+ /* translation table: skip unicast */
+ if (line > header_lines &&
+ read_opt & MULTICAST_ONLY &&
+ strlen(line_ptr) > strlen(" * xx:xx:xx:") &&
+ strncmp(line_ptr+3, "33:33:", strlen("33:33:")) &&
+ strncmp(line_ptr+3, "01:00:5e:", strlen("01:00:5e:")))
+ continue;
+
if (!(read_opt & USE_BAT_HOSTS)) {
printf("%s", line_ptr);
continue;
diff --git a/functions.h b/functions.h
index 14ba525..43c3d9c 100644
--- a/functions.h
+++ b/functions.h
@@ -57,6 +57,8 @@ enum {
NO_OLD_ORIGS = 0x40,
COMPAT_FILTER = 0x80,
SKIP_HEADER = 0x100,
+ UNICAST_ONLY = 0x200,
+ MULTICAST_ONLY = 0x400,
};
#endif
diff --git a/man/batctl.8 b/man/batctl.8
index a8e8868..6b43d5e 100644
--- a/man/batctl.8
+++ b/man/batctl.8
@@ -178,6 +178,8 @@ All of the debug tables support the following options:
The originator table also supports the "\-t" filter option to remove all originators from the output that have not been seen
for the specified amount of seconds (with optional decimal places).
+The local and global translation tables also support the "\-u" and "\-m" option to only display unicast or multicast translation table announcements respectively.
+
List of debug tables:
.RS 10
\- originators|o
--
1.7.10.4
^ permalink raw reply related [flat|nested] 5+ messages in thread