[PATCH 3/4] ARM: DT: STi: Add DT node for MiPHY365x

[kishon@ti.com (Kishon Vijay Abraham I)]

Hi,

On Friday 14 February 2014 04:53 PM, Lee Jones wrote:
> The MiPHY365x is a Generic PHY which can serve various SATA or PCIe
> devices. It has 2 ports which it can use for either; both SATA, both
> PCIe or one of each in any configuration.
>
> Cc: devicetree at vger.kernel.org
> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

since this uses 'dt-bindings/phy/phy-miphy365x.h' which is used in phy 
driver as well, I need ACK from dt maintainers so that I can queue both 
the driver and dt patches myself.

Thanks
Kishon
> ---
>   arch/arm/boot/dts/stih416-b2020-revE.dts |  6 +++++-
>   arch/arm/boot/dts/stih416-b2020.dts      |  6 ++++++
>   arch/arm/boot/dts/stih416.dtsi           | 13 +++++++++++++
>   3 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
> index a874570..dbe67fa 100644
> --- a/arch/arm/boot/dts/stih416-b2020-revE.dts
> +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
> @@ -32,6 +32,10 @@
>   		ethernet1: ethernet at fef08000 {
>   			snps,reset-gpio 	= <&PIO0 7>;
>   		};
> -	};
>
> +		miphy365x_phy: miphy365x at 0 {
> +			st,pcie_tx_pol_inv = <1>;
> +			st,sata_gen = "gen3";
> +		};
> +	};
>   };
> diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
> index 276f28d..fd9cbad 100644
> --- a/arch/arm/boot/dts/stih416-b2020.dts
> +++ b/arch/arm/boot/dts/stih416-b2020.dts
> @@ -13,4 +13,10 @@
>   	model = "STiH416 B2020";
>   	compatible = "st,stih416", "st,stih416-b2020";
>
> +	soc {
> +		miphy365x_phy: miphy365x at 0 {
> +			st,pcie_tx_pol_inv = <1>;
> +			st,sata_gen = "gen3";
> +		};
> +	};
>   };
> diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
> index 85b8063..9fd8efb 100644
> --- a/arch/arm/boot/dts/stih416.dtsi
> +++ b/arch/arm/boot/dts/stih416.dtsi
> @@ -9,6 +9,8 @@
>   #include "stih41x.dtsi"
>   #include "stih416-clock.dtsi"
>   #include "stih416-pinctrl.dtsi"
> +
> +#include <dt-bindings/phy/phy-miphy365x.h>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/reset-controller/stih416-resets.h>
>   / {
> @@ -140,5 +142,16 @@
>   			clocks		= <&CLK_S_ICN_REG_0>;
>   		};
>
> +		miphy365x_phy: miphy365x at 0 {
> +			compatible      = "st,miphy365x-phy";
> +			reg        	= <0xfe382000 0x100>,
> +					  <0xfe38a000 0x100>,
> +					  <0xfe394000 0x100>,
> +					  <0xfe804000 0x100>;
> +			reg-names  	= "sata0", "sata1", "pcie0", "pcie1";
> +
> +			#phy-cells 	= <2>;
> +			st,syscfg  	= <&syscfg_rear>;
> +		};
>   	};
>   };
>