All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans Verkuil <hverkuil@xs4all.nl>
To: Linux Media Mailing List <linux-media@vger.kernel.org>,
	Antti Palosaari <crope@iki.fi>
Subject: [PATCH] rtl2832u_sdr: fixing v4l2-compliance issues
Date: Thu, 06 Mar 2014 00:21:38 +0100	[thread overview]
Message-ID: <5317B182.8050200@xs4all.nl> (raw)

Antti,

Attached is a patch that fixed all but one v4l2-compliance error:

                fail: v4l2-test-controls.cpp(295): returned control value out of range
                fail: v4l2-test-controls.cpp(357): invalid control 00a2090c
        test VIDIOC_G/S_CTRL: FAIL
                fail: v4l2-test-controls.cpp(465): returned control value out of range
                fail: v4l2-test-controls.cpp(573): invalid control 00a2090c
        test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL

That's the BANDWIDTH control and it returned value 3200000 when the minimum was 6000000.
I couldn't trace where that came from in the limited time I spent on it, I expect you
can find it much quicker.

I did my testing with this tree:

http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/sdr

which is a merge of your tree:

http://git.linuxtv.org/media-tree.git/shortlog/refs/heads/sdr

and my ongoing vb2-fixes tree:

http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/vb2-part4

I leave it to you to process this patch further.

Regards,

	Hans

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

diff --git a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
index ac487cb..3013305 100644
--- a/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
+++ b/drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
@@ -120,6 +120,7 @@ struct rtl2832_sdr_state {
 	struct vb2_queue vb_queue;
 	struct list_head queued_bufs;
 	spinlock_t queued_bufs_lock; /* Protects queued_bufs */
+	unsigned sequence;	     /* buffer sequence counter */
 
 	/* Note if taking both locks v4l2_lock must always be locked first! */
 	struct mutex v4l2_lock;      /* Protects everything else */
@@ -415,6 +416,8 @@ static void rtl2832_sdr_urb_complete(struct urb *urb)
 		len = rtl2832_sdr_convert_stream(s, ptr, urb->transfer_buffer,
 				urb->actual_length);
 		vb2_set_plane_payload(&fbuf->vb, 0, len);
+		v4l2_get_timestamp(&fbuf->vb.v4l2_buf.timestamp);
+		fbuf->vb.v4l2_buf.sequence = s->sequence++;
 		vb2_buffer_done(&fbuf->vb, VB2_BUF_STATE_DONE);
 	}
 skip:
@@ -611,8 +614,9 @@ static int rtl2832_sdr_queue_setup(struct vb2_queue *vq,
 	struct rtl2832_sdr_state *s = vb2_get_drv_priv(vq);
 	dev_dbg(&s->udev->dev, "%s: *nbuffers=%d\n", __func__, *nbuffers);
 
-	/* Absolute min and max number of buffers available for mmap() */
-	*nbuffers = clamp_t(unsigned int, *nbuffers, 8, 32);
+	/* Need at least 8 buffers */
+	if (vq->num_buffers + *nbuffers < 8)
+		*nbuffers = 8 - vq->num_buffers;
 	*nplanes = 1;
 	/* 2 = max 16-bit sample returned */
 	sizes[0] = PAGE_ALIGN(BULK_BUFFER_SIZE * 2);
@@ -1013,6 +1017,8 @@ static int rtl2832_sdr_start_streaming(struct vb2_queue *vq, unsigned int count)
 	if (ret)
 		goto err;
 
+	s->sequence = 0;
+
 	ret = rtl2832_sdr_submit_urbs(s);
 	if (ret)
 		goto err;
@@ -1087,6 +1093,8 @@ static int rtl2832_sdr_s_tuner(struct file *file, void *priv,
 	struct rtl2832_sdr_state *s = video_drvdata(file);
 	dev_dbg(&s->udev->dev, "%s:\n", __func__);
 
+	if (v->index > 1)
+		return -EINVAL;
 	return 0;
 }
 
@@ -1122,12 +1130,15 @@ static int rtl2832_sdr_g_frequency(struct file *file, void *priv,
 	dev_dbg(&s->udev->dev, "%s: tuner=%d type=%d\n",
 			__func__, f->tuner, f->type);
 
-	if (f->tuner == 0)
+	if (f->tuner == 0) {
 		f->frequency = s->f_adc;
-	else if (f->tuner == 1)
+		f->type = V4L2_TUNER_ADC;
+	} else if (f->tuner == 1) {
 		f->frequency = s->f_tuner;
-	else
+		f->type = V4L2_TUNER_RF;
+	} else {
 		return -EINVAL;
+	}
 
 	return ret;
 }
@@ -1161,7 +1172,9 @@ static int rtl2832_sdr_s_frequency(struct file *file, void *priv,
 				__func__, s->f_adc);
 		ret = rtl2832_sdr_set_adc(s);
 	} else if (f->tuner == 1) {
-		s->f_tuner = f->frequency;
+		s->f_tuner = clamp_t(unsigned int, f->frequency,
+				bands_fm[0].rangelow,
+				bands_fm[0].rangehigh);
 		dev_dbg(&s->udev->dev, "%s: RF frequency=%u Hz\n",
 				__func__, f->frequency);
 
@@ -1195,6 +1208,7 @@ static int rtl2832_sdr_g_fmt_sdr_cap(struct file *file, void *priv,
 	dev_dbg(&s->udev->dev, "%s:\n", __func__);
 
 	f->fmt.sdr.pixelformat = s->pixelformat;
+	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
 
 	return 0;
 }
@@ -1211,6 +1225,7 @@ static int rtl2832_sdr_s_fmt_sdr_cap(struct file *file, void *priv,
 	if (vb2_is_busy(q))
 		return -EBUSY;
 
+	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
 	for (i = 0; i < NUM_FORMATS; i++) {
 		if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
 			s->pixelformat = f->fmt.sdr.pixelformat;
@@ -1232,6 +1247,7 @@ static int rtl2832_sdr_try_fmt_sdr_cap(struct file *file, void *priv,
 	dev_dbg(&s->udev->dev, "%s: pixelformat fourcc %4.4s\n", __func__,
 			(char *)&f->fmt.sdr.pixelformat);
 
+	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
 	for (i = 0; i < NUM_FORMATS; i++) {
 		if (formats[i].pixelformat == f->fmt.sdr.pixelformat)
 			return 0;
@@ -1362,6 +1378,7 @@ struct dvb_frontend *rtl2832_sdr_attach(struct dvb_frontend *fe,
 	s->i2c = i2c;
 	s->cfg = cfg;
 	s->f_adc = bands_adc[0].rangelow;
+	s->f_tuner = bands_fm[0].rangelow;
 	s->pixelformat =  V4L2_SDR_FMT_CU8;
 
 	mutex_init(&s->v4l2_lock);

             reply	other threads:[~2014-03-05 23:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-05 23:21 Hans Verkuil [this message]
2014-03-10 10:36 ` [PATCH] rtl2832u_sdr: fixing v4l2-compliance issues Antti Palosaari
2014-03-10 15:29 ` Antti Palosaari
2014-03-10 15:36   ` Hans Verkuil
2014-03-10 15:40     ` Antti Palosaari

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5317B182.8050200@xs4all.nl \
    --to=hverkuil@xs4all.nl \
    --cc=crope@iki.fi \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.