* [PATCH 0/2] Move header files from dt-bindings/clk to dt-bindings/clock
@ 2014-03-06 6:04 ` Tushar Behera
0 siblings, 0 replies; 23+ messages in thread
From: Tushar Behera @ 2014-03-06 6:04 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc, devicetree, linux-doc
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rob,
linux, plagnioj, kgene.kim, t.figa
Clock related headers files are mostly located in include/dt-bindings/clock
folder. There are only 2 header files left in include/dt-bindings/clk. Move them
to the most used folder.
All changes related to a single file movement are contained in a single patch
to avoid any build breakage.
The patches are based next-20140305.
Tushar Behera (2):
dt-bindings: clock: Move at91.h to dt-bindigs/clock
dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock
.../devicetree/bindings/clock/at91-clock.txt | 2 +-
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
arch/arm/boot/dts/exynos5420.dtsi | 2 +-
arch/arm/boot/dts/sama5d3.dtsi | 2 +-
arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +-
arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +-
arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +-
drivers/clk/samsung/clk-exynos-audss.c | 2 +-
include/dt-bindings/{clk => clock}/at91.h | 0
.../dt-bindings/{clk => clock}/exynos-audss-clk.h | 0
10 files changed, 8 insertions(+), 8 deletions(-)
rename include/dt-bindings/{clk => clock}/at91.h (100%)
rename include/dt-bindings/{clk => clock}/exynos-audss-clk.h (100%)
--
1.7.9.5
^ permalink raw reply [flat|nested] 23+ messages in thread* [PATCH 0/2] Move header files from dt-bindings/clk to dt-bindings/clock @ 2014-03-06 6:04 ` Tushar Behera 0 siblings, 0 replies; 23+ messages in thread From: Tushar Behera @ 2014-03-06 6:04 UTC (permalink / raw) To: linux-arm-kernel Clock related headers files are mostly located in include/dt-bindings/clock folder. There are only 2 header files left in include/dt-bindings/clk. Move them to the most used folder. All changes related to a single file movement are contained in a single patch to avoid any build breakage. The patches are based next-20140305. Tushar Behera (2): dt-bindings: clock: Move at91.h to dt-bindigs/clock dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock .../devicetree/bindings/clock/at91-clock.txt | 2 +- arch/arm/boot/dts/exynos5250.dtsi | 2 +- arch/arm/boot/dts/exynos5420.dtsi | 2 +- arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +- arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +- arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +- drivers/clk/samsung/clk-exynos-audss.c | 2 +- include/dt-bindings/{clk => clock}/at91.h | 0 .../dt-bindings/{clk => clock}/exynos-audss-clk.h | 0 10 files changed, 8 insertions(+), 8 deletions(-) rename include/dt-bindings/{clk => clock}/at91.h (100%) rename include/dt-bindings/{clk => clock}/exynos-audss-clk.h (100%) -- 1.7.9.5 ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 1/2] dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-03-06 6:04 ` Tushar Behera @ 2014-03-06 6:04 ` Tushar Behera -1 siblings, 0 replies; 23+ messages in thread From: Tushar Behera @ 2014-03-06 6:04 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc, devicetree, linux-doc Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rob, linux, plagnioj, kgene.kim, t.figa Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: Rob Landley <rob@landley.net> CC: Andrew Victor <linux@maxim.org.za> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> --- .../devicetree/bindings/clock/at91-clock.txt | 2 +- arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +- arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +- arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +- include/dt-bindings/{clk => clock}/at91.h | 0 6 files changed, 5 insertions(+), 5 deletions(-) rename include/dt-bindings/{clk => clock}/at91.h (100%) diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index cd5e239..6794cdc 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -62,7 +62,7 @@ Required properties for PMC node: - interrupt-controller : tell that the PMC is an interrupt controller. - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, and reflect the bit position in the PMC_ER/DR/SR registers. - You can use the dt macros defined in dt-bindings/clk/at91.h. + You can use the dt macros defined in dt-bindings/clock/at91.h. 0 (AT91_PMC_MOSCS) -> main oscillator ready 1 (AT91_PMC_LOCKA) -> PLL A ready 2 (AT91_PMC_LOCKB) -> PLL B ready diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 3d5faf8..8c977b5 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -13,7 +13,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel SAMA5D3 family SoC"; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index b029fe7..1b02208 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { ahb { diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 382b044..0284845 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index a9fa75e..7a8d4c6 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h similarity index 100% rename from include/dt-bindings/clk/at91.h rename to include/dt-bindings/clock/at91.h -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 1/2] dt-bindings: clock: Move at91.h to dt-bindigs/clock @ 2014-03-06 6:04 ` Tushar Behera 0 siblings, 0 replies; 23+ messages in thread From: Tushar Behera @ 2014-03-06 6:04 UTC (permalink / raw) To: linux-arm-kernel Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: Rob Landley <rob@landley.net> CC: Andrew Victor <linux@maxim.org.za> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> --- .../devicetree/bindings/clock/at91-clock.txt | 2 +- arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +- arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +- arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +- include/dt-bindings/{clk => clock}/at91.h | 0 6 files changed, 5 insertions(+), 5 deletions(-) rename include/dt-bindings/{clk => clock}/at91.h (100%) diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index cd5e239..6794cdc 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -62,7 +62,7 @@ Required properties for PMC node: - interrupt-controller : tell that the PMC is an interrupt controller. - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, and reflect the bit position in the PMC_ER/DR/SR registers. - You can use the dt macros defined in dt-bindings/clk/at91.h. + You can use the dt macros defined in dt-bindings/clock/at91.h. 0 (AT91_PMC_MOSCS) -> main oscillator ready 1 (AT91_PMC_LOCKA) -> PLL A ready 2 (AT91_PMC_LOCKB) -> PLL B ready diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 3d5faf8..8c977b5 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -13,7 +13,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel SAMA5D3 family SoC"; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index b029fe7..1b02208 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { ahb { diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 382b044..0284845 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index a9fa75e..7a8d4c6 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h similarity index 100% rename from include/dt-bindings/clk/at91.h rename to include/dt-bindings/clock/at91.h -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 1/2] dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-03-06 6:04 ` Tushar Behera (?) @ 2014-03-07 15:24 ` Boris BREZILLON -1 siblings, 0 replies; 23+ messages in thread From: Boris BREZILLON @ 2014-03-07 15:24 UTC (permalink / raw) To: linux-arm-kernel Le 06/03/2014 07:04, Tushar Behera a ?crit : > Most of the clock related dt-binding header files are located in > dt-bindings/clock folder. It would be good to keep all the similar > header files at a single location. It seems I chose the wrong place when I decided to put at91 macros in this directory :-) > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com> > CC: Rob Landley <rob@landley.net> > CC: Andrew Victor <linux@maxim.org.za> > CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> > --- > .../devicetree/bindings/clock/at91-clock.txt | 2 +- > arch/arm/boot/dts/sama5d3.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +- > include/dt-bindings/{clk => clock}/at91.h | 0 > 6 files changed, 5 insertions(+), 5 deletions(-) > rename include/dt-bindings/{clk => clock}/at91.h (100%) > > diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt > index cd5e239..6794cdc 100644 > --- a/Documentation/devicetree/bindings/clock/at91-clock.txt > +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt > @@ -62,7 +62,7 @@ Required properties for PMC node: > - interrupt-controller : tell that the PMC is an interrupt controller. > - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, > and reflect the bit position in the PMC_ER/DR/SR registers. > - You can use the dt macros defined in dt-bindings/clk/at91.h. > + You can use the dt macros defined in dt-bindings/clock/at91.h. > 0 (AT91_PMC_MOSCS) -> main oscillator ready > 1 (AT91_PMC_LOCKA) -> PLL A ready > 2 (AT91_PMC_LOCKB) -> PLL B ready > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index 3d5faf8..8c977b5 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -13,7 +13,7 @@ > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > model = "Atmel SAMA5D3 family SoC"; > diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi > index b029fe7..1b02208 100644 > --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi > +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > ahb { > diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > index 382b044..0284845 100644 > --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi > +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi > index a9fa75e..7a8d4c6 100644 > --- a/arch/arm/boot/dts/sama5d3_uart.dtsi > +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h > similarity index 100% > rename from include/dt-bindings/clk/at91.h > rename to include/dt-bindings/clock/at91.h ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/2] dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-03-06 6:04 ` Tushar Behera @ 2014-03-10 11:05 ` Nicolas Ferre -1 siblings, 0 replies; 23+ messages in thread From: Nicolas Ferre @ 2014-03-10 11:05 UTC (permalink / raw) To: Tushar Behera, linux-arm-kernel, devicetree, linux-doc Cc: linux-samsung-soc, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rob, linux, plagnioj, kgene.kim, t.figa On 06/03/2014 07:04, Tushar Behera : > Most of the clock related dt-binding header files are located in > dt-bindings/clock folder. It would be good to keep all the similar > header files at a single location. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > CC: Rob Landley <rob@landley.net> > CC: Andrew Victor <linux@maxim.org.za> > CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > .../devicetree/bindings/clock/at91-clock.txt | 2 +- > arch/arm/boot/dts/sama5d3.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +- > include/dt-bindings/{clk => clock}/at91.h | 0 > 6 files changed, 5 insertions(+), 5 deletions(-) > rename include/dt-bindings/{clk => clock}/at91.h (100%) > > diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt > index cd5e239..6794cdc 100644 > --- a/Documentation/devicetree/bindings/clock/at91-clock.txt > +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt > @@ -62,7 +62,7 @@ Required properties for PMC node: > - interrupt-controller : tell that the PMC is an interrupt controller. > - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, > and reflect the bit position in the PMC_ER/DR/SR registers. > - You can use the dt macros defined in dt-bindings/clk/at91.h. > + You can use the dt macros defined in dt-bindings/clock/at91.h. > 0 (AT91_PMC_MOSCS) -> main oscillator ready > 1 (AT91_PMC_LOCKA) -> PLL A ready > 2 (AT91_PMC_LOCKB) -> PLL B ready > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index 3d5faf8..8c977b5 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -13,7 +13,7 @@ > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > model = "Atmel SAMA5D3 family SoC"; > diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi > index b029fe7..1b02208 100644 > --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi > +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > ahb { > diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > index 382b044..0284845 100644 > --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi > +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi > index a9fa75e..7a8d4c6 100644 > --- a/arch/arm/boot/dts/sama5d3_uart.dtsi > +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h > similarity index 100% > rename from include/dt-bindings/clk/at91.h > rename to include/dt-bindings/clock/at91.h > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 1/2] dt-bindings: clock: Move at91.h to dt-bindigs/clock @ 2014-03-10 11:05 ` Nicolas Ferre 0 siblings, 0 replies; 23+ messages in thread From: Nicolas Ferre @ 2014-03-10 11:05 UTC (permalink / raw) To: linux-arm-kernel On 06/03/2014 07:04, Tushar Behera : > Most of the clock related dt-binding header files are located in > dt-bindings/clock folder. It would be good to keep all the similar > header files at a single location. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > CC: Rob Landley <rob@landley.net> > CC: Andrew Victor <linux@maxim.org.za> > CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > .../devicetree/bindings/clock/at91-clock.txt | 2 +- > arch/arm/boot/dts/sama5d3.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +- > include/dt-bindings/{clk => clock}/at91.h | 0 > 6 files changed, 5 insertions(+), 5 deletions(-) > rename include/dt-bindings/{clk => clock}/at91.h (100%) > > diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt > index cd5e239..6794cdc 100644 > --- a/Documentation/devicetree/bindings/clock/at91-clock.txt > +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt > @@ -62,7 +62,7 @@ Required properties for PMC node: > - interrupt-controller : tell that the PMC is an interrupt controller. > - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, > and reflect the bit position in the PMC_ER/DR/SR registers. > - You can use the dt macros defined in dt-bindings/clk/at91.h. > + You can use the dt macros defined in dt-bindings/clock/at91.h. > 0 (AT91_PMC_MOSCS) -> main oscillator ready > 1 (AT91_PMC_LOCKA) -> PLL A ready > 2 (AT91_PMC_LOCKB) -> PLL B ready > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index 3d5faf8..8c977b5 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -13,7 +13,7 @@ > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > model = "Atmel SAMA5D3 family SoC"; > diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi > index b029fe7..1b02208 100644 > --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi > +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > ahb { > diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > index 382b044..0284845 100644 > --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi > +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi > index a9fa75e..7a8d4c6 100644 > --- a/arch/arm/boot/dts/sama5d3_uart.dtsi > +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h > similarity index 100% > rename from include/dt-bindings/clk/at91.h > rename to include/dt-bindings/clock/at91.h > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 1/2] dt-bindings: clock: Move at91.h to dt-bindigs/clock 2014-03-06 6:04 ` Tushar Behera @ 2014-04-18 15:53 ` Nicolas Ferre -1 siblings, 0 replies; 23+ messages in thread From: Nicolas Ferre @ 2014-04-18 15:53 UTC (permalink / raw) To: Tushar Behera, linux-arm-kernel, devicetree, linux-doc Cc: linux-samsung-soc, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rob, linux, plagnioj, kgene.kim, t.figa On 06/03/2014 07:04, Tushar Behera : > Most of the clock related dt-binding header files are located in > dt-bindings/clock folder. It would be good to keep all the similar > header files at a single location. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > CC: Rob Landley <rob@landley.net> > CC: Andrew Victor <linux@maxim.org.za> > CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> I have just added at91sam9261 and at91sam9rl which appeared in 3.15 merge window and stacked this patch on top of at91-3.15-fixes. I hope that it will be accepted for 3.15. Bye, > --- > .../devicetree/bindings/clock/at91-clock.txt | 2 +- > arch/arm/boot/dts/sama5d3.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +- > include/dt-bindings/{clk => clock}/at91.h | 0 > 6 files changed, 5 insertions(+), 5 deletions(-) > rename include/dt-bindings/{clk => clock}/at91.h (100%) > > diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt > index cd5e239..6794cdc 100644 > --- a/Documentation/devicetree/bindings/clock/at91-clock.txt > +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt > @@ -62,7 +62,7 @@ Required properties for PMC node: > - interrupt-controller : tell that the PMC is an interrupt controller. > - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, > and reflect the bit position in the PMC_ER/DR/SR registers. > - You can use the dt macros defined in dt-bindings/clk/at91.h. > + You can use the dt macros defined in dt-bindings/clock/at91.h. > 0 (AT91_PMC_MOSCS) -> main oscillator ready > 1 (AT91_PMC_LOCKA) -> PLL A ready > 2 (AT91_PMC_LOCKB) -> PLL B ready > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index 3d5faf8..8c977b5 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -13,7 +13,7 @@ > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > model = "Atmel SAMA5D3 family SoC"; > diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi > index b029fe7..1b02208 100644 > --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi > +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > ahb { > diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > index 382b044..0284845 100644 > --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi > +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi > index a9fa75e..7a8d4c6 100644 > --- a/arch/arm/boot/dts/sama5d3_uart.dtsi > +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h > similarity index 100% > rename from include/dt-bindings/clk/at91.h > rename to include/dt-bindings/clock/at91.h > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 1/2] dt-bindings: clock: Move at91.h to dt-bindigs/clock @ 2014-04-18 15:53 ` Nicolas Ferre 0 siblings, 0 replies; 23+ messages in thread From: Nicolas Ferre @ 2014-04-18 15:53 UTC (permalink / raw) To: linux-arm-kernel On 06/03/2014 07:04, Tushar Behera : > Most of the clock related dt-binding header files are located in > dt-bindings/clock folder. It would be good to keep all the similar > header files at a single location. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > CC: Rob Landley <rob@landley.net> > CC: Andrew Victor <linux@maxim.org.za> > CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> I have just added at91sam9261 and at91sam9rl which appeared in 3.15 merge window and stacked this patch on top of at91-3.15-fixes. I hope that it will be accepted for 3.15. Bye, > --- > .../devicetree/bindings/clock/at91-clock.txt | 2 +- > arch/arm/boot/dts/sama5d3.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +- > arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +- > include/dt-bindings/{clk => clock}/at91.h | 0 > 6 files changed, 5 insertions(+), 5 deletions(-) > rename include/dt-bindings/{clk => clock}/at91.h (100%) > > diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt > index cd5e239..6794cdc 100644 > --- a/Documentation/devicetree/bindings/clock/at91-clock.txt > +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt > @@ -62,7 +62,7 @@ Required properties for PMC node: > - interrupt-controller : tell that the PMC is an interrupt controller. > - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, > and reflect the bit position in the PMC_ER/DR/SR registers. > - You can use the dt macros defined in dt-bindings/clk/at91.h. > + You can use the dt macros defined in dt-bindings/clock/at91.h. > 0 (AT91_PMC_MOSCS) -> main oscillator ready > 1 (AT91_PMC_LOCKA) -> PLL A ready > 2 (AT91_PMC_LOCKB) -> PLL B ready > diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi > index 3d5faf8..8c977b5 100644 > --- a/arch/arm/boot/dts/sama5d3.dtsi > +++ b/arch/arm/boot/dts/sama5d3.dtsi > @@ -13,7 +13,7 @@ > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/gpio/gpio.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > model = "Atmel SAMA5D3 family SoC"; > diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi > index b029fe7..1b02208 100644 > --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi > +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > ahb { > diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > index 382b044..0284845 100644 > --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi > +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi > index a9fa75e..7a8d4c6 100644 > --- a/arch/arm/boot/dts/sama5d3_uart.dtsi > +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi > @@ -9,7 +9,7 @@ > > #include <dt-bindings/pinctrl/at91.h> > #include <dt-bindings/interrupt-controller/irq.h> > -#include <dt-bindings/clk/at91.h> > +#include <dt-bindings/clock/at91.h> > > / { > aliases { > diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h > similarity index 100% > rename from include/dt-bindings/clk/at91.h > rename to include/dt-bindings/clock/at91.h > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock 2014-03-06 6:04 ` Tushar Behera @ 2014-03-06 6:04 ` Tushar Behera -1 siblings, 0 replies; 23+ messages in thread From: Tushar Behera @ 2014-03-06 6:04 UTC (permalink / raw) To: linux-arm-kernel, linux-samsung-soc, devicetree, linux-doc Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rob, linux, plagnioj, kgene.kim, t.figa Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: Kukjin Kim <kgene.kim@samsung.com> CC: Tomasz Figa <t.figa@samsung.com> --- arch/arm/boot/dts/exynos5250.dtsi | 2 +- arch/arm/boot/dts/exynos5420.dtsi | 2 +- drivers/clk/samsung/clk-exynos-audss.c | 2 +- .../dt-bindings/{clk => clock}/exynos-audss-clk.h | 0 4 files changed, 3 insertions(+), 3 deletions(-) rename include/dt-bindings/{clk => clock}/exynos-audss-clk.h (100%) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 8f6300f..2048012 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -20,7 +20,7 @@ #include "exynos5.dtsi" #include "exynos5250-pinctrl.dtsi" -#include <dt-bindings/clk/exynos-audss-clk.h> +#include <dt-bindings/clock/exynos-audss-clk.h> / { compatible = "samsung,exynos5250"; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 45e2e65..64c7f6d 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -16,7 +16,7 @@ #include "exynos5.dtsi" #include "exynos5420-pinctrl.dtsi" -#include <dt-bindings/clk/exynos-audss-clk.h> +#include <dt-bindings/clock/exynos-audss-clk.h> / { compatible = "samsung,exynos5420"; diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c index 884187f..13eae14c 100644 --- a/drivers/clk/samsung/clk-exynos-audss.c +++ b/drivers/clk/samsung/clk-exynos-audss.c @@ -17,7 +17,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <dt-bindings/clk/exynos-audss-clk.h> +#include <dt-bindings/clock/exynos-audss-clk.h> enum exynos_audss_clk_type { TYPE_EXYNOS4210, diff --git a/include/dt-bindings/clk/exynos-audss-clk.h b/include/dt-bindings/clock/exynos-audss-clk.h similarity index 100% rename from include/dt-bindings/clk/exynos-audss-clk.h rename to include/dt-bindings/clock/exynos-audss-clk.h -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock @ 2014-03-06 6:04 ` Tushar Behera 0 siblings, 0 replies; 23+ messages in thread From: Tushar Behera @ 2014-03-06 6:04 UTC (permalink / raw) To: linux-arm-kernel Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: Kukjin Kim <kgene.kim@samsung.com> CC: Tomasz Figa <t.figa@samsung.com> --- arch/arm/boot/dts/exynos5250.dtsi | 2 +- arch/arm/boot/dts/exynos5420.dtsi | 2 +- drivers/clk/samsung/clk-exynos-audss.c | 2 +- .../dt-bindings/{clk => clock}/exynos-audss-clk.h | 0 4 files changed, 3 insertions(+), 3 deletions(-) rename include/dt-bindings/{clk => clock}/exynos-audss-clk.h (100%) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 8f6300f..2048012 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -20,7 +20,7 @@ #include "exynos5.dtsi" #include "exynos5250-pinctrl.dtsi" -#include <dt-bindings/clk/exynos-audss-clk.h> +#include <dt-bindings/clock/exynos-audss-clk.h> / { compatible = "samsung,exynos5250"; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 45e2e65..64c7f6d 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -16,7 +16,7 @@ #include "exynos5.dtsi" #include "exynos5420-pinctrl.dtsi" -#include <dt-bindings/clk/exynos-audss-clk.h> +#include <dt-bindings/clock/exynos-audss-clk.h> / { compatible = "samsung,exynos5420"; diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c index 884187f..13eae14c 100644 --- a/drivers/clk/samsung/clk-exynos-audss.c +++ b/drivers/clk/samsung/clk-exynos-audss.c @@ -17,7 +17,7 @@ #include <linux/module.h> #include <linux/platform_device.h> -#include <dt-bindings/clk/exynos-audss-clk.h> +#include <dt-bindings/clock/exynos-audss-clk.h> enum exynos_audss_clk_type { TYPE_EXYNOS4210, diff --git a/include/dt-bindings/clk/exynos-audss-clk.h b/include/dt-bindings/clock/exynos-audss-clk.h similarity index 100% rename from include/dt-bindings/clk/exynos-audss-clk.h rename to include/dt-bindings/clock/exynos-audss-clk.h -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock 2014-03-06 6:04 ` Tushar Behera @ 2014-03-06 6:34 ` Sachin Kamat -1 siblings, 0 replies; 23+ messages in thread From: Sachin Kamat @ 2014-03-06 6:34 UTC (permalink / raw) To: Tushar Behera Cc: linux-arm-kernel, linux-samsung-soc, devicetree@vger.kernel.org, linux-doc, robh+dt@kernel.org, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Rob Landley, linux, plagnioj, Kukjin Kim, Tomasz Figa On 6 March 2014 11:34, Tushar Behera <tushar.behera@linaro.org> wrote: > Most of the clock related dt-binding header files are located in > dt-bindings/clock folder. It would be good to keep all the similar > header files at a single location. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > CC: Kukjin Kim <kgene.kim@samsung.com> > CC: Tomasz Figa <t.figa@samsung.com> > --- Sensible move. Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> Now that the dt-bindings/clk folder is empty (with these 2 patches applied), it can be deleted as well. -- With warm regards, Sachin ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock @ 2014-03-06 6:34 ` Sachin Kamat 0 siblings, 0 replies; 23+ messages in thread From: Sachin Kamat @ 2014-03-06 6:34 UTC (permalink / raw) To: linux-arm-kernel On 6 March 2014 11:34, Tushar Behera <tushar.behera@linaro.org> wrote: > Most of the clock related dt-binding header files are located in > dt-bindings/clock folder. It would be good to keep all the similar > header files at a single location. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > CC: Kukjin Kim <kgene.kim@samsung.com> > CC: Tomasz Figa <t.figa@samsung.com> > --- Sensible move. Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> Now that the dt-bindings/clk folder is empty (with these 2 patches applied), it can be deleted as well. -- With warm regards, Sachin ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock 2014-03-06 6:34 ` Sachin Kamat @ 2014-03-06 8:17 ` Tushar Behera -1 siblings, 0 replies; 23+ messages in thread From: Tushar Behera @ 2014-03-06 8:17 UTC (permalink / raw) To: Sachin Kamat Cc: linux-arm-kernel, linux-samsung-soc, devicetree@vger.kernel.org, linux-doc, robh+dt@kernel.org, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Rob Landley, linux, plagnioj, Kukjin Kim, Tomasz Figa On 6 March 2014 12:04, Sachin Kamat <sachin.kamat@linaro.org> wrote: > On 6 March 2014 11:34, Tushar Behera <tushar.behera@linaro.org> wrote: >> Most of the clock related dt-binding header files are located in >> dt-bindings/clock folder. It would be good to keep all the similar >> header files at a single location. >> >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >> CC: Kukjin Kim <kgene.kim@samsung.com> >> CC: Tomasz Figa <t.figa@samsung.com> >> --- > > Sensible move. > Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> > Thanks for the review. > Now that the dt-bindings/clk folder is empty (with these 2 patches > applied), it can be deleted as well. > Sure, I will wait till both these patches are merged and send another patch for that later. > -- > With warm regards, > Sachin -- Tushar Behera ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock @ 2014-03-06 8:17 ` Tushar Behera 0 siblings, 0 replies; 23+ messages in thread From: Tushar Behera @ 2014-03-06 8:17 UTC (permalink / raw) To: linux-arm-kernel On 6 March 2014 12:04, Sachin Kamat <sachin.kamat@linaro.org> wrote: > On 6 March 2014 11:34, Tushar Behera <tushar.behera@linaro.org> wrote: >> Most of the clock related dt-binding header files are located in >> dt-bindings/clock folder. It would be good to keep all the similar >> header files at a single location. >> >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >> CC: Kukjin Kim <kgene.kim@samsung.com> >> CC: Tomasz Figa <t.figa@samsung.com> >> --- > > Sensible move. > Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org> > Thanks for the review. > Now that the dt-bindings/clk folder is empty (with these 2 patches > applied), it can be deleted as well. > Sure, I will wait till both these patches are merged and send another patch for that later. > -- > With warm regards, > Sachin -- Tushar Behera ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock 2014-03-06 6:04 ` Tushar Behera @ 2014-03-10 0:20 ` Tomasz Figa -1 siblings, 0 replies; 23+ messages in thread From: Tomasz Figa @ 2014-03-10 0:20 UTC (permalink / raw) To: Tushar Behera, linux-arm-kernel, linux-samsung-soc, devicetree, linux-doc Cc: mark.rutland, kgene.kim, pawel.moll, ijc+devicetree, t.figa, robh+dt, rob, galak, plagnioj, linux On 06.03.2014 07:04, Tushar Behera wrote: > Most of the clock related dt-binding header files are located in > dt-bindings/clock folder. It would be good to keep all the similar > header files at a single location. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > CC: Kukjin Kim <kgene.kim@samsung.com> > CC: Tomasz Figa <t.figa@samsung.com> > --- > arch/arm/boot/dts/exynos5250.dtsi | 2 +- > arch/arm/boot/dts/exynos5420.dtsi | 2 +- > drivers/clk/samsung/clk-exynos-audss.c | 2 +- > .../dt-bindings/{clk => clock}/exynos-audss-clk.h | 0 > 4 files changed, 3 insertions(+), 3 deletions(-) > rename include/dt-bindings/{clk => clock}/exynos-audss-clk.h (100%) Acked-by: Tomasz Figa <t.figa@samsung.com> Best regards, Tomasz ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock @ 2014-03-10 0:20 ` Tomasz Figa 0 siblings, 0 replies; 23+ messages in thread From: Tomasz Figa @ 2014-03-10 0:20 UTC (permalink / raw) To: linux-arm-kernel On 06.03.2014 07:04, Tushar Behera wrote: > Most of the clock related dt-binding header files are located in > dt-bindings/clock folder. It would be good to keep all the similar > header files at a single location. > > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > CC: Kukjin Kim <kgene.kim@samsung.com> > CC: Tomasz Figa <t.figa@samsung.com> > --- > arch/arm/boot/dts/exynos5250.dtsi | 2 +- > arch/arm/boot/dts/exynos5420.dtsi | 2 +- > drivers/clk/samsung/clk-exynos-audss.c | 2 +- > .../dt-bindings/{clk => clock}/exynos-audss-clk.h | 0 > 4 files changed, 3 insertions(+), 3 deletions(-) > rename include/dt-bindings/{clk => clock}/exynos-audss-clk.h (100%) Acked-by: Tomasz Figa <t.figa@samsung.com> Best regards, Tomasz ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock 2014-03-10 0:20 ` Tomasz Figa @ 2014-03-17 22:20 ` Kukjin Kim -1 siblings, 0 replies; 23+ messages in thread From: Kukjin Kim @ 2014-03-17 22:20 UTC (permalink / raw) To: Tomasz Figa Cc: Tushar Behera, linux-arm-kernel, linux-samsung-soc, devicetree, linux-doc, mark.rutland, kgene.kim, pawel.moll, ijc+devicetree, t.figa, robh+dt, rob, galak, plagnioj, linux On 03/10/14 09:20, Tomasz Figa wrote: > On 06.03.2014 07:04, Tushar Behera wrote: >> Most of the clock related dt-binding header files are located in >> dt-bindings/clock folder. It would be good to keep all the similar >> header files at a single location. >> >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >> CC: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Or shall I take this into samsung tree? Thanks, Kukjin >> CC: Tomasz Figa <t.figa@samsung.com> >> --- >> arch/arm/boot/dts/exynos5250.dtsi | 2 +- >> arch/arm/boot/dts/exynos5420.dtsi | 2 +- >> drivers/clk/samsung/clk-exynos-audss.c | 2 +- >> .../dt-bindings/{clk => clock}/exynos-audss-clk.h | 0 >> 4 files changed, 3 insertions(+), 3 deletions(-) >> rename include/dt-bindings/{clk => clock}/exynos-audss-clk.h (100%) > > Acked-by: Tomasz Figa <t.figa@samsung.com> > > Best regards, > Tomasz ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock @ 2014-03-17 22:20 ` Kukjin Kim 0 siblings, 0 replies; 23+ messages in thread From: Kukjin Kim @ 2014-03-17 22:20 UTC (permalink / raw) To: linux-arm-kernel On 03/10/14 09:20, Tomasz Figa wrote: > On 06.03.2014 07:04, Tushar Behera wrote: >> Most of the clock related dt-binding header files are located in >> dt-bindings/clock folder. It would be good to keep all the similar >> header files at a single location. >> >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >> CC: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Or shall I take this into samsung tree? Thanks, Kukjin >> CC: Tomasz Figa <t.figa@samsung.com> >> --- >> arch/arm/boot/dts/exynos5250.dtsi | 2 +- >> arch/arm/boot/dts/exynos5420.dtsi | 2 +- >> drivers/clk/samsung/clk-exynos-audss.c | 2 +- >> .../dt-bindings/{clk => clock}/exynos-audss-clk.h | 0 >> 4 files changed, 3 insertions(+), 3 deletions(-) >> rename include/dt-bindings/{clk => clock}/exynos-audss-clk.h (100%) > > Acked-by: Tomasz Figa <t.figa@samsung.com> > > Best regards, > Tomasz ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock 2014-03-17 22:20 ` Kukjin Kim @ 2014-03-18 14:32 ` Tomasz Figa -1 siblings, 0 replies; 23+ messages in thread From: Tomasz Figa @ 2014-03-18 14:32 UTC (permalink / raw) To: Kukjin Kim, Tomasz Figa Cc: Tushar Behera, linux-arm-kernel, linux-samsung-soc, devicetree, linux-doc, mark.rutland, pawel.moll, ijc+devicetree, robh+dt, rob, galak, plagnioj, linux, Grant Likely On 17.03.2014 23:20, Kukjin Kim wrote: > On 03/10/14 09:20, Tomasz Figa wrote: >> On 06.03.2014 07:04, Tushar Behera wrote: >>> Most of the clock related dt-binding header files are located in >>> dt-bindings/clock folder. It would be good to keep all the similar >>> header files at a single location. >>> >>> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >>> CC: Kukjin Kim <kgene.kim@samsung.com> > > Acked-by: Kukjin Kim <kgene.kim@samsung.com> > > Or shall I take this into samsung tree? I guess so. Or should this whole series go through DT tree? Best regards, Tomasz ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock @ 2014-03-18 14:32 ` Tomasz Figa 0 siblings, 0 replies; 23+ messages in thread From: Tomasz Figa @ 2014-03-18 14:32 UTC (permalink / raw) To: linux-arm-kernel On 17.03.2014 23:20, Kukjin Kim wrote: > On 03/10/14 09:20, Tomasz Figa wrote: >> On 06.03.2014 07:04, Tushar Behera wrote: >>> Most of the clock related dt-binding header files are located in >>> dt-bindings/clock folder. It would be good to keep all the similar >>> header files at a single location. >>> >>> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >>> CC: Kukjin Kim <kgene.kim@samsung.com> > > Acked-by: Kukjin Kim <kgene.kim@samsung.com> > > Or shall I take this into samsung tree? I guess so. Or should this whole series go through DT tree? Best regards, Tomasz ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock 2014-03-18 14:32 ` Tomasz Figa @ 2014-03-20 19:32 ` Kukjin Kim -1 siblings, 0 replies; 23+ messages in thread From: Kukjin Kim @ 2014-03-20 19:32 UTC (permalink / raw) To: Tomasz Figa Cc: mark.rutland, devicetree, Kukjin Kim, pawel.moll, linux-doc, ijc+devicetree, Tomasz Figa, robh+dt, Grant Likely, linux-samsung-soc, rob, galak, plagnioj, linux, linux-arm-kernel, Tushar Behera On 03/18/14 23:32, Tomasz Figa wrote: > On 17.03.2014 23:20, Kukjin Kim wrote: >> On 03/10/14 09:20, Tomasz Figa wrote: >>> On 06.03.2014 07:04, Tushar Behera wrote: >>>> Most of the clock related dt-binding header files are located in >>>> dt-bindings/clock folder. It would be good to keep all the similar >>>> header files at a single location. >>>> >>>> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >>>> CC: Kukjin Kim <kgene.kim@samsung.com> >> >> Acked-by: Kukjin Kim <kgene.kim@samsung.com> >> >> Or shall I take this into samsung tree? > > I guess so. > > Or should this whole series go through DT tree? > OK, I've applied into samsung tree. Thanks, Kukjin ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock @ 2014-03-20 19:32 ` Kukjin Kim 0 siblings, 0 replies; 23+ messages in thread From: Kukjin Kim @ 2014-03-20 19:32 UTC (permalink / raw) To: linux-arm-kernel On 03/18/14 23:32, Tomasz Figa wrote: > On 17.03.2014 23:20, Kukjin Kim wrote: >> On 03/10/14 09:20, Tomasz Figa wrote: >>> On 06.03.2014 07:04, Tushar Behera wrote: >>>> Most of the clock related dt-binding header files are located in >>>> dt-bindings/clock folder. It would be good to keep all the similar >>>> header files at a single location. >>>> >>>> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >>>> CC: Kukjin Kim <kgene.kim@samsung.com> >> >> Acked-by: Kukjin Kim <kgene.kim@samsung.com> >> >> Or shall I take this into samsung tree? > > I guess so. > > Or should this whole series go through DT tree? > OK, I've applied into samsung tree. Thanks, Kukjin ^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2014-04-18 15:53 UTC | newest] Thread overview: 23+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-03-06 6:04 [PATCH 0/2] Move header files from dt-bindings/clk to dt-bindings/clock Tushar Behera 2014-03-06 6:04 ` Tushar Behera 2014-03-06 6:04 ` [PATCH 1/2] dt-bindings: clock: Move at91.h to dt-bindigs/clock Tushar Behera 2014-03-06 6:04 ` Tushar Behera 2014-03-07 15:24 ` Boris BREZILLON 2014-03-10 11:05 ` Nicolas Ferre 2014-03-10 11:05 ` Nicolas Ferre 2014-04-18 15:53 ` Nicolas Ferre 2014-04-18 15:53 ` Nicolas Ferre 2014-03-06 6:04 ` [PATCH 2/2] dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock Tushar Behera 2014-03-06 6:04 ` Tushar Behera 2014-03-06 6:34 ` Sachin Kamat 2014-03-06 6:34 ` Sachin Kamat 2014-03-06 8:17 ` Tushar Behera 2014-03-06 8:17 ` Tushar Behera 2014-03-10 0:20 ` Tomasz Figa 2014-03-10 0:20 ` Tomasz Figa 2014-03-17 22:20 ` Kukjin Kim 2014-03-17 22:20 ` Kukjin Kim 2014-03-18 14:32 ` Tomasz Figa 2014-03-18 14:32 ` Tomasz Figa 2014-03-20 19:32 ` Kukjin Kim 2014-03-20 19:32 ` Kukjin Kim
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.