RESEND [PATCH V9 2/2] ARM: dts: exynos5250: Enable ahci sata and sata phy

[t.figa@samsung.com (Tomasz Figa)]

Hi Yuvaraj,

On 14.03.2014 09:25, Yuvaraj Kumar wrote:
> kgene,
> Please pick this patch.
>
> On Tue, Mar 4, 2014 at 7:02 PM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
>>
>>
>> On Tuesday 04 March 2014 04:40 PM, Yuvaraj Kumar C D wrote:
>>>
>>> This patch adds dt entry for ahci sata controller and its
>>> corresponding phy controller.phy node has been added w.r.t
>>> new generic phy framework.
>>>
>>> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
>>
>>
>> FWIW
>> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
>>
>>> ---
>>>    .../devicetree/bindings/ata/exynos-sata-phy.txt    |   14 --------
>>>    .../devicetree/bindings/ata/exynos-sata.txt        |   25 +++++++++-----
>>>    .../devicetree/bindings/phy/samsung-phy.txt        |   36
>>> ++++++++++++++++++++
>>>    arch/arm/boot/dts/exynos5250-arndale.dts           |   21 ++++++++++++
>>>    arch/arm/boot/dts/exynos5250-smdk5250.dts          |   17 +++++----
>>>    arch/arm/boot/dts/exynos5250.dtsi                  |   18 +++++++---
>>>    6 files changed, 98 insertions(+), 33 deletions(-)
>>>    delete mode 100644
>>> Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>>> b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>>> deleted file mode 100644
>>> index 37824fa..0000000
>>> --- a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>>> +++ /dev/null
>>> @@ -1,14 +0,0 @@
>>> -* Samsung SATA PHY Controller
>>> -
>>> -SATA PHY nodes are defined to describe on-chip SATA Physical layer
>>> controllers.
>>> -Each SATA PHY controller should have its own node.
>>> -
>>> -Required properties:
>>> -- compatible        : compatible list, contains
>>> "samsung,exynos5-sata-phy"
>>> -- reg               : <registers mapping>
>>> -
>>> -Example:
>>> -        sata at ffe07000 {
>>> -                compatible = "samsung,exynos5-sata-phy";
>>> -                reg = <0xffe07000 0x1000>;
>>> -        };
>>> diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt
>>> b/Documentation/devicetree/bindings/ata/exynos-sata.txt
>>> index 0849f10..b2adb1f 100644
>>> --- a/Documentation/devicetree/bindings/ata/exynos-sata.txt
>>> +++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt
>>> @@ -4,14 +4,21 @@ SATA nodes are defined to describe on-chip Serial ATA
>>> controllers.
>>>    Each SATA controller should have its own node.
>>>
>>>    Required properties:
>>> -- compatible        : compatible list, contains "samsung,exynos5-sata"
>>> -- interrupts        : <interrupt mapping for SATA IRQ>
>>> -- reg               : <registers mapping>
>>> -- samsung,sata-freq : <frequency in MHz>
>>> +- compatible           : compatible list, contains "samsung,exynos5-sata"
>>> +- interrupts           : <interrupt mapping for SATA IRQ>
>>> +- reg                  : <registers mapping>
>>> +- samsung,sata-freq    : <frequency in MHz>
>>> +- phys                 : as mentioned in phy-bindings.txt
>>> +- phy-names            : as mentioned in phy-bindings.txt
>>>
>>>    Example:
>>> -        sata at ffe08000 {
>>> -                compatible = "samsung,exynos5-sata";
>>> -                reg = <0xffe08000 0x1000>;
>>> -                interrupts = <115>;
>>> -        };
>>> +       sata at 122f0000 {
>>> +               compatible = "snps,dwc-ahci";
>>> +               samsung,sata-freq = <66>;
>>> +               reg = <0x122f0000 0x1ff>;
>>> +               interrupts = <0 115 0>;
>>> +               clocks = <&clock 277>, <&clock 143>;
>>> +               clock-names = "sata", "sclk_sata";
>>> +               phys = <&sata_phy>;
>>> +               phy-names = "sata-phy";
>>> +       };
>>> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt
>>> b/Documentation/devicetree/bindings/phy/samsung-phy.txt
>>> index c0fccaa..a937f75 100644
>>> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
>>> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
>>> @@ -20,3 +20,39 @@ Required properties:
>>>    - compatible : should be "samsung,exynos5250-dp-video-phy";
>>>    - reg : offset and length of the Display Port PHY register set;
>>>    - #phy-cells : from the generic PHY bindings, must be 0;
>>> +
>>> +Samsung SATA PHY Controller
>>> +---------------------------
>>> +
>>> +SATA PHY nodes are defined to describe on-chip SATA Physical layer
>>> controllers.
>>> +Each SATA PHY controller should have its own node.
>>> +
>>> +Required properties:
>>> +- compatible        : compatible list, contains
>>> "samsung,exynos5250-sata-phy"
>>> +- reg : offset and length of the SATA PHY register set;
>>> +- #phy-cells : from the generic phy bindings;
>>> +
>>> +Example:
>>> +       sata_phy: sata-phy at 12170000 {
>>> +               compatible = "samsung,exynos5250-sata-phy";
>>> +               reg = <0x12170000 0x1ff>;
>>> +               clocks = <&clock 287>;
>>> +               clock-names = "sata_phyctrl";
>>> +               #phy-cells = <0>;
>>> +               samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
>>> +               samsung,syscon-phandle = <&pmu_syscon>;

The example lists properties that are not documented by the text above 
(clocks, clock-names, samsung,exynos-sataphy-i2c-phandle, 
samsung,syscon-phandle). Why is so?

>>> +       };
>>> +
>>> +Device-Tree bindings for sataphy i2c client driver
>>> +--------------------------------------------------
>>> +
>>> +Required properties:
>>> +compatible: Should be "samsung,exynos-sataphy-i2c"
>>> +- reg: I2C address of the sataphy i2c device.
>>> +
>>> +Example:
>>> +
>>> +       sata_phy_i2c:sata-phy at 38 {
>>> +               compatible = "samsung,exynos-sataphy-i2c";
>>> +               reg = <0x38>;
>>> +       };
>>> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
>>> b/arch/arm/boot/dts/exynos5250-arndale.dts
>>> index 38b96a4..97eef40 100644
>>> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
>>> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
>>> @@ -375,6 +375,27 @@
>>>                  };
>>>          };
>>>
>>> +       i2c at 121D0000 {
>>> +               status = "okay";
>>> +               samsung,i2c-sda-delay = <100>;
>>> +               samsung,i2c-max-bus-freq = <40000>;
>>> +               samsung,i2c-slave-addr = <0x38>;
>>> +
>>> +               sata_phy_i2c:sata-phy at 38 {
>>> +                       compatible = "samsung,exynos-sataphy-i2c";
>>> +                       reg = <0x38>;
>>> +               };

This node should be present in SoC-level dtsi file, as the address of 
the PHY does not depend on particular board.

>>> +       };
>>> +
>>> +       sata at 122F0000 {
>>> +               status = "okay";
>>> +       };
>>> +
>>> +       sata-phy at 12170000 {
>>> +               status = "okay";
>>> +               samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;

Same here. The value of samsung,exynos-sataphy-i2c-phandle property is 
not board-specific and should be in higher level dtsi file.

>>> +       };
>>> +
>>>          mmc_0: mmc at 12200000 {
>>>                  status = "okay";
>>>                  num-slots = <1>;
>>> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> index f76946e..81782c1b 100644
>>> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> @@ -242,16 +242,12 @@
>>>                  samsung,i2c-slave-addr = <0x38>;
>>>                  status = "okay";
>>>
>>> -               sata-phy {
>>> -                       compatible = "samsung,sata-phy";
>>> +               sata_phy_i2c:sata-phy at 38 {
>>> +                       compatible = "samsung,exynos-sataphy-i2c";
>>>                          reg = <0x38>;
>>>                  };

Ditto.

>>>          };
>>>
>>> -       sata at 122F0000 {
>>> -               samsung,sata-freq = <66>;
>>> -       };
>>> -
>>>          i2c at 12C80000 {
>>>                  samsung,i2c-sda-delay = <100>;
>>>                  samsung,i2c-max-bus-freq = <66000>;
>>> @@ -274,6 +270,15 @@
>>>                  };
>>>          };
>>>
>>> +       sata at 122F0000 {
>>> +               status = "okay";
>>> +       };
>>> +
>>> +       sata-phy at 12170000 {
>>> +               status = "okay";
>>> +               samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
>>> +       };

Ditto.

Best regards,
Tomasz