Re: [PATCH kernel v3 05/22] powerpc/powernv/npu: Add helper to access struct npu for NPU device

[Alistair Popple <alistair@popple.id.au>]

Reviewed-by: Alistair Popple <alistair@popple.id.au>

On Tuesday, 13 November 2018 7:28:06 PM AEDT Alexey Kardashevskiy wrote:
> This step is to help removing the npu struct from pnv_phb so it
> can be used by pseries as well.
> 
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
> ---
>  arch/powerpc/platforms/powernv/npu-dma.c | 22 ++++++++++++++++------
>  1 file changed, 16 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/powernv/npu-dma.c
> b/arch/powerpc/platforms/powernv/npu-dma.c index 91d488f..9f48831 100644
> --- a/arch/powerpc/platforms/powernv/npu-dma.c
> +++ b/arch/powerpc/platforms/powernv/npu-dma.c
> @@ -327,6 +327,18 @@ struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct
> pnv_ioda_pe *npe) return gpe;
>  }
> 
> +/*
> + * NPU2 ATS
> + */
> +static struct npu *npdev_to_npu(struct pci_dev *npdev)
> +{
> +	struct pnv_phb *nphb;
> +
> +	nphb = pci_bus_to_host(npdev->bus)->private_data;
> +
> +	return &nphb->npu;
> +}
> +
>  /* Maximum number of nvlinks per npu */
>  #define NV_MAX_LINKS 6
> 
> @@ -478,7 +490,6 @@ static void acquire_atsd_reg(struct npu_context
> *npu_context, int i, j;
>  	struct npu *npu;
>  	struct pci_dev *npdev;
> -	struct pnv_phb *nphb;
> 
>  	for (i = 0; i <= max_npu2_index; i++) {
>  		mmio_atsd_reg[i].reg = -1;
> @@ -493,8 +504,7 @@ static void acquire_atsd_reg(struct npu_context
> *npu_context, if (!npdev)
>  				continue;
> 
> -			nphb = pci_bus_to_host(npdev->bus)->private_data;
> -			npu = &nphb->npu;
> +			npu = npdev_to_npu(npdev);
>  			mmio_atsd_reg[i].npu = npu;
>  			mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
>  			while (mmio_atsd_reg[i].reg < 0) {
> @@ -690,7 +700,7 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev
> *gpdev, }
> 
>  	nphb = pci_bus_to_host(npdev->bus)->private_data;
> -	npu = &nphb->npu;
> +	npu = npdev_to_npu(npdev);
> 
>  	/*
>  	 * Setup the NPU context table for a particular GPU. These need to be
> @@ -764,7 +774,7 @@ struct npu_context *pnv_npu2_init_context(struct pci_dev
> *gpdev, */
>  	WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], npdev);
> 
> -	if (!nphb->npu.nmmu_flush) {
> +	if (!npu->nmmu_flush) {
>  		/*
>  		 * If we're not explicitly flushing ourselves we need to mark
>  		 * the thread for global flushes
> @@ -810,7 +820,7 @@ void pnv_npu2_destroy_context(struct npu_context
> *npu_context, return;
> 
>  	nphb = pci_bus_to_host(npdev->bus)->private_data;
> -	npu = &nphb->npu;
> +	npu = npdev_to_npu(npdev);
>  	nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
>  	if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
>  							&nvlink_index)))