[PATCH 1/3] Documentation: add Device tree bindings for Hisilicon hip04 ethernet

[sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)]

Hello.

On 18-03-2014 12:40, Zhangfei Gao wrote:

> This patch adds the Device Tree bindings for the Hisilicon hip04
> Ethernet controller, including 100M / 1000M controller.

> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> ---
>   .../bindings/net/hisilicon-hip04-net.txt           |   74 ++++++++++++++++++++
>   1 file changed, 74 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt

> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
> new file mode 100644
> index 0000000..c918f08
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
> @@ -0,0 +1,74 @@
> +Hisilicon hip04 Ethernet Controller
> +
> +* Ethernet controller node
> +
> +Required properties:
> +- compatible: should be "hisilicon,hip04-mac".
> +- reg: address and length of the register set for the device.
> +- interrupts: interrupt for the device.
> +- port: ppe port number connected to the controller: range from 0 to 31.
> +- speed: 100 (100M) or 1000 (1000M).

    There's standard "max-speed" property for that, see 
Documentation/devicetree/bindings/net/ethernet.txt in the 'net-next.git' repo.

> +Optional Properties:
> +- phy-handle : the phandle to a PHY node

    Please refer instead to the above mentioned file for this standard 
property -- it is already described there. See other binding files as the example.

WBR, Sergei