[PATCH 0/2] Lager & Koelsch: Set ethernet PHY LED mode

[PATCH 0/2] Lager & Koelsch: Set ethernet PHY LED mode

[Laurent Pinchart]

Hello,

These two patches set the ethernet PHY LED mode to output etherner link status
on LED0 for the Lager and Koelsch board.

Both have a runtime dependency on "sh_eth: update OF PHY registeration" and
"phy: micrel: add of configuration for LED mode" (scheduled for merge in v3.15)
to have any effect. Without those dependencies the led-mode property will be
ignored. The patches can thus be merged separately.

Ben, I haven't seen similar patches being posted to the linux-sh mailing list,
but I might have missed them. I apologize if that's the case.

Laurent Pinchart (2):
  ARM: shmobile: lager: Set ethernet PHY LED mode
  ARM: shmobile: koelsch: Set ethernet PHY LED mode

 arch/arm/boot/dts/r8a7790-lager.dts   | 1 +
 arch/arm/boot/dts/r8a7791-koelsch.dts | 1 +
 2 files changed, 2 insertions(+)

-- 
Regards,

Laurent Pinchart

Re: [PATCH 0/2] Lager & Koelsch: Set ethernet PHY LED mode

[Ben Dooks]

On 18/03/14 19:04, Laurent Pinchart wrote:
> Hello,
>
> These two patches set the ethernet PHY LED mode to output etherner link status
> on LED0 for the Lager and Koelsch board.
>
> Both have a runtime dependency on "sh_eth: update OF PHY registeration" and
> "phy: micrel: add of configuration for LED mode" (scheduled for merge in v3.15)
> to have any effect. Without those dependencies the led-mode property will be
> ignored. The patches can thus be merged separately.
>
> Ben, I haven't seen similar patches being posted to the linux-sh mailing list,
> but I might have missed them. I apologize if that's the case.

It is entirely possible they have been missed, there is so much
outstanding at the moment that it is easy to miss the odd patch :/


-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

Re: [PATCH 0/2] Lager & Koelsch: Set ethernet PHY LED mode

[Simon Horman]

On Wed, Mar 19, 2014 at 09:23:31AM +0100, Ben Dooks wrote:
> On 18/03/14 19:04, Laurent Pinchart wrote:
> >Hello,
> >
> >These two patches set the ethernet PHY LED mode to output etherner link status
> >on LED0 for the Lager and Koelsch board.
> >
> >Both have a runtime dependency on "sh_eth: update OF PHY registeration" and
> >"phy: micrel: add of configuration for LED mode" (scheduled for merge in v3.15)
> >to have any effect. Without those dependencies the led-mode property will be
> >ignored. The patches can thus be merged separately.
> >
> >Ben, I haven't seen similar patches being posted to the linux-sh mailing list,
> >but I might have missed them. I apologize if that's the case.
> 
> It is entirely possible they have been missed, there is so much
> outstanding at the moment that it is easy to miss the odd patch :/

Thanks, I will queue up this series.