All of lore.kernel.org
 help / color / mirror / Atom feed
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] ARM: berlin/dt: add cpupll and syspll support to BG2
Date: Fri, 21 Mar 2014 13:13:52 +0100	[thread overview]
Message-ID: <532C2D00.2080508@gmail.com> (raw)
In-Reply-To: <1395402220-23503-6-git-send-email-alexandre.belloni@free-electrons.com>

On 03/21/2014 12:43 PM, Alexandre Belloni wrote:
> This also moves the clocks from the clocks container node to the root.

Same comments as for patch 4/5.

> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>   arch/arm/boot/dts/berlin2.dtsi | 56 +++++++++++++++++++++++++++++-------------
>   1 file changed, 39 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
> index 56a1af2f1052..4b82076ef1ed 100644
> --- a/arch/arm/boot/dts/berlin2.dtsi
> +++ b/arch/arm/boot/dts/berlin2.dtsi
> @@ -37,24 +37,46 @@
>   		};
>   	};
>
> -	clocks {
> -		smclk: sysmgr-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <25000000>;
> -		};
> +	smclk: sysmgr-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
>
> -		cfgclk: cfg-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <100000000>;
> -		};
> +	cfgclk: cfg-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <100000000>;
> +	};
>
> -		sysclk: system-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <400000000>;
> -		};
> +	syspll: syspll {
> +		compatible = "marvell,berlin2-pll";
> +		clocks = <&smclk>;
> +		#clock-cells = <0>;
> +		reg = <0xf7ea0014 8>;
> +	};
> +
> +	cpupll: cpupll {
> +		compatible = "marvell,berlin2-pll";
> +		clocks = <&smclk>;
> +		#clock-cells = <0>;
> +		reg = <0xf7ea003c 8>;
> +	};
> +
> +	cpuclk: cpu-clock {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&cpupll>;
> +		#clock-cells = <0>;
> +		clock-div = <1>;
> +		clock-mult = <1>;
> +	};
> +
> +	twdclk: twdclk {
> +		compatible = "fixed-factor-clock";
> +		#clock-cells = <0>;
> +		clocks = <&cpuclk>;
> +		clock-mult = <1>;
> +		clock-div = <3>;
>   	};
>
>   	soc {
> @@ -83,7 +105,7 @@
>   			compatible = "arm,cortex-a9-twd-timer";
>   			reg = <0xad0600 0x20>;
>   			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&sysclk>;
> +			clocks = <&twdclk>;
>   		};
>
>   		apb at e80000 {
>

WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	Mike Turquette <mturquette@linaro.org>
Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	"Antoine Ténart" <antoine.tenart@free-electrons.com>
Subject: Re: [PATCH 5/5] ARM: berlin/dt: add cpupll and syspll support to BG2
Date: Fri, 21 Mar 2014 13:13:52 +0100	[thread overview]
Message-ID: <532C2D00.2080508@gmail.com> (raw)
In-Reply-To: <1395402220-23503-6-git-send-email-alexandre.belloni@free-electrons.com>

On 03/21/2014 12:43 PM, Alexandre Belloni wrote:
> This also moves the clocks from the clocks container node to the root.

Same comments as for patch 4/5.

> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>   arch/arm/boot/dts/berlin2.dtsi | 56 +++++++++++++++++++++++++++++-------------
>   1 file changed, 39 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
> index 56a1af2f1052..4b82076ef1ed 100644
> --- a/arch/arm/boot/dts/berlin2.dtsi
> +++ b/arch/arm/boot/dts/berlin2.dtsi
> @@ -37,24 +37,46 @@
>   		};
>   	};
>
> -	clocks {
> -		smclk: sysmgr-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <25000000>;
> -		};
> +	smclk: sysmgr-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
>
> -		cfgclk: cfg-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <100000000>;
> -		};
> +	cfgclk: cfg-clock {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <100000000>;
> +	};
>
> -		sysclk: system-clock {
> -			compatible = "fixed-clock";
> -			#clock-cells = <0>;
> -			clock-frequency = <400000000>;
> -		};
> +	syspll: syspll {
> +		compatible = "marvell,berlin2-pll";
> +		clocks = <&smclk>;
> +		#clock-cells = <0>;
> +		reg = <0xf7ea0014 8>;
> +	};
> +
> +	cpupll: cpupll {
> +		compatible = "marvell,berlin2-pll";
> +		clocks = <&smclk>;
> +		#clock-cells = <0>;
> +		reg = <0xf7ea003c 8>;
> +	};
> +
> +	cpuclk: cpu-clock {
> +		compatible = "fixed-factor-clock";
> +		clocks = <&cpupll>;
> +		#clock-cells = <0>;
> +		clock-div = <1>;
> +		clock-mult = <1>;
> +	};
> +
> +	twdclk: twdclk {
> +		compatible = "fixed-factor-clock";
> +		#clock-cells = <0>;
> +		clocks = <&cpuclk>;
> +		clock-mult = <1>;
> +		clock-div = <3>;
>   	};
>
>   	soc {
> @@ -83,7 +105,7 @@
>   			compatible = "arm,cortex-a9-twd-timer";
>   			reg = <0xad0600 0x20>;
>   			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&sysclk>;
> +			clocks = <&twdclk>;
>   		};
>
>   		apb@e80000 {
>


  reply	other threads:[~2014-03-21 12:13 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-21 11:43 [PATCH 0/5] berlin: initial support for the clocks Alexandre Belloni
2014-03-21 11:43 ` Alexandre Belloni
2014-03-21 11:43 ` [PATCH 1/5] clk: berlin: add support for berlin plls Alexandre Belloni
2014-03-21 11:43   ` Alexandre Belloni
2014-03-21 12:49   ` Sebastian Hesselbarth
2014-03-21 12:49     ` Sebastian Hesselbarth
2014-03-21 15:45     ` Alexandre Belloni
2014-03-21 15:45       ` Alexandre Belloni
2014-03-21 15:58       ` Alexandre Belloni
2014-03-21 15:58         ` Alexandre Belloni
2014-03-21 16:03       ` Sebastian Hesselbarth
2014-03-21 16:03         ` Sebastian Hesselbarth
2014-03-21 16:01         ` Alexandre Belloni
2014-03-21 16:01           ` Alexandre Belloni
2014-03-21 15:56     ` Alexandre Belloni
2014-03-21 15:56       ` Alexandre Belloni
2014-03-21 16:04       ` Sebastian Hesselbarth
2014-03-21 16:04         ` Sebastian Hesselbarth
2014-03-21 11:43 ` [PATCH 2/5] clk: berlin: add berlin clocks DT bindings documentation Alexandre Belloni
2014-03-21 11:43   ` Alexandre Belloni
2014-03-21 11:43   ` Alexandre Belloni
2014-03-21 11:53   ` Mark Rutland
2014-03-21 11:53     ` Mark Rutland
2014-03-21 12:16   ` Sebastian Hesselbarth
2014-03-21 12:16     ` Sebastian Hesselbarth
2014-03-21 11:43 ` [PATCH 3/5] ARM: berlin/dt: add cpupll and syspll support to BG2Q Alexandre Belloni
2014-03-21 11:43   ` Alexandre Belloni
2014-03-21 12:11   ` Sebastian Hesselbarth
2014-03-21 12:11     ` Sebastian Hesselbarth
2014-03-21 12:17     ` Alexandre Belloni
2014-03-21 12:17       ` Alexandre Belloni
2014-03-21 12:29       ` Sebastian Hesselbarth
2014-03-21 12:29         ` Sebastian Hesselbarth
2014-03-21 14:54         ` Alexandre Belloni
2014-03-21 14:54           ` Alexandre Belloni
2014-03-21 11:43 ` [PATCH 4/5] ARM: berlin/dt: add cpupll and syspll support to BG2CD Alexandre Belloni
2014-03-21 11:43   ` Alexandre Belloni
2014-03-21 12:13   ` Sebastian Hesselbarth
2014-03-21 12:13     ` Sebastian Hesselbarth
2014-03-21 11:43 ` [PATCH 5/5] ARM: berlin/dt: add cpupll and syspll support to BG2 Alexandre Belloni
2014-03-21 11:43   ` Alexandre Belloni
2014-03-21 12:13   ` Sebastian Hesselbarth [this message]
2014-03-21 12:13     ` Sebastian Hesselbarth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=532C2D00.2080508@gmail.com \
    --to=sebastian.hesselbarth@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.