Re: [PATCH regression] net: phy: fix initialization (config_init) for Marvel 88E1116R PHYs

[Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>]

On 04/02/2014 09:01 PM, Florian Fainelli wrote:
> 2014-04-02 2:09 GMT-07:00 Alexander Holler <holler@ahsoftware.de>:
>> Am 02.04.2014 02:57, schrieb Florian Fainelli:
>>> 2014-04-01 16:55 GMT-07:00 Alexander Holler <holler@ahsoftware.de>:
>>>> Commit 7cd1463664c2a15721ff4ccfb61d4d970815cb3d (introduced with 3.14)
>>>> changed the initialization of the mv643xx_eth driver to use phy_init_hw()
>>>> to reset the PHY. Unfortunately the initialization for the 88E1116R PHY
>>>> was broken such, that it used mdelay() instead of really waiting for a
>>>> reset to finish.
>
> Can you resubmit with the following information:
> 
> - you specify the commit that introduce the problem in parenthesis,
> e.g: deadbeef ("dead: beef: cafe babe")
> - put this dmesg snippet in your log message to clearly illustrate
> what is happening
> - clarify that the PHY needs to be polled in a comment in
> m88e1116r_config_init()
> 
> Meanwhile, it would be good if someone with access to this particular
> PHY datasheet could look for known erratas, problems, non-standard
> compliant behavior ....

Alexander,

I tried todays linux/master on Seagate Dockstar with Marvell 88E1116R
(0x01410e40) and cannot reproduce any regression. I tried booting from
tftp and usb, I also rebooted twice to see if there are any side
effects - nothing - ethernet always comes up as expected.

I am curious, how you determined above commit to be the cause of the
regression you are seeing. Can you bisect, if you didn't already?

Sebastian