Re: [PATCH regression] net: phy: fix initialization (config_init) for Marvel 88E1116R PHYs

[Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>]

On 04/03/2014 05:06 PM, Alexander Holler wrote:
> Am 03.04.2014 10:49, schrieb Sebastian Hesselbarth:
>> On 04/03/2014 09:17 AM, Alexander Holler wrote:
>>> Am 03.04.2014 00:27, schrieb Sebastian Hesselbarth:
>>>> On 04/03/2014 12:12 AM, Alexander Holler wrote:
>>>>>> I am curious, how you determined above commit to be the cause of the
>>>>>> regression you are seeing. Can you bisect, if you didn't already?
>>>>>
>>>>> There was no bisecting necessary. I've just looked at what changed in
>>>>> mv643xx_eth since 3.13 and the first commit I've reverted was
>>>>> already a
>>>>> hit. Reading a bit source revealed the differences between the old
>>>>> reset
>>>>> and the newly used one and ended up with my patch (first try) and
>>>>> was a
>>>>> hit too.
>>>>
> 
> Sorry, continuing this discussion doesn't make sense. You have the same
> hw, so just try enabling netconsole with 3.14 and use dhcpcd from
> userland (this does the final reset here which hangs.
> 
> But don't suggest me (or insist on) a time consuming and totally useless
> bisect when I already know what makes the problem to appear (100%
> reliable here).

Alexander,

I tried to reproduce the regression on Dockstar with 3.14.0 and
3.14.0-07247-gcd6362be, netconsole enabled, DHCP (dhclient).

I can neither reproduce any issues with ethernet before nor after
dhclient kicks in. I can also use netconsole just fine and see
plenty of kernel bootlog messages sent to netconsole receiver.

Can you _please_ share a full report how to properly reproduce it?

Sebastian