* [PATCH 0/1] useradd_base.bbclass: sleep more and more seconds (up to 10)
@ 2014-04-03 9:59 Robert Yang
2014-04-03 9:59 ` [PATCH 1/1] " Robert Yang
0 siblings, 1 reply; 4+ messages in thread
From: Robert Yang @ 2014-04-03 9:59 UTC (permalink / raw)
To: openembedded-core
The following changes since commit c1ba851727a9c0d2c075f2fba7980913280e84da:
gtk+3: set proper FLAGS for native (2014-04-03 17:27:18 +0800)
are available in the git repository at:
git://git.openembedded.org/openembedded-core-contrib rbt/sleep
http://cgit.openembedded.org/cgit.cgi/openembedded-core-contrib/log/?h=rbt/sleep
Robert Yang (1):
useradd_base.bbclass: sleep more and more seconds (up to 10)
meta/classes/useradd_base.bbclass | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--
1.8.3.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 1/1] useradd_base.bbclass: sleep more and more seconds (up to 10)
2014-04-03 9:59 [PATCH 0/1] useradd_base.bbclass: sleep more and more seconds (up to 10) Robert Yang
@ 2014-04-03 9:59 ` Robert Yang
2014-04-03 20:42 ` Saul Wold
0 siblings, 1 reply; 4+ messages in thread
From: Robert Yang @ 2014-04-03 9:59 UTC (permalink / raw)
To: openembedded-core
Currently, it would sleep 1 second when fail to add the user, this maybe
not enough when we use the sstate cache, as my test shows below, nearly
all the useradd actions are doing in the same minute when mirror from
ssate cache, and it would fail when the load is high, I got these time
by adding strace before the useradd for debugging:
2014-03-31 14:48:22.978079781 +0800 /tmp/log/pulseaudio.4.c
2014-03-31 14:48:22.028079813 +0800 /tmp/log/pulseaudio.1.c
2014-03-31 14:48:21.949079816 +0800 /tmp/log/pulseaudio.3.c
2014-03-31 14:48:20.903079852 +0800 /tmp/log/pulseaudio.2.c
2014-03-31 14:48:20.006079883 +0800 /tmp/log/nfs-utils.9.c
2014-03-31 14:48:18.876079923 +0800 /tmp/log/xuser-account.9.c
2014-03-31 14:48:18.824079924 +0800 /tmp/log/pulseaudio.0.c
2014-03-31 14:48:17.826079959 +0800 /tmp/log/xuser-account.8.c
2014-03-31 14:48:17.766079961 +0800 /tmp/log/nfs-utils.8.c
2014-03-31 14:48:16.794079995 +0800 /tmp/log/xuser-account.7.c
2014-03-31 14:48:16.735079997 +0800 /tmp/log/nfs-utils.7.c
2014-03-31 14:48:14.719080066 +0800 /tmp/log/xuser-account.5.c
2014-03-31 14:48:14.677080068 +0800 /tmp/log/nfs-utils.5.c
2014-03-31 14:48:12.621080139 +0800 /tmp/log/nfs-utils.3.c
2014-03-31 14:48:11.589080175 +0800 /tmp/log/nfs-utils.2.c
2014-03-31 14:48:10.242080221 +0800 /tmp/log/builder.0.c
2014-03-31 14:48:09.523080246 +0800 /tmp/log/nfs-utils.0.c
2014-03-31 14:48:09.488080248 +0800 /tmp/log/openssh.0.c
2014-03-31 14:48:09.485080248 +0800 /tmp/log/rpcbind.1.c
2014-03-31 14:48:07.590080313 +0800 /tmp/log/rpcbind.0.c
2014-03-31 14:28:15.437121590 +0800 /tmp/log/avahi.0.c
2014-03-31 14:18:19.067142238 +0800 /tmp/log/dbus.0.c
The nfs-utils and xuser-account are failed to add the user.
The useradd command needs two locks, passwd.lock and group.lock, it may
get one, but can't get another one if we look into these .c files, sleep
1 second is not enough, it needs more seconds, the reason is that, if
succeed, it doesn't have any side effects, if failed, we need wait for
more seconds rather than make it more crowding.
I've tried to use "sleep 5", but it didn't make much better since they
would sleep and wake up nearly at the same time, I also tried to use
"sleep <RANDOM seconds between 1 and 10>", that didn't make much better
,either.
I think that a better ways is sleep more and more seconds (up to 10
seconds) when failed, this can't fix the problem that they may do the
actions at the same time, but the logic is: if it is not crowding, sleep
less time should be OK, otherwise sleep more and more time.
Here is the testing result which seems much better:
2014-04-03 14:09:56.605185284 +0800 dbus.0.c
2014-04-03 14:09:39.899185862 +0800 rpcbind.5.c
2014-04-03 14:09:38.400185914 +0800 distcc.4.c
2014-04-03 14:09:35.206186025 +0800 pulseaudio.1.c
2014-04-03 14:09:33.979186067 +0800 rpcbind.4.c
2014-04-03 14:09:33.364186089 +0800 pulseaudio.0.c
2014-04-03 14:09:33.360186089 +0800 distcc.3.c
2014-04-03 14:09:30.996186171 +0800 avahi-ui.0.c
2014-04-03 14:09:30.298186195 +0800 distcc.2.c
2014-04-03 14:09:29.905186208 +0800 rpcbind.3.c
2014-04-03 14:09:29.410186226 +0800 avahi-ui.2.c
2014-04-03 14:09:28.239186266 +0800 distcc.1.c
2014-04-03 14:09:27.298186299 +0800 xuser-account.0.c
2014-04-03 14:09:27.032186308 +0800 distcc.0.c
2014-04-03 14:09:26.836186315 +0800 rpcbind.2.c
2014-04-03 14:09:25.846186349 +0800 nfs-utils.1.c
2014-04-03 14:09:25.752186352 +0800 avahi-ui.1.c
2014-04-03 14:09:24.779186386 +0800 builder.0.c
2014-04-03 14:09:24.746186387 +0800 rpcbind.1.c
2014-04-03 14:09:23.916186416 +0800 openssh.1.c
2014-04-03 14:09:23.848186418 +0800 nfs-utils.0.c
2014-04-03 14:09:23.594186427 +0800 rpcbind.0.c
2014-04-03 14:09:22.609186461 +0800 ppp-dialin.0.c
2014-04-03 14:09:21.817186488 +0800 openssh.0.c
[YOCTO #6085]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/classes/useradd_base.bbclass | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/meta/classes/useradd_base.bbclass b/meta/classes/useradd_base.bbclass
index 7aafe29..01d2e99 100644
--- a/meta/classes/useradd_base.bbclass
+++ b/meta/classes/useradd_base.bbclass
@@ -24,7 +24,7 @@ perform_groupadd () {
group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
if test "x$group_exists" = "x"; then
bbwarn "groupadd command did not succeed. Retrying..."
- sleep 1
+ sleep `expr $count + 1`
else
break
fi
@@ -52,7 +52,7 @@ perform_useradd () {
user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
if test "x$user_exists" = "x"; then
bbwarn "useradd command did not succeed. Retrying..."
- sleep 1
+ sleep `expr $count + 1`
else
break
fi
@@ -90,7 +90,7 @@ perform_groupmems () {
mem_exists="`grep "^$groupname:[^:]*:[^:]*:\([^,]*,\)*$username\(,[^,]*\)*" $rootdir/etc/group || true`"
if test "x$mem_exists" = "x"; then
bbwarn "groupmems command did not succeed. Retrying..."
- sleep 1
+ sleep `expr $count + 1`
else
break
fi
@@ -126,7 +126,7 @@ perform_groupdel () {
group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
if test "x$group_exists" != "x"; then
bbwarn "groupdel command did not succeed. Retrying..."
- sleep 1
+ sleep `expr $count + 1`
else
break
fi
@@ -154,7 +154,7 @@ perform_userdel () {
user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
if test "x$user_exists" != "x"; then
bbwarn "userdel command did not succeed. Retrying..."
- sleep 1
+ sleep `expr $count + 1`
else
break
fi
@@ -184,7 +184,7 @@ perform_groupmod () {
eval $PSEUDO groupmod $opts
if test $? != 0; then
bbwarn "groupmod command did not succeed. Retrying..."
- sleep 1
+ sleep `expr $count + 1`
else
break
fi
@@ -214,7 +214,7 @@ perform_usermod () {
eval $PSEUDO usermod $opts
if test $? != 0; then
bbwarn "usermod command did not succeed. Retrying..."
- sleep 1
+ sleep `expr $count + 1`
else
break
fi
--
1.8.3.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/1] useradd_base.bbclass: sleep more and more seconds (up to 10)
2014-04-03 9:59 ` [PATCH 1/1] " Robert Yang
@ 2014-04-03 20:42 ` Saul Wold
2014-04-04 7:33 ` Robert Yang
0 siblings, 1 reply; 4+ messages in thread
From: Saul Wold @ 2014-04-03 20:42 UTC (permalink / raw)
To: Robert Yang, openembedded-core
On 04/03/2014 02:59 AM, Robert Yang wrote:
> Currently, it would sleep 1 second when fail to add the user, this maybe
> not enough when we use the sstate cache, as my test shows below, nearly
> all the useradd actions are doing in the same minute when mirror from
> ssate cache, and it would fail when the load is high, I got these time
> by adding strace before the useradd for debugging:
>
> 2014-03-31 14:48:22.978079781 +0800 /tmp/log/pulseaudio.4.c
> 2014-03-31 14:48:22.028079813 +0800 /tmp/log/pulseaudio.1.c
> 2014-03-31 14:48:21.949079816 +0800 /tmp/log/pulseaudio.3.c
> 2014-03-31 14:48:20.903079852 +0800 /tmp/log/pulseaudio.2.c
> 2014-03-31 14:48:20.006079883 +0800 /tmp/log/nfs-utils.9.c
> 2014-03-31 14:48:18.876079923 +0800 /tmp/log/xuser-account.9.c
> 2014-03-31 14:48:18.824079924 +0800 /tmp/log/pulseaudio.0.c
> 2014-03-31 14:48:17.826079959 +0800 /tmp/log/xuser-account.8.c
> 2014-03-31 14:48:17.766079961 +0800 /tmp/log/nfs-utils.8.c
> 2014-03-31 14:48:16.794079995 +0800 /tmp/log/xuser-account.7.c
> 2014-03-31 14:48:16.735079997 +0800 /tmp/log/nfs-utils.7.c
> 2014-03-31 14:48:14.719080066 +0800 /tmp/log/xuser-account.5.c
> 2014-03-31 14:48:14.677080068 +0800 /tmp/log/nfs-utils.5.c
> 2014-03-31 14:48:12.621080139 +0800 /tmp/log/nfs-utils.3.c
> 2014-03-31 14:48:11.589080175 +0800 /tmp/log/nfs-utils.2.c
> 2014-03-31 14:48:10.242080221 +0800 /tmp/log/builder.0.c
> 2014-03-31 14:48:09.523080246 +0800 /tmp/log/nfs-utils.0.c
> 2014-03-31 14:48:09.488080248 +0800 /tmp/log/openssh.0.c
> 2014-03-31 14:48:09.485080248 +0800 /tmp/log/rpcbind.1.c
> 2014-03-31 14:48:07.590080313 +0800 /tmp/log/rpcbind.0.c
> 2014-03-31 14:28:15.437121590 +0800 /tmp/log/avahi.0.c
> 2014-03-31 14:18:19.067142238 +0800 /tmp/log/dbus.0.c
>
> The nfs-utils and xuser-account are failed to add the user.
>
> The useradd command needs two locks, passwd.lock and group.lock, it may
> get one, but can't get another one if we look into these .c files, sleep
> 1 second is not enough, it needs more seconds, the reason is that, if
> succeed, it doesn't have any side effects, if failed, we need wait for
> more seconds rather than make it more crowding.
>
> I've tried to use "sleep 5", but it didn't make much better since they
> would sleep and wake up nearly at the same time, I also tried to use
> "sleep <RANDOM seconds between 1 and 10>", that didn't make much better
> ,either.
>
> I think that a better ways is sleep more and more seconds (up to 10
> seconds) when failed, this can't fix the problem that they may do the
> actions at the same time, but the logic is: if it is not crowding, sleep
> less time should be OK, otherwise sleep more and more time.
>
> Here is the testing result which seems much better:
> 2014-04-03 14:09:56.605185284 +0800 dbus.0.c
> 2014-04-03 14:09:39.899185862 +0800 rpcbind.5.c
> 2014-04-03 14:09:38.400185914 +0800 distcc.4.c
> 2014-04-03 14:09:35.206186025 +0800 pulseaudio.1.c
> 2014-04-03 14:09:33.979186067 +0800 rpcbind.4.c
> 2014-04-03 14:09:33.364186089 +0800 pulseaudio.0.c
> 2014-04-03 14:09:33.360186089 +0800 distcc.3.c
> 2014-04-03 14:09:30.996186171 +0800 avahi-ui.0.c
> 2014-04-03 14:09:30.298186195 +0800 distcc.2.c
> 2014-04-03 14:09:29.905186208 +0800 rpcbind.3.c
> 2014-04-03 14:09:29.410186226 +0800 avahi-ui.2.c
> 2014-04-03 14:09:28.239186266 +0800 distcc.1.c
> 2014-04-03 14:09:27.298186299 +0800 xuser-account.0.c
> 2014-04-03 14:09:27.032186308 +0800 distcc.0.c
> 2014-04-03 14:09:26.836186315 +0800 rpcbind.2.c
> 2014-04-03 14:09:25.846186349 +0800 nfs-utils.1.c
> 2014-04-03 14:09:25.752186352 +0800 avahi-ui.1.c
> 2014-04-03 14:09:24.779186386 +0800 builder.0.c
> 2014-04-03 14:09:24.746186387 +0800 rpcbind.1.c
> 2014-04-03 14:09:23.916186416 +0800 openssh.1.c
> 2014-04-03 14:09:23.848186418 +0800 nfs-utils.0.c
> 2014-04-03 14:09:23.594186427 +0800 rpcbind.0.c
> 2014-04-03 14:09:22.609186461 +0800 ppp-dialin.0.c
> 2014-04-03 14:09:21.817186488 +0800 openssh.0.c
>
> [YOCTO #6085]
>
> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
> ---
> meta/classes/useradd_base.bbclass | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/meta/classes/useradd_base.bbclass b/meta/classes/useradd_base.bbclass
> index 7aafe29..01d2e99 100644
> --- a/meta/classes/useradd_base.bbclass
> +++ b/meta/classes/useradd_base.bbclass
> @@ -24,7 +24,7 @@ perform_groupadd () {
> group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
> if test "x$group_exists" = "x"; then
> bbwarn "groupadd command did not succeed. Retrying..."
> - sleep 1
> + sleep `expr $count + 1`
Why not move the count assignment that is below the fi (not visible in
this diff) to above the test and then check for count > retries, this
will save one call to expr.
Sau!
> else
> break
> fi
> @@ -52,7 +52,7 @@ perform_useradd () {
> user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
> if test "x$user_exists" = "x"; then
> bbwarn "useradd command did not succeed. Retrying..."
> - sleep 1
> + sleep `expr $count + 1`
> else
> break
> fi
> @@ -90,7 +90,7 @@ perform_groupmems () {
> mem_exists="`grep "^$groupname:[^:]*:[^:]*:\([^,]*,\)*$username\(,[^,]*\)*" $rootdir/etc/group || true`"
> if test "x$mem_exists" = "x"; then
> bbwarn "groupmems command did not succeed. Retrying..."
> - sleep 1
> + sleep `expr $count + 1`
> else
> break
> fi
> @@ -126,7 +126,7 @@ perform_groupdel () {
> group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
> if test "x$group_exists" != "x"; then
> bbwarn "groupdel command did not succeed. Retrying..."
> - sleep 1
> + sleep `expr $count + 1`
> else
> break
> fi
> @@ -154,7 +154,7 @@ perform_userdel () {
> user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
> if test "x$user_exists" != "x"; then
> bbwarn "userdel command did not succeed. Retrying..."
> - sleep 1
> + sleep `expr $count + 1`
> else
> break
> fi
> @@ -184,7 +184,7 @@ perform_groupmod () {
> eval $PSEUDO groupmod $opts
> if test $? != 0; then
> bbwarn "groupmod command did not succeed. Retrying..."
> - sleep 1
> + sleep `expr $count + 1`
> else
> break
> fi
> @@ -214,7 +214,7 @@ perform_usermod () {
> eval $PSEUDO usermod $opts
> if test $? != 0; then
> bbwarn "usermod command did not succeed. Retrying..."
> - sleep 1
> + sleep `expr $count + 1`
> else
> break
> fi
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/1] useradd_base.bbclass: sleep more and more seconds (up to 10)
2014-04-03 20:42 ` Saul Wold
@ 2014-04-04 7:33 ` Robert Yang
0 siblings, 0 replies; 4+ messages in thread
From: Robert Yang @ 2014-04-04 7:33 UTC (permalink / raw)
To: Saul Wold, openembedded-core
On 04/04/2014 04:42 AM, Saul Wold wrote:
> On 04/03/2014 02:59 AM, Robert Yang wrote:
>>
>> Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
>> ---
>> meta/classes/useradd_base.bbclass | 14 +++++++-------
>> 1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/meta/classes/useradd_base.bbclass
>> b/meta/classes/useradd_base.bbclass
>> index 7aafe29..01d2e99 100644
>> --- a/meta/classes/useradd_base.bbclass
>> +++ b/meta/classes/useradd_base.bbclass
>> @@ -24,7 +24,7 @@ perform_groupadd () {
>> group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
>> if test "x$group_exists" = "x"; then
>> bbwarn "groupadd command did not succeed. Retrying..."
>> - sleep 1
>> + sleep `expr $count + 1`
>
> Why not move the count assignment that is below the fi (not visible in this
> diff) to above the test and then check for count > retries, this will save one
> call to expr.
>
Ah, yes, thanks, we can move the sleep after the bbfatal so that we don't
need the extra "expr" or check count > retries.
Updated:
git://git.openembedded.org/openembedded-core-contrib rbt/sleep
http://cgit.openembedded.org/cgit.cgi/openembedded-core-contrib/log/?h=rbt/sleep
diff --git a/meta/classes/useradd_base.bbclass b/meta/classes/useradd_base.bbclass
index 7aafe29..c47b1eb 100644
--- a/meta/classes/useradd_base.bbclass
+++ b/meta/classes/useradd_base.bbclass
@@ -24,7 +24,6 @@ perform_groupadd () {
group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
if test "x$group_exists" = "x"; then
bbwarn "groupadd command did not succeed. Retrying..."
- sleep 1
else
break
fi
@@ -32,6 +31,7 @@ perform_groupadd () {
if test $count = $retries; then
bbfatal "Tried running groupadd command $retries times without scucess,
giving up"
fi
+ sleep $count
done
else
bbwarn "group $groupname already exists, not re-creating it"
@@ -52,7 +52,6 @@ perform_useradd () {
user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
if test "x$user_exists" = "x"; then
bbwarn "useradd command did not succeed. Retrying..."
- sleep 1
else
break
fi
@@ -60,6 +59,7 @@ perform_useradd () {
if test $count = $retries; then
bbfatal "Tried running useradd command $retries times without scucess,
giving up"
fi
+ sleep $count
done
else
bbwarn "user $username already exists, not re-creating it"
@@ -90,7 +90,6 @@ perform_groupmems () {
mem_exists="`grep "^$groupname:[^:]*:[^:]*:\([^,]*,\)*$username\(,[^,]*\)*"
$rootdir/etc/group || true`"
if test "x$mem_exists" = "x"; then
bbwarn "groupmems command did not succeed. Retrying..."
- sleep 1
else
break
fi
@@ -102,6 +101,7 @@ perform_groupmems () {
fi
bbfatal "Tried running groupmems command $retries times without scucess,
giving up"
fi
+ sleep $count
done
else
bbwarn "group $groupname already contains $username, not re-adding it"
@@ -126,7 +126,6 @@ perform_groupdel () {
group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
if test "x$group_exists" != "x"; then
bbwarn "groupdel command did not succeed. Retrying..."
- sleep 1
else
break
fi
@@ -134,6 +133,7 @@ perform_groupdel () {
if test $count = $retries; then
bbfatal "Tried running groupdel command $retries times without scucess,
giving up"
fi
+ sleep $count
done
else
bbwarn "group $groupname doesn't exist, not removing it"
@@ -154,7 +154,6 @@ perform_userdel () {
user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
if test "x$user_exists" != "x"; then
bbwarn "userdel command did not succeed. Retrying..."
- sleep 1
else
break
fi
@@ -162,6 +161,7 @@ perform_userdel () {
if test $count = $retries; then
bbfatal "Tried running userdel command $retries times without scucess,
giving up"
fi
+ sleep $count
done
else
bbwarn "user $username doesn't exist, not removing it"
@@ -184,7 +184,6 @@ perform_groupmod () {
eval $PSEUDO groupmod $opts
if test $? != 0; then
bbwarn "groupmod command did not succeed. Retrying..."
- sleep 1
else
break
fi
@@ -192,6 +191,7 @@ perform_groupmod () {
if test $count = $retries; then
bbfatal "Tried running groupmod command $retries times without scucess,
giving up"
fi
+ sleep $count
done
else
bbwarn "group $groupname doesn't exist, unable to modify it"
@@ -214,7 +214,6 @@ perform_usermod () {
eval $PSEUDO usermod $opts
if test $? != 0; then
bbwarn "usermod command did not succeed. Retrying..."
- sleep 1
else
break
fi
@@ -222,6 +221,7 @@ perform_usermod () {
if test $count = $retries; then
bbfatal "Tried running usermod command $retries times without scucess,
giving up"
fi
+ sleep $count
done
else
bbwarn "user $username doesn't exist, unable to modify it"
// Robert
> Sau!
>
>> else
>> break
>> fi
>> @@ -52,7 +52,7 @@ perform_useradd () {
>> user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
>> if test "x$user_exists" = "x"; then
>> bbwarn "useradd command did not succeed. Retrying..."
>> - sleep 1
>> + sleep `expr $count + 1`
>> else
>> break
>> fi
>> @@ -90,7 +90,7 @@ perform_groupmems () {
>> mem_exists="`grep
>> "^$groupname:[^:]*:[^:]*:\([^,]*,\)*$username\(,[^,]*\)*" $rootdir/etc/group
>> || true`"
>> if test "x$mem_exists" = "x"; then
>> bbwarn "groupmems command did not succeed. Retrying..."
>> - sleep 1
>> + sleep `expr $count + 1`
>> else
>> break
>> fi
>> @@ -126,7 +126,7 @@ perform_groupdel () {
>> group_exists="`grep "^$groupname:" $rootdir/etc/group || true`"
>> if test "x$group_exists" != "x"; then
>> bbwarn "groupdel command did not succeed. Retrying..."
>> - sleep 1
>> + sleep `expr $count + 1`
>> else
>> break
>> fi
>> @@ -154,7 +154,7 @@ perform_userdel () {
>> user_exists="`grep "^$username:" $rootdir/etc/passwd || true`"
>> if test "x$user_exists" != "x"; then
>> bbwarn "userdel command did not succeed. Retrying..."
>> - sleep 1
>> + sleep `expr $count + 1`
>> else
>> break
>> fi
>> @@ -184,7 +184,7 @@ perform_groupmod () {
>> eval $PSEUDO groupmod $opts
>> if test $? != 0; then
>> bbwarn "groupmod command did not succeed. Retrying..."
>> - sleep 1
>> + sleep `expr $count + 1`
>> else
>> break
>> fi
>> @@ -214,7 +214,7 @@ perform_usermod () {
>> eval $PSEUDO usermod $opts
>> if test $? != 0; then
>> bbwarn "usermod command did not succeed. Retrying..."
>> - sleep 1
>> + sleep `expr $count + 1`
>> else
>> break
>> fi
>>
>
>
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-04-04 7:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-03 9:59 [PATCH 0/1] useradd_base.bbclass: sleep more and more seconds (up to 10) Robert Yang
2014-04-03 9:59 ` [PATCH 1/1] " Robert Yang
2014-04-03 20:42 ` Saul Wold
2014-04-04 7:33 ` Robert Yang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.