Re: [PATCH 00/27] Support new Exynos3250 SoC based on Cortex-A7 dual core

[Chanwoo Choi <cw00.choi@samsung.com>]

Dear all,

Ignore this patchset because this patchset don't include all of patches.
I'll send this patchset again right now.

Sorry for my mistake.

Best Regards,
Chanwoo Choi

On 04/10/2014 06:28 PM, Chanwoo Choi wrote:
> This patchset support new Exynos3250 Samsung SoC based on Cortex-A7 dual core.
> Exynos3250 is a System-On-Chip (SoC) that is based on 32-bit RISC processor
> for Smartphone. It is desigend with the 28nm low-power high-K metal gate process
> and provides the best performance features.
> 
> This patchset include some patches such as:
> - Support secondary CPU of Exynos3250 (cpu up/down)
> - Supoort uart/mct/adc/gic/i2c/spi/power-domain/pmu/mshc/pwm/amba
> - Support the gpio control for Exynos3250 using pinctrl
> - Support the clock control for Exynos3250 using common clk framework
> 
> Chanwoo Choi (11):
>   ARM: EXYNOS: Add Exynos3250 SoC ID
>   ARM: EXYNOS: Add IO mapping for non-secure SYSRAM of Exynos3250
>   ARM: EXYNOS: Add IO mapping for PMU of Exynos3250
>   ARM: EXYNOS: Support secondary CPU boot of Exynos3250
>   ARM: EXYNOS:: Enter a15 lowpower mode for Exynos3250 based on Cortex-a7
>   irqchip: Declare cortex-a7's irqchip to initialize gic from dt
>   ARM: dts: exynos3250: Add default interrupt-parent connected with GIC
>   ARM: dts: exynos3250: Add uart dt node to support seiral ports
>   ARM: dts: exynos3250: Add MCT dt node
>   ARM: dts: exynos3250: Add ADC dt node to read analog raw data
>   ARM: dts: exynos3250: Add CPUs dt node for Exynos3250
> 
> Hyunhee Kim (1):
>   ARM: dts: exynos3250: Add PMU dt data
> 
> Inki Dae (2):
>   ARM: dts: exynos3250: Add i2c dt node
>   ARM: dts: exynos3250: Add power domain dt nodes
> 
> Kyungmin Park (2):
>   ARM: EXYNOS: Support secondary CPU boot of Exynos4212
>   ARM: dts: exynos3250: Add Mobile Storage Host Card
> 
> Tomasz Figa (11):
>   pinctrl: exynos: Add driver data for Exynos3250
>   clk: samsung: exynos3250: Add clocks using common clock framework
>   ARM: dts: exynos3250: Add new exynos3250.dtsi file
>   ARM: dts: exynos3250: Add GIC dt node for Exynos3250
>   ARM: dts: exynos3250: Add pin control device tree data
>   ARM: dts: exynos3250: Add device tree nodes for clock controllers
>   ARM: dts: exynos3250: Move definitions of external clocks to SoC dtsi
>   ARM: dts: exynos3250: Add amba and pdma dt node
>   ARM: dts: exynos3250: Add spi dt node to support spi bus
>   ARM: dts: exynos3250: Add pwm dt node to support PWM Timer
>   ARM: dts: exynos3250: Add RTC dt node
> 
>  arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 ++++++++++++++++++
>  arch/arm/boot/dts/exynos3250.dtsi         | 410 ++++++++++++++++
>  arch/arm/mach-exynos/Kconfig              |  22 +
>  arch/arm/mach-exynos/exynos.c             |  18 +
>  arch/arm/mach-exynos/firmware.c           |  17 +-
>  arch/arm/mach-exynos/hotplug.c            |  13 +-
>  arch/arm/mach-exynos/include/mach/map.h   |   2 +
>  arch/arm/plat-samsung/include/plat/cpu.h  |  10 +
>  drivers/clk/samsung/Makefile              |   1 +
>  drivers/clk/samsung/clk-exynos3250.c      | 785 ++++++++++++++++++++++++++++++
>  drivers/irqchip/irq-gic.c                 |   1 +
>  drivers/pinctrl/pinctrl-exynos.c          |  67 +++
>  drivers/pinctrl/pinctrl-samsung.c         |   2 +
>  drivers/pinctrl/pinctrl-samsung.h         |   1 +
>  include/dt-bindings/clock/exynos3250.h    | 256 ++++++++++
>  15 files changed, 2077 insertions(+), 5 deletions(-)
>  create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi
>  create mode 100644 arch/arm/boot/dts/exynos3250.dtsi
>  create mode 100644 drivers/clk/samsung/clk-exynos3250.c
>  create mode 100644 include/dt-bindings/clock/exynos3250.h
>