From: Jonathan Cameron <jic23@kernel.org>
To: Naveen Krishna Chatradhi <ch.naveen@samsung.com>,
linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
dianders@chromium.org, gregkh@linuxfoundation.org,
naveenkrishna.ch@gmail.com, lars@metafoo.de, cpgs@samsung.com,
grundler@chromium.org, t.figa@samsung.com
Subject: Re: [PATCH 3/5 v3] iio: exynos_adc: reduce timeout and use wait_for_completion_timeout
Date: Wed, 30 Apr 2014 21:44:48 +0100 [thread overview]
Message-ID: <536160C0.6040004@kernel.org> (raw)
In-Reply-To: <1398850015-17761-4-git-send-email-ch.naveen@samsung.com>
On 30/04/14 10:26, Naveen Krishna Chatradhi wrote:
> ADC module on Exynos5 SoCs runs at 600KSPS. At this conversion rate,
> waiting for 1000 msecs is wasteful (incase of h/w failure).
>
> Hence, reduce the time out to 100msecs and use
> wait_for_completion_timeout() instead of
> wait_for_completion_interruptible_timeout()
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
Applied to the togreg branch of iio.git
Thanks
> ---
> Changes since v2:
> None
> Changes since v1:
> None
> v0:
> This change is a part of the patch reviewd at https://lkml.org/lkml/2013/11/5/92
>
> drivers/iio/adc/exynos_adc.c | 18 +++++++++++-------
> 1 file changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
> index ff98c5d..939aaf7 100644
> --- a/drivers/iio/adc/exynos_adc.c
> +++ b/drivers/iio/adc/exynos_adc.c
> @@ -82,7 +82,7 @@ enum adc_version {
> #define ADC_CON_EN_START (1u << 0)
> #define ADC_DATX_MASK 0xFFF
>
> -#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000))
> +#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
>
> struct exynos_adc {
> void __iomem *regs;
> @@ -121,6 +121,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
> struct exynos_adc *info = iio_priv(indio_dev);
> unsigned long timeout;
> u32 con1, con2;
> + int ret;
>
> if (mask != IIO_CHAN_INFO_RAW)
> return -EINVAL;
> @@ -145,16 +146,19 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
> ADC_V1_CON(info->regs));
> }
>
> - timeout = wait_for_completion_interruptible_timeout
> + timeout = wait_for_completion_timeout
> (&info->completion, EXYNOS_ADC_TIMEOUT);
> - *val = info->value;
> + if (timeout == 0) {
> + ret = -ETIMEDOUT;
> + } else {
> + *val = info->value;
> + *val2 = 0;
> + ret = IIO_VAL_INT;
> + }
>
> mutex_unlock(&indio_dev->mlock);
>
> - if (timeout == 0)
> - return -ETIMEDOUT;
> -
> - return IIO_VAL_INT;
> + return ret;
> }
>
> static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
>
WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Naveen Krishna Chatradhi
<ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
naveenkrishna.ch-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
cpgs-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
grundler-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org
Subject: Re: [PATCH 3/5 v3] iio: exynos_adc: reduce timeout and use wait_for_completion_timeout
Date: Wed, 30 Apr 2014 21:44:48 +0100 [thread overview]
Message-ID: <536160C0.6040004@kernel.org> (raw)
In-Reply-To: <1398850015-17761-4-git-send-email-ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
On 30/04/14 10:26, Naveen Krishna Chatradhi wrote:
> ADC module on Exynos5 SoCs runs at 600KSPS. At this conversion rate,
> waiting for 1000 msecs is wasteful (incase of h/w failure).
>
> Hence, reduce the time out to 100msecs and use
> wait_for_completion_timeout() instead of
> wait_for_completion_interruptible_timeout()
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Reviewed-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Applied to the togreg branch of iio.git
Thanks
> ---
> Changes since v2:
> None
> Changes since v1:
> None
> v0:
> This change is a part of the patch reviewd at https://lkml.org/lkml/2013/11/5/92
>
> drivers/iio/adc/exynos_adc.c | 18 +++++++++++-------
> 1 file changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
> index ff98c5d..939aaf7 100644
> --- a/drivers/iio/adc/exynos_adc.c
> +++ b/drivers/iio/adc/exynos_adc.c
> @@ -82,7 +82,7 @@ enum adc_version {
> #define ADC_CON_EN_START (1u << 0)
> #define ADC_DATX_MASK 0xFFF
>
> -#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000))
> +#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
>
> struct exynos_adc {
> void __iomem *regs;
> @@ -121,6 +121,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
> struct exynos_adc *info = iio_priv(indio_dev);
> unsigned long timeout;
> u32 con1, con2;
> + int ret;
>
> if (mask != IIO_CHAN_INFO_RAW)
> return -EINVAL;
> @@ -145,16 +146,19 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
> ADC_V1_CON(info->regs));
> }
>
> - timeout = wait_for_completion_interruptible_timeout
> + timeout = wait_for_completion_timeout
> (&info->completion, EXYNOS_ADC_TIMEOUT);
> - *val = info->value;
> + if (timeout == 0) {
> + ret = -ETIMEDOUT;
> + } else {
> + *val = info->value;
> + *val2 = 0;
> + ret = IIO_VAL_INT;
> + }
>
> mutex_unlock(&indio_dev->mlock);
>
> - if (timeout == 0)
> - return -ETIMEDOUT;
> -
> - return IIO_VAL_INT;
> + return ret;
> }
>
> static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
>
next prev parent reply other threads:[~2014-04-30 20:43 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-30 9:26 [PATCH 0/5 v3] iio: exynos_adc: fix minor nits in the driver Naveen Krishna Chatradhi
2014-04-30 9:26 ` [PATCH 1/5 v3] iio: exynos_adc: use indio_dev->dev structure to handle child nodes Naveen Krishna Chatradhi
2014-04-30 20:43 ` Jonathan Cameron
2014-04-30 20:43 ` Jonathan Cameron
2014-04-30 9:26 ` [PATCH 2/5 v3] iio: exynos_adc: rearrange clk and regulator enable/disable calls Naveen Krishna Chatradhi
2014-04-30 20:44 ` Jonathan Cameron
2014-04-30 9:26 ` [PATCH 3/5 v3] iio: exynos_adc: reduce timeout and use wait_for_completion_timeout Naveen Krishna Chatradhi
2014-04-30 20:44 ` Jonathan Cameron [this message]
2014-04-30 20:44 ` Jonathan Cameron
2014-04-30 9:26 ` [PATCH 4/5 v3] iio: exynos_adc: do a soft reset in case of timeout Naveen Krishna Chatradhi
2014-04-30 20:47 ` Jonathan Cameron
2014-04-30 20:47 ` Jonathan Cameron
2014-04-30 9:26 ` [PATCH 5/5 v3] iio: exynos_adc: do a reinit_completion before the conversion Naveen Krishna Chatradhi
2014-04-30 20:49 ` Jonathan Cameron
2014-04-30 20:49 ` Jonathan Cameron
2014-04-30 23:23 ` Doug Anderson
2014-04-30 23:23 ` Doug Anderson
2014-05-01 5:48 ` Jonathan Cameron
2014-05-01 5:48 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536160C0.6040004@kernel.org \
--to=jic23@kernel.org \
--cc=ch.naveen@samsung.com \
--cc=cpgs@samsung.com \
--cc=dianders@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=grundler@chromium.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=naveenkrishna.ch@gmail.com \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.