Re: [PATCH v2 0/6] Add CPTS support for AM437x

[Mugunthan V N <mugunthanvnm@ti.com>]

On Friday 02 May 2014 12:01 PM, George Cherian wrote:
> The series adds CPTS support for AM4372.
>
> Patch 1 - DT changes w.r.t clock changes for AM33xx.
> Patch 2 - CPTS clock name harcoding in the driver is removed. 
> 	  Easier to pass the clock name from dt rather than hardcoding in driver.
> 	  Also in prepration for DRA7x CPTS support.
> Patch 3 - Enable the CPTS support for both DRA7x and AM4372 in the driver.
> Patch 4 - Enable the Annexe F for L2 PTP for AM437x and DRA7x.
> Patch 5 - Change the default clocksource to dpll_core_m5 
> Patch 6 - DT changes for AM4372.
>
>
> v1 -> v2
> 	Patch 1 and 2 Re-ordering.
> 	Seperate TS_BITS define for Hw version V2 and V3
>
> George Cherian (6):
>   ARM: dts: am33xx: Add clock names for cpsw and cpts
>   drivers: net: cpts: Remove hardcoded clock name for CPTS
>   drivers: net: cpsw: Enable CPTS for DRA7xx and AM4372
>   drivers: net: cpsw: Enable Annexe F Time sync
>   ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk
>   ARM: dts: am4372: Add clock names for cpsw and cpts
>
>  arch/arm/boot/dts/am33xx.dtsi  |  2 ++
>  arch/arm/boot/dts/am4372.dtsi  |  2 ++
>  drivers/clk/ti/clk-43xx.c      | 16 ++++++++++++
>  drivers/net/ethernet/ti/cpsw.c | 56 +++++++++++++++++++++++++++++++-----------
>  drivers/net/ethernet/ti/cpts.c | 11 +++------
>  5 files changed, 66 insertions(+), 21 deletions(-)
>

Acked-by: Mugunthan V N <mugunthanvnm@ti.com>

Regards
Mugunthan V N