* Smart/RPM automatic feed configuration
@ 2014-05-07 6:49 Alex J Lennon
2014-05-07 9:16 ` Alex J Lennon
0 siblings, 1 reply; 2+ messages in thread
From: Alex J Lennon @ 2014-05-07 6:49 UTC (permalink / raw)
To: Yocto
I'm using RPM package feeds with smart, and am wondering how to
configure up the feed sources easily at build time?
I see in 3.4.5 of the reference manual it talks about base-feeds.conf
for opkg but I'm wondering if there's a variable
I can set in local.conf to correct setup, say, the URL prefix for the
needed feed sources for the image?
Thanks,
Alex
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Smart/RPM automatic feed configuration
2014-05-07 6:49 Smart/RPM automatic feed configuration Alex J Lennon
@ 2014-05-07 9:16 ` Alex J Lennon
0 siblings, 0 replies; 2+ messages in thread
From: Alex J Lennon @ 2014-05-07 9:16 UTC (permalink / raw)
To: yocto
On 07/05/2014 07:49, Alex J Lennon wrote:
> I'm using RPM package feeds with smart, and am wondering how to
> configure up the feed sources easily at build time?
>
> I see in 3.4.5 of the reference manual it talks about base-feeds.conf
> for opkg but I'm wondering if there's a variable
> I can set in local.conf to correct setup, say, the URL prefix for the
> needed feed sources for the image?
I discovered FEED_DEPLOYDIR_BASE_URI in the reference manual glossary,
with some notes on OPKG usage.
This looks ideal but it doesn't appear to be implemented yet for RPM?
(as least setting that seems to have
no effect on my smart channels in a built image)
Alex
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-05-07 9:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-07 6:49 Smart/RPM automatic feed configuration Alex J Lennon
2014-05-07 9:16 ` Alex J Lennon
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.