From: ivan.khoronzhuk@ti.com (Ivan Khoronzhuk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: k2e-evm: add AEMIF/NAND device entry
Date: Thu, 8 May 2014 23:33:37 +0300 [thread overview]
Message-ID: <536BEA21.8020603@ti.com> (raw)
In-Reply-To: <1399581089-2505-1-git-send-email-ivan.khoronzhuk@ti.com>
ignore this
On 05/08/2014 11:31 PM, Ivan Khoronzhuk wrote:
> Add AEMIF/NAND device entry.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
> arch/arm/boot/dts/k2e-evm.dts | 52 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts
> index 74b3b63..0370e2f 100644
> --- a/arch/arm/boot/dts/k2e-evm.dts
> +++ b/arch/arm/boot/dts/k2e-evm.dts
> @@ -58,3 +58,55 @@
> &usb1 {
> status = "okay";
> };
> +
> +&aemif {
> + cs0 {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + clock-ranges;
> + ranges;
> +
> + ti,cs-chipselect = <0>;
> + /* all timings in nanoseconds */
> + ti,cs-min-turnaround-ns = <12>;
> + ti,cs-read-hold-ns = <6>;
> + ti,cs-read-strobe-ns = <23>;
> + ti,cs-read-setup-ns = <9>;
> + ti,cs-write-hold-ns = <8>;
> + ti,cs-write-strobe-ns = <23>;
> + ti,cs-write-setup-ns = <8>;
> +
> + nand at 0,0 {
> + compatible = "ti,keystone-nand","ti,davinci-nand";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0 0 0x4000000
> + 1 0 0x0000100>;
> +
> + ti,davinci-chipselect = <0>;
> + ti,davinci-mask-ale = <0x2000>;
> + ti,davinci-mask-cle = <0x4000>;
> + ti,davinci-mask-chipsel = <0>;
> + nand-ecc-mode = "hw";
> + ti,davinci-ecc-bits = <4>;
> + nand-on-flash-bbt;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x100000>;
> + read-only;
> + };
> +
> + partition at 100000 {
> + label = "params";
> + reg = <0x100000 0x80000>;
> + read-only;
> + };
> +
> + partition at 180000 {
> + label = "ubifs";
> + reg = <0x180000 0x7E80000>;
> + };
> + };
> + };
> +};
--
Regards,
Ivan Khoronzhuk
WARNING: multiple messages have this Message-ID (diff)
From: Ivan Khoronzhuk <ivan.khoronzhuk-l0cyMroinI0@public.gmane.org>
To: santosh.shilimkar-l0cyMroinI0@public.gmane.org
Cc: grygorii.strashko-l0cyMroinI0@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] ARM: dts: k2e-evm: add AEMIF/NAND device entry
Date: Thu, 8 May 2014 23:33:37 +0300 [thread overview]
Message-ID: <536BEA21.8020603@ti.com> (raw)
In-Reply-To: <1399581089-2505-1-git-send-email-ivan.khoronzhuk-l0cyMroinI0@public.gmane.org>
ignore this
On 05/08/2014 11:31 PM, Ivan Khoronzhuk wrote:
> Add AEMIF/NAND device entry.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk-l0cyMroinI0@public.gmane.org>
> ---
> arch/arm/boot/dts/k2e-evm.dts | 52 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts
> index 74b3b63..0370e2f 100644
> --- a/arch/arm/boot/dts/k2e-evm.dts
> +++ b/arch/arm/boot/dts/k2e-evm.dts
> @@ -58,3 +58,55 @@
> &usb1 {
> status = "okay";
> };
> +
> +&aemif {
> + cs0 {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + clock-ranges;
> + ranges;
> +
> + ti,cs-chipselect = <0>;
> + /* all timings in nanoseconds */
> + ti,cs-min-turnaround-ns = <12>;
> + ti,cs-read-hold-ns = <6>;
> + ti,cs-read-strobe-ns = <23>;
> + ti,cs-read-setup-ns = <9>;
> + ti,cs-write-hold-ns = <8>;
> + ti,cs-write-strobe-ns = <23>;
> + ti,cs-write-setup-ns = <8>;
> +
> + nand@0,0 {
> + compatible = "ti,keystone-nand","ti,davinci-nand";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0 0 0x4000000
> + 1 0 0x0000100>;
> +
> + ti,davinci-chipselect = <0>;
> + ti,davinci-mask-ale = <0x2000>;
> + ti,davinci-mask-cle = <0x4000>;
> + ti,davinci-mask-chipsel = <0>;
> + nand-ecc-mode = "hw";
> + ti,davinci-ecc-bits = <4>;
> + nand-on-flash-bbt;
> +
> + partition@0 {
> + label = "u-boot";
> + reg = <0x0 0x100000>;
> + read-only;
> + };
> +
> + partition@100000 {
> + label = "params";
> + reg = <0x100000 0x80000>;
> + read-only;
> + };
> +
> + partition@180000 {
> + label = "ubifs";
> + reg = <0x180000 0x7E80000>;
> + };
> + };
> + };
> +};
--
Regards,
Ivan Khoronzhuk
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-05-08 20:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-08 18:59 [PATCH] ARM: dts: k2e-evm: add AEMIF/NAND device entry Ivan Khoronzhuk
2014-05-08 18:59 ` Ivan Khoronzhuk
2014-05-08 19:17 ` Santosh Shilimkar
2014-05-08 19:17 ` Santosh Shilimkar
2014-05-08 20:26 ` Ivan Khoronzhuk
2014-05-08 20:26 ` Ivan Khoronzhuk
2014-05-08 21:21 ` Santosh Shilimkar
2014-05-08 21:21 ` Santosh Shilimkar
2014-05-08 21:25 ` Ivan Khoronzhuk
2014-05-08 21:25 ` Ivan Khoronzhuk
2014-05-08 20:31 ` Ivan Khoronzhuk
2014-05-08 20:31 ` Ivan Khoronzhuk
2014-05-08 20:33 ` Ivan Khoronzhuk [this message]
2014-05-08 20:33 ` Ivan Khoronzhuk
2014-05-08 21:29 ` [PATCH v2] ARM: dts: k2l-evm: " Ivan Khoronzhuk
2014-05-08 21:29 ` Ivan Khoronzhuk
2014-05-08 21:34 ` Santosh Shilimkar
2014-05-08 21:34 ` Santosh Shilimkar
2014-05-08 20:32 ` [PATCH v2] ARM: dts: k2e-evm: " Ivan Khoronzhuk
2014-05-08 20:32 ` Ivan Khoronzhuk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536BEA21.8020603@ti.com \
--to=ivan.khoronzhuk@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.