[PATCHv5 08/20] usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers

[mathias.nyman@linux.intel.com (Mathias Nyman)]

On 05/11/2014 09:17 PM, Thomas Petazzoni wrote:
> From: Gregory CLEMENT <gregory.clement@free-electrons.com>
>
> The Armada 375 and 38x SoCs come with an XHCI controller that requires
> some specific initialization related to the MBus windows
> configuration. This patch adds the support for this special
> configuration as an XHCI quirk executed during probe.
>
> Two new compatible strings are added to identify the Armada 375 and
> Armada 38x XHCI controllers, and therefore enable the relevant quirk.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
>   drivers/usb/host/Kconfig      |  8 +++++
>   drivers/usb/host/Makefile     |  3 ++
>   drivers/usb/host/xhci-mvebu.c | 70 +++++++++++++++++++++++++++++++++++++++++++
>   drivers/usb/host/xhci-mvebu.h | 21 +++++++++++++
>   drivers/usb/host/xhci-plat.c  | 12 ++++++++
>   5 files changed, 114 insertions(+)
>   create mode 100644 drivers/usb/host/xhci-mvebu.c
>   create mode 100644 drivers/usb/host/xhci-mvebu.h
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 3d9e540..9247ad2 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -29,6 +29,14 @@ if USB_XHCI_HCD
>   config USB_XHCI_PLATFORM
>   	tristate
>
> +config USB_XHCI_MVEBU
> +	tristate "xHCI support for Marvell Armada 375/38x"
> +	select USB_XHCI_PLATFORM
> +	depends on ARCH_MVEBU || COMPILE_TEST
> +	---help---
> +	  Say 'Y' to enable the support for the xHCI host controller
> +	  found in Marvell Armada 375/38x ARM SOCs.
> +
>   endif # USB_XHCI_HCD
>
>   config USB_EHCI_HCD
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 7530468..7c0886a 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -19,6 +19,9 @@ xhci-hcd-$(CONFIG_PCI)	+= xhci-pci.o
>
>   ifneq ($(CONFIG_USB_XHCI_PLATFORM), )
>   	xhci-hcd-y		+= xhci-plat.o
> +ifneq ($(CONFIG_USB_XHCI_MVEBU), )
> +	xhci-hcd-y		+= xhci-mvebu.o
> +endif
>   endif
>
>   obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
> diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
> new file mode 100644
> index 0000000..fab9d6f
> --- /dev/null
> +++ b/drivers/usb/host/xhci-mvebu.c
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (C) 2014 Marvell
> + * Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/mbus.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#define USB3_MAX_WINDOWS	4
> +#define USB3_WIN_CTRL(w)	(0x0 + ((w) * 8))
> +#define USB3_WIN_BASE(w)	(0x4 + ((w) * 8))
> +
> +static void xhci_mvebu_mbus_config(void __iomem *base,
> +			const struct mbus_dram_target_info *dram)
> +{
> +	int win;
> +
> +	/* Clear all existing windows */
> +	for (win = 0; win < USB3_MAX_WINDOWS; win++) {
> +		writel(0, base + USB3_WIN_CTRL(win));
> +		writel(0, base + USB3_WIN_BASE(win));
> +	}
> +
> +	/* Program each DRAM CS in a seperate window */
> +	for (win = 0; win < dram->num_cs; win++) {
> +		const struct mbus_dram_window *cs = dram->cs + win;
> +
> +		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
> +		       (dram->mbus_dram_target_id << 4) | 1,
> +		       base + USB3_WIN_CTRL(win));
> +
> +		writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(win));
> +	}
> +}
> +
> +int xhci_mvebu_mbus_init_quirk(struct platform_device *pdev)
> +{
> +	struct resource	*res;
> +	void __iomem *base;
> +	const struct mbus_dram_target_info *dram;

Hi

Sparse warns about this:

drivers/usb/host/xhci-mvebu.c:42:5: warning: symbol 'xhci_mvebu_mbus_init_quirk' 
was not declared. Should it be static?

Otherwise I think it looks good

-Mathias