From: "Martin J. Bligh" <mbligh@aracnet.com>
To: Andrew Morton <akpm@digeo.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.5.73-mm3
Date: Wed, 02 Jul 2003 12:56:03 -0700 [thread overview]
Message-ID: <537120000.1057175763@flay> (raw)
In-Reply-To: <20030701221829.3e0edf3a.akpm@digeo.com>
Spiffy - works now.
Kernbench: (make -j N vmlinux, where N = 2 x num_cpus)
Elapsed System User CPU
2.5.73 45.08 98.30 568.56 1479.00
2.5.73-mm3 44.39 92.72 563.04 1476.25
2.5.73-mjb1 43.70 75.71 564.62 1465.00
Kernbench: (make -j N vmlinux, where N = 16 x num_cpus)
Elapsed System User CPU
2.5.73 45.99 115.34 571.60 1493.00
2.5.73-mm3 45.36 111.71 565.71 1493.75
2.5.73-mjb1 43.88 88.37 570.41 1500.75
Kernbench: (make -j vmlinux, maximal tasks)
Elapsed System User CPU
2.5.73 46.01 115.06 571.66 1491.75
2.5.73-mm3 45.38 114.91 565.81 1497.75
2.5.73-mjb1 43.93 85.48 570.47 1492.25
DISCLAIMER: SPEC(tm) and the benchmark name SDET(tm) are registered
trademarks of the Standard Performance Evaluation Corporation. This
benchmarking was performed for research purposes only, and the run results
are non-compliant and not-comparable with any published results.
Results are shown as percentages of the first set displayed
SDET 1 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 2.5%
2.5.73-mm3 105.3% 2.2%
2.5.73-mjb1 112.8% 0.0%
SDET 2 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 7.1%
2.5.73-mm3 99.3% 3.4%
2.5.73-mjb1 108.8% 4.7%
SDET 4 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.5%
2.5.73-mm3 102.5% 2.2%
2.5.73-mjb1 132.3% 0.0%
SDET 8 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 1.4%
2.5.73-mm3 96.7% 0.7%
2.5.73-mjb1 122.5% 0.3%
SDET 16 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.5%
2.5.73-mm3 101.8% 0.3%
2.5.73-mjb1 122.3% 0.9%
SDET 32 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.1%
2.5.73-mm3 103.6% 0.8%
2.5.73-mjb1 123.2% 0.8%
SDET 64 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.2%
2.5.73-mm3 104.1% 0.2%
2.5.73-mjb1 123.8% 0.1%
SDET 128 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.2%
2.5.73-mm3 103.5% 0.1%
2.5.73-mjb1 122.6% 0.3%
WARNING: multiple messages have this Message-ID (diff)
From: "Martin J. Bligh" <mbligh@aracnet.com>
To: Andrew Morton <akpm@digeo.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.5.73-mm3
Date: Wed, 02 Jul 2003 12:56:03 -0700 [thread overview]
Message-ID: <537120000.1057175763@flay> (raw)
In-Reply-To: <20030701221829.3e0edf3a.akpm@digeo.com>
Spiffy - works now.
Kernbench: (make -j N vmlinux, where N = 2 x num_cpus)
Elapsed System User CPU
2.5.73 45.08 98.30 568.56 1479.00
2.5.73-mm3 44.39 92.72 563.04 1476.25
2.5.73-mjb1 43.70 75.71 564.62 1465.00
Kernbench: (make -j N vmlinux, where N = 16 x num_cpus)
Elapsed System User CPU
2.5.73 45.99 115.34 571.60 1493.00
2.5.73-mm3 45.36 111.71 565.71 1493.75
2.5.73-mjb1 43.88 88.37 570.41 1500.75
Kernbench: (make -j vmlinux, maximal tasks)
Elapsed System User CPU
2.5.73 46.01 115.06 571.66 1491.75
2.5.73-mm3 45.38 114.91 565.81 1497.75
2.5.73-mjb1 43.93 85.48 570.47 1492.25
DISCLAIMER: SPEC(tm) and the benchmark name SDET(tm) are registered
trademarks of the Standard Performance Evaluation Corporation. This
benchmarking was performed for research purposes only, and the run results
are non-compliant and not-comparable with any published results.
Results are shown as percentages of the first set displayed
SDET 1 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 2.5%
2.5.73-mm3 105.3% 2.2%
2.5.73-mjb1 112.8% 0.0%
SDET 2 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 7.1%
2.5.73-mm3 99.3% 3.4%
2.5.73-mjb1 108.8% 4.7%
SDET 4 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.5%
2.5.73-mm3 102.5% 2.2%
2.5.73-mjb1 132.3% 0.0%
SDET 8 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 1.4%
2.5.73-mm3 96.7% 0.7%
2.5.73-mjb1 122.5% 0.3%
SDET 16 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.5%
2.5.73-mm3 101.8% 0.3%
2.5.73-mjb1 122.3% 0.9%
SDET 32 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.1%
2.5.73-mm3 103.6% 0.8%
2.5.73-mjb1 123.2% 0.8%
SDET 64 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.2%
2.5.73-mm3 104.1% 0.2%
2.5.73-mjb1 123.8% 0.1%
SDET 128 (see disclaimer)
Throughput Std. Dev
2.5.73 100.0% 0.2%
2.5.73-mm3 103.5% 0.1%
2.5.73-mjb1 122.6% 0.3%
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"aart@kvack.org"> aart@kvack.org </a>
next prev parent reply other threads:[~2003-07-02 19:53 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-02 3:38 2.5.73-mm3 Andrew Morton
2003-07-02 3:38 ` 2.5.73-mm3 Andrew Morton
2003-07-02 5:07 ` 2.5.73-mm3 Martin J. Bligh
2003-07-02 5:07 ` 2.5.73-mm3 Martin J. Bligh
2003-07-02 5:18 ` 2.5.73-mm3 Andrew Morton
2003-07-02 5:18 ` 2.5.73-mm3 Andrew Morton
2003-07-02 18:12 ` 2.5.73-mm3 Martin J. Bligh
2003-07-02 18:12 ` 2.5.73-mm3 Martin J. Bligh
2003-07-02 18:50 ` 2.5.73-mm3 Martin J. Bligh
2003-07-02 18:50 ` 2.5.73-mm3 Martin J. Bligh
2003-07-02 19:56 ` Martin J. Bligh [this message]
2003-07-02 19:56 ` 2.5.73-mm3 Martin J. Bligh
2003-07-02 9:10 ` 2.5.73-mm3 `highmem_start_page' undeclared with DEBUG_PAGEALLOC and no highmem Helge Hafting
2003-07-02 9:10 ` Helge Hafting
2003-07-02 10:54 ` 2.5.73-mm3 Maneesh Soni
2003-07-02 10:54 ` 2.5.73-mm3 Maneesh Soni
2003-07-02 15:18 ` 2.5.73-mm3 Andrew Morton
2003-07-02 15:18 ` 2.5.73-mm3 Andrew Morton
2003-07-02 18:27 ` 2.5.73-mm3 Valdis.Kletnieks
2003-07-10 2:11 ` 2.5.73-mm3 vs. linux-2.5.74-mm1 Piet Delaney
2003-07-10 2:11 ` Piet Delaney
2003-07-10 2:32 ` Piet Delaney
2003-07-10 2:32 ` Piet Delaney
2003-07-10 3:13 ` Piet Delaney
2003-07-10 3:13 ` Piet Delaney
2003-07-10 3:13 ` Piet Delaney
2003-07-10 3:13 ` Piet Delaney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537120000.1057175763@flay \
--to=mbligh@aracnet.com \
--cc=akpm@digeo.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.