All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Greear <greearb@candelatech.com>
To: ath10k <ath10k@lists.infradead.org>
Subject: Rate vs Range graphs for ath10k through attentuator.
Date: Thu, 15 May 2014 11:53:01 -0700	[thread overview]
Message-ID: <53750D0D.4060106@candelatech.com> (raw)

Just FYI...here's a graph of a UDP upload test through an attenuator.
The attenuator goes from 0 up to 95.5, though isolation is not perfect
so even at highest attenuation a small bit of signal gets through.

One interesting thing to me is that ath10k does so well at very hot
signal strength.  ath9k runs like crap with hot signal...

AP is another of our systems, both are using my CT firmware, my 3.14.4+
kernel, and WLE900VX NICs.  32 stations were created and associated
on the station machine, but only one was actively sending any significant
data.  AP system had single active AP vdev, one station interface that was
not connected.  Traffic flow is station send to AP, AP sends back to station
machine on 1Gbps wired Ethernet connection.  Both systems are mobile core-i7
CPU, 8GB RAM, etc.

http://www.candelatech.com/examples/ath10k-rate-vs-range-udp-upload/

Lots of graphs in the link above..the most useful ones are:

http://www.candelatech.com/examples/ath10k-rate-vs-range-udp-upload/chart-0.png

http://www.candelatech.com/examples/ath10k-rate-vs-range-udp-upload/chart-30.png

The throughput is a bit spikey, possibly because I am only doing 5 second throughput
tests.  Will run a 30-second one some day and hope that smooths out.

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2014-05-15 18:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-15 18:53 Ben Greear [this message]
2014-05-16 12:50 ` Rate vs Range graphs for ath10k through attentuator Kalle Valo
2014-05-16 12:57   ` Ben Greear
2014-05-16 13:04     ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53750D0D.4060106@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=ath10k@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.