From: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
To: Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Tuomas Tynkkynen
<ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Cc: Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Peter De Schrijver
<pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] clk: tegra: Fix wrong value written to PLLE_AUX
Date: Fri, 16 May 2014 10:05:18 -0600 [thread overview]
Message-ID: <5376373E.1080401@wwwdotorg.org> (raw)
In-Reply-To: <20140516143110.GA28338@ulmo>
On 05/16/2014 08:31 AM, Thierry Reding wrote:
> On Fri, May 16, 2014 at 04:50:20PM +0300, Tuomas Tynkkynen wrote:
>> The value written to PLLE_AUX was incorrect due to a wrong variable
>> being used.
>>
>> Signed-off-by: Tuomas Tynkkynen <ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> Tested-by: Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> ---
>> This fix is required for the (upcoming) SATA support.
>> drivers/clk/tegra/clk-pll.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Reviewed-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> Tested-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>
> Mike, Peter, it might be good to have this go into 3.16 as a
> prerequisite for the upcoming SATA driver (which presumably won't be
> ready until 3.17, but in that case it would be good to have this
> prerequisite merged already).
Probably even Cc: stable since it's a fix for a bug that I assume has
been in a kernel release or two?
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Warren <swarren@wwwdotorg.org>
To: Thierry Reding <thierry.reding@gmail.com>,
Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Cc: Mike Turquette <mturquette@linaro.org>,
Peter De Schrijver <pdeschrijver@nvidia.com>,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: Re: [PATCH] clk: tegra: Fix wrong value written to PLLE_AUX
Date: Fri, 16 May 2014 10:05:18 -0600 [thread overview]
Message-ID: <5376373E.1080401@wwwdotorg.org> (raw)
In-Reply-To: <20140516143110.GA28338@ulmo>
On 05/16/2014 08:31 AM, Thierry Reding wrote:
> On Fri, May 16, 2014 at 04:50:20PM +0300, Tuomas Tynkkynen wrote:
>> The value written to PLLE_AUX was incorrect due to a wrong variable
>> being used.
>>
>> Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
>> Tested-by: Mikko Perttunen <mperttunen@nvidia.com>
>> ---
>> This fix is required for the (upcoming) SATA support.
>> drivers/clk/tegra/clk-pll.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Reviewed-by: Thierry Reding <treding@nvidia.com>
> Tested-by: Thierry Reding <treding@nvidia.com>
> Acked-by: Thierry Reding <treding@nvidia.com>
>
> Mike, Peter, it might be good to have this go into 3.16 as a
> prerequisite for the upcoming SATA driver (which presumably won't be
> ready until 3.17, but in that case it would be good to have this
> prerequisite merged already).
Probably even Cc: stable since it's a fix for a bug that I assume has
been in a kernel release or two?
next prev parent reply other threads:[~2014-05-16 16:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 13:50 [PATCH] clk: tegra: Fix wrong value written to PLLE_AUX Tuomas Tynkkynen
2014-05-16 13:50 ` Tuomas Tynkkynen
[not found] ` <1400248220-16025-1-git-send-email-ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-05-16 14:31 ` Thierry Reding
2014-05-16 14:31 ` Thierry Reding
2014-05-16 16:05 ` Stephen Warren [this message]
2014-05-16 16:05 ` Stephen Warren
[not found] ` <5376373E.1080401-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-05-17 21:06 ` Thierry Reding
2014-05-17 21:06 ` Thierry Reding
2014-05-19 8:45 ` Peter De Schrijver
2014-05-19 8:45 ` Peter De Schrijver
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5376373E.1080401@wwwdotorg.org \
--to=swarren-3lzwwm7+weoh9zmkesr00q@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.