Re: Mwifiex driver on Globalscale Mirabox

[Michael Howard <mike@dewberryfields.co.uk>]

On 16/05/2014 13:27, Avinash Patil wrote:
>
> Hi Michael,
>
> We are not able to reproduce this issue in our setup with sd8787 p96. 
> Could you please share hostapd config file, console logs and driver 
> debug logs?
>
> Thanks,
> -Avinash
>
>
Hi Avinash,

Not sure how to enable driver debug logs, other than debugfs and that 
contains only empty files, and adding -ddd to hostapd.

hostapd.conf is simple, just for testing, as follows;

interface=uap0
bridge=br0
driver=nl80211
ssid=TEST
hw_mode=g
channel=1
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa=3
wpa_passphrase=*******************
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP

root@mirabox:/etc/init.d# ./hostapd start
[....] Starting advanced IEEE 802.11 management: hostapddevice uap0 
entered promiscuous mode
br0: port 2(uap0) entered listening state
br0: port 2(uap0) entered listening state
mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x112 error, result=0x2
. ok

==> kern.log <==
May 17 13:23:52 mirabox kernel: mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 
0x112 error, result=0x2

The odd thing is, I have just added an atheros AR9287 mini pcie card to 
the Mirabox, rebuilt the kernel (only adding atheros support) and now 
the SD8787 card and mwifiex work.
I have no idea why this is other than possibly a flakey Mirabox. I will 
let you know if I get a better idea (maybe I'll now take out the Atheros 
card) of what's happening.

Regards,
Mike

--