[PATCH 0/3] OMAPDSS: DT support for panel-lgphilips-lb035q02

[PATCH 0/3] OMAPDSS: DT support for panel-lgphilips-lb035q02

[Tomi Valkeinen]

Hi,

This adds DT support to panel-lgphilips-lb035q02. Compile tested only.

This panel is used on some Overo boards (alto35, if I'm not mistaken).

 Tomi

Tomi Valkeinen (3):
  OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
  OMAPDSS: panel-lgphilips-lb035q02: Add DT support
  Doc/DT: Add binding doc for lgphilips,lb035q02.txt

 .../bindings/video/lgphilips,lb035q02.txt          | 33 ++++++++++
 .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 76 +++++++++++++++++-----
 2 files changed, 94 insertions(+), 15 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt

-- 
1.9.1

[PATCH 0/3] OMAPDSS: DT support for panel-lgphilips-lb035q02

[Tomi Valkeinen]

Hi,

This adds DT support to panel-lgphilips-lb035q02. Compile tested only.

This panel is used on some Overo boards (alto35, if I'm not mistaken).

 Tomi

Tomi Valkeinen (3):
  OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
  OMAPDSS: panel-lgphilips-lb035q02: Add DT support
  Doc/DT: Add binding doc for lgphilips,lb035q02.txt

 .../bindings/video/lgphilips,lb035q02.txt          | 33 ++++++++++
 .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 76 +++++++++++++++++-----
 2 files changed, 94 insertions(+), 15 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt

-- 
1.9.1

[PATCH 1/3] OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio

[Tomi Valkeinen]

The new gpiod API supports automatic handling of active-high/active-low
with DT. To make it possible to use that when booting with DT, change
the driver's handling of the enable GPIO to use gpiod.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 32 ++++++++++++----------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 2e6b513222d9..6e6acd696a70 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
@@ -50,9 +50,10 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	int reset_gpio;
+	/* used for non-DT boot, to be removed */
 	int backlight_gpio;
-	int enable_gpio;
+
+	struct gpio_desc *enable_gpio;
 };
 
 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -165,8 +166,8 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 1);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
@@ -184,8 +185,8 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 0);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
@@ -243,6 +244,7 @@ static int lb035q02_probe_pdata(struct spi_device *spi)
 	const struct panel_lb035q02_platform_data *pdata;
 	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 	struct omap_dss_device *dssdev, *in;
+	int r;
 
 	pdata = dev_get_platdata(&spi->dev);
 
@@ -260,10 +262,19 @@ static int lb035q02_probe_pdata(struct spi_device *spi)
 	dssdev = &ddata->dssdev;
 	dssdev->name = pdata->name;
 
-	ddata->enable_gpio = pdata->enable_gpio;
+	r = devm_gpio_request_one(&spi->dev, pdata->enable_gpio,
+					GPIOF_OUT_INIT_LOW, "panel enable");
+	if (r)
+		goto err_gpio;
+
+	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
 	ddata->backlight_gpio = pdata->backlight_gpio;
 
 	return 0;
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
 }
 
 static int lb035q02_panel_spi_probe(struct spi_device *spi)
@@ -288,13 +299,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	if (gpio_is_valid(ddata->enable_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio,
-				GPIOF_OUT_INIT_LOW, "panel enable");
-		if (r)
-			goto err_gpio;
-	}
-
 	if (gpio_is_valid(ddata->backlight_gpio)) {
 		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
 				GPIOF_OUT_INIT_LOW, "panel backlight");
-- 
1.9.1

[PATCH 1/3] OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio

[Tomi Valkeinen]

The new gpiod API supports automatic handling of active-high/active-low
with DT. To make it possible to use that when booting with DT, change
the driver's handling of the enable GPIO to use gpiod.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 32 ++++++++++++----------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 2e6b513222d9..6e6acd696a70 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
@@ -50,9 +50,10 @@ struct panel_drv_data {
 
 	struct omap_video_timings videomode;
 
-	int reset_gpio;
+	/* used for non-DT boot, to be removed */
 	int backlight_gpio;
-	int enable_gpio;
+
+	struct gpio_desc *enable_gpio;
 };
 
 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -165,8 +166,8 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (r)
 		return r;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 1);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
@@ -184,8 +185,8 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
 	if (!omapdss_device_is_enabled(dssdev))
 		return;
 
-	if (gpio_is_valid(ddata->enable_gpio))
-		gpio_set_value_cansleep(ddata->enable_gpio, 0);
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 
 	if (gpio_is_valid(ddata->backlight_gpio))
 		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
@@ -243,6 +244,7 @@ static int lb035q02_probe_pdata(struct spi_device *spi)
 	const struct panel_lb035q02_platform_data *pdata;
 	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 	struct omap_dss_device *dssdev, *in;
+	int r;
 
 	pdata = dev_get_platdata(&spi->dev);
 
@@ -260,10 +262,19 @@ static int lb035q02_probe_pdata(struct spi_device *spi)
 	dssdev = &ddata->dssdev;
 	dssdev->name = pdata->name;
 
-	ddata->enable_gpio = pdata->enable_gpio;
+	r = devm_gpio_request_one(&spi->dev, pdata->enable_gpio,
+					GPIOF_OUT_INIT_LOW, "panel enable");
+	if (r)
+		goto err_gpio;
+
+	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
 	ddata->backlight_gpio = pdata->backlight_gpio;
 
 	return 0;
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
 }
 
 static int lb035q02_panel_spi_probe(struct spi_device *spi)
@@ -288,13 +299,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	if (gpio_is_valid(ddata->enable_gpio)) {
-		r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio,
-				GPIOF_OUT_INIT_LOW, "panel enable");
-		if (r)
-			goto err_gpio;
-	}
-
 	if (gpio_is_valid(ddata->backlight_gpio)) {
 		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
 				GPIOF_OUT_INIT_LOW, "panel backlight");
-- 
1.9.1

[PATCH 2/3] OMAPDSS: panel-lgphilips-lb035q02: Add DT support

[Tomi Valkeinen]

Add DT support for panel-lgphilips-lb035q02.

We disable the use of the backlight_gpio as it should be handled via
backlight framework with DT boots.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 44 +++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 6e6acd696a70..76c4fdc51c31 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
@@ -159,7 +159,8 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 	in->ops.dpi->set_timings(in, &ddata->videomode);
 
 	r = in->ops.dpi->enable(in);
@@ -277,6 +278,35 @@ err_gpio:
 	return r;
 }
 
+static int lb035q02_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	struct gpio_desc *gpio;
+
+	gpio = devm_gpiod_get(&spi->dev, "enable");
+	if (IS_ERR(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return PTR_ERR(gpio);
+	} else {
+		gpiod_direction_output(gpio, 0);
+		ddata->enable_gpio = gpio;
+	}
+
+	ddata->backlight_gpio = -ENOENT;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int lb035q02_panel_spi_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -295,6 +325,10 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 		r = lb035q02_probe_pdata(spi);
 		if (r)
 			return r;
+	} else if (spi->dev.of_node) {
+		r = lb035q02_probe_of(spi);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -346,6 +380,13 @@ static int lb035q02_panel_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id lb035q02_of_match[] = {
+	{ .compatible = "omapdss,lgphilips,lb035q02", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, lb035q02_of_match);
+
 static struct spi_driver lb035q02_spi_driver = {
 	.probe		= lb035q02_panel_spi_probe,
 	.remove		= lb035q02_panel_spi_remove,
@@ -357,6 +398,7 @@ static struct spi_driver lb035q02_spi_driver = {
 
 module_spi_driver(lb035q02_spi_driver);
 
+MODULE_ALIAS("spi:lgphilips,lb035q02");
 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
 MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
 MODULE_LICENSE("GPL");
-- 
1.9.1

[PATCH 2/3] OMAPDSS: panel-lgphilips-lb035q02: Add DT support

[Tomi Valkeinen]

Add DT support for panel-lgphilips-lb035q02.

We disable the use of the backlight_gpio as it should be handled via
backlight framework with DT boots.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 44 +++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 6e6acd696a70..76c4fdc51c31 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
@@ -159,7 +159,8 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
 	if (omapdss_device_is_enabled(dssdev))
 		return 0;
 
-	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 	in->ops.dpi->set_timings(in, &ddata->videomode);
 
 	r = in->ops.dpi->enable(in);
@@ -277,6 +278,35 @@ err_gpio:
 	return r;
 }
 
+static int lb035q02_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	struct gpio_desc *gpio;
+
+	gpio = devm_gpiod_get(&spi->dev, "enable");
+	if (IS_ERR(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return PTR_ERR(gpio);
+	} else {
+		gpiod_direction_output(gpio, 0);
+		ddata->enable_gpio = gpio;
+	}
+
+	ddata->backlight_gpio = -ENOENT;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
 static int lb035q02_panel_spi_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
@@ -295,6 +325,10 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
 		r = lb035q02_probe_pdata(spi);
 		if (r)
 			return r;
+	} else if (spi->dev.of_node) {
+		r = lb035q02_probe_of(spi);
+		if (r)
+			return r;
 	} else {
 		return -ENODEV;
 	}
@@ -346,6 +380,13 @@ static int lb035q02_panel_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id lb035q02_of_match[] = {
+	{ .compatible = "omapdss,lgphilips,lb035q02", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, lb035q02_of_match);
+
 static struct spi_driver lb035q02_spi_driver = {
 	.probe		= lb035q02_panel_spi_probe,
 	.remove		= lb035q02_panel_spi_remove,
@@ -357,6 +398,7 @@ static struct spi_driver lb035q02_spi_driver = {
 
 module_spi_driver(lb035q02_spi_driver);
 
+MODULE_ALIAS("spi:lgphilips,lb035q02");
 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
 MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
 MODULE_LICENSE("GPL");
-- 
1.9.1

Re: [PATCH 2/3] OMAPDSS: panel-lgphilips-lb035q02: Add DT support

[Florian Vaussard]

Hi Tomi,

On 05/15/2014 12:10 PM, Tomi Valkeinen wrote:
> Add DT support for panel-lgphilips-lb035q02.
> 
> We disable the use of the backlight_gpio as it should be handled via
> backlight framework with DT boots.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
>  .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 44 +++++++++++++++++++++-
>  1 file changed, 43 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
> index 6e6acd696a70..76c4fdc51c31 100644
> --- a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
> +++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
> @@ -159,7 +159,8 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
>  	if (omapdss_device_is_enabled(dssdev))
>  		return 0;
>  
> -	in->ops.dpi->set_data_lines(in, ddata->data_lines);
> +	if (ddata->data_lines)
> +		in->ops.dpi->set_data_lines(in, ddata->data_lines);
>  	in->ops.dpi->set_timings(in, &ddata->videomode);
>  
>  	r = in->ops.dpi->enable(in);
> @@ -277,6 +278,35 @@ err_gpio:
>  	return r;
>  }
>  
> +static int lb035q02_probe_of(struct spi_device *spi)
> +{
> +	struct device_node *node = spi->dev.of_node;
> +	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
> +	struct omap_dss_device *in;
> +	struct gpio_desc *gpio;
> +
> +	gpio = devm_gpiod_get(&spi->dev, "enable");
> +	if (IS_ERR(gpio)) {
> +		dev_err(&spi->dev, "failed to parse enable gpio\n");
> +		return PTR_ERR(gpio);
> +	} else {
> +		gpiod_direction_output(gpio, 0);
> +		ddata->enable_gpio = gpio;
> +	}
> +
> +	ddata->backlight_gpio = -ENOENT;
> +
> +	in = omapdss_of_find_source_for_first_ep(node);
> +	if (IS_ERR(in)) {
> +		dev_err(&spi->dev, "failed to find video source\n");
> +		return PTR_ERR(in);
> +	}
> +
> +	ddata->in = in;
> +
> +	return 0;
> +}
> +
>  static int lb035q02_panel_spi_probe(struct spi_device *spi)
>  {
>  	struct panel_drv_data *ddata;
> @@ -295,6 +325,10 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
>  		r = lb035q02_probe_pdata(spi);
>  		if (r)
>  			return r;
> +	} else if (spi->dev.of_node) {
> +		r = lb035q02_probe_of(spi);
> +		if (r)
> +			return r;
>  	} else {
>  		return -ENODEV;
>  	}
> @@ -346,6 +380,13 @@ static int lb035q02_panel_spi_remove(struct spi_device *spi)
>  	return 0;
>  }
>  
> +static const struct of_device_id lb035q02_of_match[] = {
> +	{ .compatible = "omapdss,lgphilips,lb035q02", },
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(of, lb035q02_of_match);
> +
>  static struct spi_driver lb035q02_spi_driver = {
>  	.probe		= lb035q02_panel_spi_probe,
>  	.remove		= lb035q02_panel_spi_remove,
> @@ -357,6 +398,7 @@ static struct spi_driver lb035q02_spi_driver = {
>  

		.of_match_table = lb035q02_of_match,

is missing.

>  module_spi_driver(lb035q02_spi_driver);
>  
> +MODULE_ALIAS("spi:lgphilips,lb035q02");
>  MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
>  MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
>  MODULE_LICENSE("GPL");
> 

Regards,

Florian

Re: [PATCH 2/3] OMAPDSS: panel-lgphilips-lb035q02: Add DT support

[Florian Vaussard]

Hi Tomi,

On 05/15/2014 12:10 PM, Tomi Valkeinen wrote:
> Add DT support for panel-lgphilips-lb035q02.
> 
> We disable the use of the backlight_gpio as it should be handled via
> backlight framework with DT boots.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
>  .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 44 +++++++++++++++++++++-
>  1 file changed, 43 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
> index 6e6acd696a70..76c4fdc51c31 100644
> --- a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
> +++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
> @@ -159,7 +159,8 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
>  	if (omapdss_device_is_enabled(dssdev))
>  		return 0;
>  
> -	in->ops.dpi->set_data_lines(in, ddata->data_lines);
> +	if (ddata->data_lines)
> +		in->ops.dpi->set_data_lines(in, ddata->data_lines);
>  	in->ops.dpi->set_timings(in, &ddata->videomode);
>  
>  	r = in->ops.dpi->enable(in);
> @@ -277,6 +278,35 @@ err_gpio:
>  	return r;
>  }
>  
> +static int lb035q02_probe_of(struct spi_device *spi)
> +{
> +	struct device_node *node = spi->dev.of_node;
> +	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
> +	struct omap_dss_device *in;
> +	struct gpio_desc *gpio;
> +
> +	gpio = devm_gpiod_get(&spi->dev, "enable");
> +	if (IS_ERR(gpio)) {
> +		dev_err(&spi->dev, "failed to parse enable gpio\n");
> +		return PTR_ERR(gpio);
> +	} else {
> +		gpiod_direction_output(gpio, 0);
> +		ddata->enable_gpio = gpio;
> +	}
> +
> +	ddata->backlight_gpio = -ENOENT;
> +
> +	in = omapdss_of_find_source_for_first_ep(node);
> +	if (IS_ERR(in)) {
> +		dev_err(&spi->dev, "failed to find video source\n");
> +		return PTR_ERR(in);
> +	}
> +
> +	ddata->in = in;
> +
> +	return 0;
> +}
> +
>  static int lb035q02_panel_spi_probe(struct spi_device *spi)
>  {
>  	struct panel_drv_data *ddata;
> @@ -295,6 +325,10 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
>  		r = lb035q02_probe_pdata(spi);
>  		if (r)
>  			return r;
> +	} else if (spi->dev.of_node) {
> +		r = lb035q02_probe_of(spi);
> +		if (r)
> +			return r;
>  	} else {
>  		return -ENODEV;
>  	}
> @@ -346,6 +380,13 @@ static int lb035q02_panel_spi_remove(struct spi_device *spi)
>  	return 0;
>  }
>  
> +static const struct of_device_id lb035q02_of_match[] = {
> +	{ .compatible = "omapdss,lgphilips,lb035q02", },
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(of, lb035q02_of_match);
> +
>  static struct spi_driver lb035q02_spi_driver = {
>  	.probe		= lb035q02_panel_spi_probe,
>  	.remove		= lb035q02_panel_spi_remove,
> @@ -357,6 +398,7 @@ static struct spi_driver lb035q02_spi_driver = {
>  

		.of_match_table = lb035q02_of_match,

is missing.

>  module_spi_driver(lb035q02_spi_driver);
>  
> +MODULE_ALIAS("spi:lgphilips,lb035q02");
>  MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
>  MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
>  MODULE_LICENSE("GPL");
> 

Regards,

Florian

Re: [PATCH 2/3] OMAPDSS: panel-lgphilips-lb035q02: Add DT support

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 440 bytes --]

On 20/05/14 13:58, Florian Vaussard wrote:

>>  static struct spi_driver lb035q02_spi_driver = {
>>  	.probe		= lb035q02_panel_spi_probe,
>>  	.remove		= lb035q02_panel_spi_remove,
>> @@ -357,6 +398,7 @@ static struct spi_driver lb035q02_spi_driver = {
>>  
> 
> 		.of_match_table = lb035q02_of_match,
> 
> is missing.

Thanks. I seem to have missed it with the other panels also in the
patches I sent last week.

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 2/3] OMAPDSS: panel-lgphilips-lb035q02: Add DT support

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 440 bytes --]

On 20/05/14 13:58, Florian Vaussard wrote:

>>  static struct spi_driver lb035q02_spi_driver = {
>>  	.probe		= lb035q02_panel_spi_probe,
>>  	.remove		= lb035q02_panel_spi_remove,
>> @@ -357,6 +398,7 @@ static struct spi_driver lb035q02_spi_driver = {
>>  
> 
> 		.of_match_table = lb035q02_of_match,
> 
> is missing.

Thanks. I seem to have missed it with the other panels also in the
patches I sent last week.

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[PATCH 3/3] Doc/DT: Add binding doc for lgphilips,lb035q02.txt

[Tomi Valkeinen]

Add DT bindings documentation for LG.Philips LB035Q02 LCD panel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org
---
 .../bindings/video/lgphilips,lb035q02.txt          | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt

diff --git a/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
new file mode 100644
index 000000000000..1a1e653e5407
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
@@ -0,0 +1,33 @@
+LG.Philips LB035Q02 Panel
+============+
+Required properties:
+- compatible: "lgphilips,lb035q02"
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "lgphilips,lb035q02";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	enable-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
-- 
1.9.1

[PATCH 3/3] Doc/DT: Add binding doc for lgphilips,lb035q02.txt

[Tomi Valkeinen]

Add DT bindings documentation for LG.Philips LB035Q02 LCD panel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org
---
 .../bindings/video/lgphilips,lb035q02.txt          | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt

diff --git a/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
new file mode 100644
index 000000000000..1a1e653e5407
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
@@ -0,0 +1,33 @@
+LG.Philips LB035Q02 Panel
+=========================
+
+Required properties:
+- compatible: "lgphilips,lb035q02"
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "lgphilips,lb035q02";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	enable-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
-- 
1.9.1

Re: [PATCH 3/3] Doc/DT: Add binding doc for lgphilips,lb035q02.txt

[Florian Vaussard]

Hi Tomi,

On 05/15/2014 12:10 PM, Tomi Valkeinen wrote:
> Add DT bindings documentation for LG.Philips LB035Q02 LCD panel.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: devicetree@vger.kernel.org
> ---
>  .../bindings/video/lgphilips,lb035q02.txt          | 33 ++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
> new file mode 100644
> index 000000000000..1a1e653e5407
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
> @@ -0,0 +1,33 @@
> +LG.Philips LB035Q02 Panel
> +============> +
> +Required properties:
> +- compatible: "lgphilips,lb035q02"
> +- enable-gpios: panel enable gpio
> +
> +Optional properties:
> +- label: a symbolic name for the panel
> +
> +Required nodes:
> +- Video port for DPI input
> +
> +Example
> +-------
> +
> +lcd-panel: panel@0 {
> +	compatible = "lgphilips,lb035q02";
> +	reg = <0>;
> +	spi-max-frequency = <100000>;
> +	spi-cpol;
> +	spi-cpha;
> +
> +	label = "lcd";
> +
> +	enable-gpios = <&gpio7 7 0>;
> +
> +	port {
> +		lcd_in: endpoint {
> +			remote-endpoint = <&dpi_out>;
> +		};
> +	};
> +};
> 

The lcd-panel should be a child node of a SPI controller. Maybe this
could be mentioned? Or the example could be more explicit, like:

&mcspi1 {
	lcd-panel: panel@0 {

....

	};
};

Regards,

Florian

Re: [PATCH 3/3] Doc/DT: Add binding doc for lgphilips,lb035q02.txt

[Florian Vaussard]

Hi Tomi,

On 05/15/2014 12:10 PM, Tomi Valkeinen wrote:
> Add DT bindings documentation for LG.Philips LB035Q02 LCD panel.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: devicetree@vger.kernel.org
> ---
>  .../bindings/video/lgphilips,lb035q02.txt          | 33 ++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
> new file mode 100644
> index 000000000000..1a1e653e5407
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
> @@ -0,0 +1,33 @@
> +LG.Philips LB035Q02 Panel
> +=========================
> +
> +Required properties:
> +- compatible: "lgphilips,lb035q02"
> +- enable-gpios: panel enable gpio
> +
> +Optional properties:
> +- label: a symbolic name for the panel
> +
> +Required nodes:
> +- Video port for DPI input
> +
> +Example
> +-------
> +
> +lcd-panel: panel@0 {
> +	compatible = "lgphilips,lb035q02";
> +	reg = <0>;
> +	spi-max-frequency = <100000>;
> +	spi-cpol;
> +	spi-cpha;
> +
> +	label = "lcd";
> +
> +	enable-gpios = <&gpio7 7 0>;
> +
> +	port {
> +		lcd_in: endpoint {
> +			remote-endpoint = <&dpi_out>;
> +		};
> +	};
> +};
> 

The lcd-panel should be a child node of a SPI controller. Maybe this
could be mentioned? Or the example could be more explicit, like:

&mcspi1 {
	lcd-panel: panel@0 {

....

	};
};

Regards,

Florian

Re: [PATCH 0/3] OMAPDSS: DT support for panel-lgphilips-lb035q02

[Florian Vaussard]

Hi Tomi,

On 05/15/2014 12:10 PM, Tomi Valkeinen wrote:
> Hi,
> 
> This adds DT support to panel-lgphilips-lb035q02. Compile tested only.
> 
> This panel is used on some Overo boards (alto35, if I'm not mistaken).
> 

I tested with the Alto35. Using the small fix for patch 2, I was able to
use the panel. I will post the related DTS changes soon.

Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>

>  Tomi
> 
> Tomi Valkeinen (3):
>   OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
>   OMAPDSS: panel-lgphilips-lb035q02: Add DT support
>   Doc/DT: Add binding doc for lgphilips,lb035q02.txt
> 
>  .../bindings/video/lgphilips,lb035q02.txt          | 33 ++++++++++
>  .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 76 +++++++++++++++++-----
>  2 files changed, 94 insertions(+), 15 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
> 

Re: [PATCH 0/3] OMAPDSS: DT support for panel-lgphilips-lb035q02

[Florian Vaussard]

Hi Tomi,

On 05/15/2014 12:10 PM, Tomi Valkeinen wrote:
> Hi,
> 
> This adds DT support to panel-lgphilips-lb035q02. Compile tested only.
> 
> This panel is used on some Overo boards (alto35, if I'm not mistaken).
> 

I tested with the Alto35. Using the small fix for patch 2, I was able to
use the panel. I will post the related DTS changes soon.

Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>

>  Tomi
> 
> Tomi Valkeinen (3):
>   OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
>   OMAPDSS: panel-lgphilips-lb035q02: Add DT support
>   Doc/DT: Add binding doc for lgphilips,lb035q02.txt
> 
>  .../bindings/video/lgphilips,lb035q02.txt          | 33 ++++++++++
>  .../omap2/displays-new/panel-lgphilips-lb035q02.c  | 76 +++++++++++++++++-----
>  2 files changed, 94 insertions(+), 15 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
>