All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gioh Kim <gioh.kim@lge.com>
To: Michal Nazarewicz <mina86@mina86.com>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Marek Szyprowski" <m.szyprowski@samsung.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	"Heesub Shin" <heesub.shin@samsung.com>,
	"Mel Gorman" <mgorman@suse.de>,
	"Johannes Weiner" <hannes@cmpxchg.org>, 이건호 <gunho.lee@lge.com>,
	"'Chanho Min'" <chanho.min@lge.com>
Subject: Re: [RFC PATCH] arm: dma-mapping: fallback allocation for cma failure
Date: Thu, 22 May 2014 13:30:32 +0900	[thread overview]
Message-ID: <537D7D68.4000700@lge.com> (raw)
In-Reply-To: <xa1tmweajy4b.fsf@mina86.com>

I'll resend the patch using git-send-email with your name.
I also hope some ARM-guys took a look at it.


2014-05-22 i??i?? 12:22, Michal Nazarewicz i?' e,?:
> On Thu, May 22 2014, Gioh Kim <gioh.kim@lge.com> wrote:
>> I appreciate your comments.
>> The previous patch was ugly. But now it's beautiful! Just 3 lines!
>>
>> I'm not familiar with kernel patch process.
>> Can I have your name at Signed-off-by: line?
>> What tag do I have to write your name in?
>
> My Signed-off-by line does not apply in this case.
> Documentation/SubmittingPatches describes what Signed-off-by means.
>
> I've added Acked-by below.  You may want to resend this patch using
> a??git-send-emaila??.
>
>> --------------------------------- 8< ----------------------------------------------
>>   From 135c986cfaa5a7291519308b3d47e58bf9f5af25 Mon Sep 17 00:00:00 2001
>> From: Gioh Kim <gioh.kim@lge.com>
>> Date: Tue, 20 May 2014 14:16:20 +0900
>> Subject: [PATCH] arm: dma-mapping: add checking cma area initialized
>>
>> If CMA is turned on and CMA size is set to zero, kernel should
>> behave as if CMA was not enabled at compile time.
>> Every dma allocation should check existence of cma area
>> before requesting memory.
>>
>> Signed-off-by: Gioh Kim <gioh.kim@lge.com>
>> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
>
> Acked-by: Michal Nazarewicz <mina86@mina86.com>
>
> But like before, if someone with more ARM knowledge could take a look at
> it, it would be awesome.
>
>> ---
>>    arch/arm/mm/dma-mapping.c |    7 ++++---
>>    1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
>> index 18e98df..9173a13 100644
>> --- a/arch/arm/mm/dma-mapping.c
>> +++ b/arch/arm/mm/dma-mapping.c
>> @@ -390,12 +390,13 @@ static int __init atomic_pool_init(void)
>>           if (!pages)
>>                   goto no_pages;
>>
>> -       if (IS_ENABLED(CONFIG_DMA_CMA))
>> +       if (dev_get_cma_area(NULL))
>>                   ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
>>                                                 atomic_pool_init);
>>           else
>>                   ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
>>                                              atomic_pool_init);
>> +
>>           if (ptr) {
>>                   int i;
>>
>> @@ -701,7 +702,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
>>                   addr = __alloc_simple_buffer(dev, size, gfp, &page);
>>           else if (!(gfp & __GFP_WAIT))
>>                   addr = __alloc_from_pool(size, &page);
>> -       else if (!IS_ENABLED(CONFIG_DMA_CMA))
>> +       else if (!dev_get_cma_area(dev))
>>                   addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
>>           else
>>                   addr = __alloc_from_contiguous(dev, size, prot, &page, caller);
>> @@ -790,7 +791,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
>>                   __dma_free_buffer(page, size);
>>           } else if (__free_from_pool(cpu_addr, size)) {
>>                   return;
>> -       } else if (!IS_ENABLED(CONFIG_DMA_CMA)) {
>> +       } else if (!dev_get_cma_area(dev)) {
>>                   __dma_free_remap(cpu_addr, size);
>>                   __dma_free_buffer(page, size);
>>           } else {
>> --
>> 1.7.9.5
>

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

WARNING: multiple messages have this Message-ID (diff)
From: Gioh Kim <gioh.kim@lge.com>
To: Michal Nazarewicz <mina86@mina86.com>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Marek Szyprowski" <m.szyprowski@samsung.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	"Heesub Shin" <heesub.shin@samsung.com>,
	"Mel Gorman" <mgorman@suse.de>,
	"Johannes Weiner" <hannes@cmpxchg.org>, 이건호 <gunho.lee@lge.com>,
	"'Chanho Min'" <chanho.min@lge.com>
Subject: Re: [RFC PATCH] arm: dma-mapping: fallback allocation for cma failure
Date: Thu, 22 May 2014 13:30:32 +0900	[thread overview]
Message-ID: <537D7D68.4000700@lge.com> (raw)
In-Reply-To: <xa1tmweajy4b.fsf@mina86.com>

I'll resend the patch using git-send-email with your name.
I also hope some ARM-guys took a look at it.


2014-05-22 오후 12:22, Michal Nazarewicz 쓴 글:
> On Thu, May 22 2014, Gioh Kim <gioh.kim@lge.com> wrote:
>> I appreciate your comments.
>> The previous patch was ugly. But now it's beautiful! Just 3 lines!
>>
>> I'm not familiar with kernel patch process.
>> Can I have your name at Signed-off-by: line?
>> What tag do I have to write your name in?
>
> My Signed-off-by line does not apply in this case.
> Documentation/SubmittingPatches describes what Signed-off-by means.
>
> I've added Acked-by below.  You may want to resend this patch using
> “git-send-email”.
>
>> --------------------------------- 8< ----------------------------------------------
>>   From 135c986cfaa5a7291519308b3d47e58bf9f5af25 Mon Sep 17 00:00:00 2001
>> From: Gioh Kim <gioh.kim@lge.com>
>> Date: Tue, 20 May 2014 14:16:20 +0900
>> Subject: [PATCH] arm: dma-mapping: add checking cma area initialized
>>
>> If CMA is turned on and CMA size is set to zero, kernel should
>> behave as if CMA was not enabled at compile time.
>> Every dma allocation should check existence of cma area
>> before requesting memory.
>>
>> Signed-off-by: Gioh Kim <gioh.kim@lge.com>
>> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
>
> Acked-by: Michal Nazarewicz <mina86@mina86.com>
>
> But like before, if someone with more ARM knowledge could take a look at
> it, it would be awesome.
>
>> ---
>>    arch/arm/mm/dma-mapping.c |    7 ++++---
>>    1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
>> index 18e98df..9173a13 100644
>> --- a/arch/arm/mm/dma-mapping.c
>> +++ b/arch/arm/mm/dma-mapping.c
>> @@ -390,12 +390,13 @@ static int __init atomic_pool_init(void)
>>           if (!pages)
>>                   goto no_pages;
>>
>> -       if (IS_ENABLED(CONFIG_DMA_CMA))
>> +       if (dev_get_cma_area(NULL))
>>                   ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
>>                                                 atomic_pool_init);
>>           else
>>                   ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
>>                                              atomic_pool_init);
>> +
>>           if (ptr) {
>>                   int i;
>>
>> @@ -701,7 +702,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
>>                   addr = __alloc_simple_buffer(dev, size, gfp, &page);
>>           else if (!(gfp & __GFP_WAIT))
>>                   addr = __alloc_from_pool(size, &page);
>> -       else if (!IS_ENABLED(CONFIG_DMA_CMA))
>> +       else if (!dev_get_cma_area(dev))
>>                   addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
>>           else
>>                   addr = __alloc_from_contiguous(dev, size, prot, &page, caller);
>> @@ -790,7 +791,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
>>                   __dma_free_buffer(page, size);
>>           } else if (__free_from_pool(cpu_addr, size)) {
>>                   return;
>> -       } else if (!IS_ENABLED(CONFIG_DMA_CMA)) {
>> +       } else if (!dev_get_cma_area(dev)) {
>>                   __dma_free_remap(cpu_addr, size);
>>                   __dma_free_buffer(page, size);
>>           } else {
>> --
>> 1.7.9.5
>

  reply	other threads:[~2014-05-22  4:30 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-20  5:57 [RFC PATCH] arm: dma-mapping: fallback allocation for cma failure Gioh Kim
2014-05-20  5:57 ` Gioh Kim
2014-05-20  6:52 ` Joonsoo Kim
2014-05-20  6:52   ` Joonsoo Kim
2014-05-20  7:05   ` Gioh Kim
2014-05-20  7:05     ` Gioh Kim
2014-05-20  8:32     ` Joonsoo Kim
2014-05-20  8:32       ` Joonsoo Kim
2014-05-20 23:39       ` Gioh Kim
2014-05-20 23:39         ` Gioh Kim
2014-05-20 18:22   ` Michal Nazarewicz
2014-05-21  0:24     ` Gioh Kim
2014-05-21  0:24       ` Gioh Kim
2014-05-21  8:06     ` Gioh Kim
2014-05-21  8:06       ` Gioh Kim
2014-05-21 20:11       ` Michal Nazarewicz
2014-05-21 20:11         ` Michal Nazarewicz
2014-05-22  1:02         ` Gioh Kim
2014-05-22  1:02           ` Gioh Kim
2014-05-22  3:22           ` Michal Nazarewicz
2014-05-22  3:22             ` Michal Nazarewicz
2014-05-22  4:30             ` Gioh Kim [this message]
2014-05-22  4:30               ` Gioh Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=537D7D68.4000700@lge.com \
    --to=gioh.kim@lge.com \
    --cc=chanho.min@lge.com \
    --cc=gunho.lee@lge.com \
    --cc=hannes@cmpxchg.org \
    --cc=heesub.shin@samsung.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mgorman@suse.de \
    --cc=mina86@mina86.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.