Re: [PATCH v14 2/6] mmc: omap_hsmmc: Extend debugfs by SDIO IRQ handling, runtime state

[Balaji T K <balajitk@ti.com>]

On Thursday 29 May 2014 01:58 PM, Andreas Fenkart wrote:
> Add SDIO IRQ entries to debugfs entry. Note that PSTATE shows current
> state of data lines, incl. SDIO IRQ pending
>
> Signed-off-by: Andreas Fenkart <afenkart@gmail.com>

Thanks Andreas for fixing compilation with !CONFIG_PM[_RUNTIME],

Acked-by: Balaji T K <balajitk@ti.com>

>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 129569d..332d3d2 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -56,6 +56,7 @@
>   #define OMAP_HSMMC_RSP54	0x0118
>   #define OMAP_HSMMC_RSP76	0x011C
>   #define OMAP_HSMMC_DATA		0x0120
> +#define OMAP_HSMMC_PSTATE	0x0124
>   #define OMAP_HSMMC_HCTL		0x0128
>   #define OMAP_HSMMC_SYSCTL	0x012C
>   #define OMAP_HSMMC_STAT		0x0130
> @@ -1815,13 +1816,23 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data)
>   	struct mmc_host *mmc = s->private;
>   	struct omap_hsmmc_host *host = mmc_priv(mmc);
>
> -	seq_printf(s, "mmc%d:\n ctx_loss:\t%d\n\nregs:\n",
> -			mmc->index, host->context_loss);
> +	seq_printf(s, "mmc%d:\n", mmc->index);
> +	seq_printf(s, "sdio irq mode\t%s\n",
> +		   (mmc->caps & MMC_CAP_SDIO_IRQ) ? "interrupt" : "polling");
>
> -	pm_runtime_get_sync(host->dev);
> +	if (mmc->caps & MMC_CAP_SDIO_IRQ) {
> +		seq_printf(s, "sdio irq \t%s\n",
> +			   (host->flags & HSMMC_SDIO_IRQ_ENABLED) ?  "enabled"
> +			   : "disabled");
> +	}
> +	seq_printf(s, "ctx_loss:\t%d\n", host->context_loss);
>
> +	pm_runtime_get_sync(host->dev);
> +	seq_puts(s, "\nregs:\n");
>   	seq_printf(s, "CON:\t\t0x%08x\n",
>   			OMAP_HSMMC_READ(host->base, CON));
> +	seq_printf(s, "PSTATE:\t\t0x%08x\n",
> +		   OMAP_HSMMC_READ(host->base, PSTATE));
>   	seq_printf(s, "HCTL:\t\t0x%08x\n",
>   			OMAP_HSMMC_READ(host->base, HCTL));
>   	seq_printf(s, "SYSCTL:\t\t0x%08x\n",
>