From: preeti@linux.vnet.ibm.com (Preeti U Murthy)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] arm64: kernel: initialize broadcast hrtimer based clock event device
Date: Fri, 30 May 2014 11:31:53 +0530 [thread overview]
Message-ID: <53881ED1.2040907@linux.vnet.ibm.com> (raw)
In-Reply-To: <1401383814-22600-1-git-send-email-lorenzo.pieralisi@arm.com>
On 05/29/2014 10:46 PM, Lorenzo Pieralisi wrote:
> On platforms implementing CPU power management, the CPUidle subsystem
> can allow CPUs to enter idle states where local timers logic is lost on power
> down. To keep the software timers functional the kernel relies on an
> always-on broadcast timer to be present in the platform to relay the
> interrupt signalling the timer expiries.
>
> For platforms implementing CPU core gating that do not implement an always-on
> HW timer or implement it in a broken way, this patch adds code to initialize
> the kernel hrtimer based clock event device upon boot (which can be chosen as
> tick broadcast device by the kernel).
> It relies on a dynamically chosen CPU to be always powered-up. This CPU then
> relays the timer interrupt to CPUs in deep-idle states through its HW local
> timer device.
>
> Having a CPU always-on has implications on power management platform
> capabilities and makes CPUidle suboptimal, since at least a CPU is kept
> always in a shallow idle state by the kernel to relay timer interrupts,
> but at least leaves the kernel with a functional system with some working
> power management capabilities.
>
> The hrtimer based clock event device is unconditionally registered, but
> has the lowest possible rating such that any broadcast-capable HW clock
> event device present will be chosen in preference as the tick broadcast
> device.
>
> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
> Acked-by: Will Deacon <will.deacon@arm.com>
> Acked-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> ---
> changes in v2:
>
> - Reworded the commit log according to reviews
>
> It should be ready to go.
>
> Thanks,
> Lorenzo
>
> arch/arm64/kernel/time.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
> index 6815987..1a7125c 100644
> --- a/arch/arm64/kernel/time.c
> +++ b/arch/arm64/kernel/time.c
> @@ -18,6 +18,7 @@
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include <linux/clockchips.h>
> #include <linux/export.h>
> #include <linux/kernel.h>
> #include <linux/interrupt.h>
> @@ -69,6 +70,8 @@ void __init time_init(void)
> of_clk_init(NULL);
> clocksource_of_init();
>
> + tick_setup_hrtimer_broadcast();
> +
> arch_timer_rate = arch_timer_get_rate();
> if (!arch_timer_rate)
> panic("Unable to initialise architected timer.\n");
>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
WARNING: multiple messages have this Message-ID (diff)
From: Preeti U Murthy <preeti@linux.vnet.ibm.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
will.deacon@arm.com, mark.rutland@arm.com
Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] arm64: kernel: initialize broadcast hrtimer based clock event device
Date: Fri, 30 May 2014 11:31:53 +0530 [thread overview]
Message-ID: <53881ED1.2040907@linux.vnet.ibm.com> (raw)
In-Reply-To: <1401383814-22600-1-git-send-email-lorenzo.pieralisi@arm.com>
On 05/29/2014 10:46 PM, Lorenzo Pieralisi wrote:
> On platforms implementing CPU power management, the CPUidle subsystem
> can allow CPUs to enter idle states where local timers logic is lost on power
> down. To keep the software timers functional the kernel relies on an
> always-on broadcast timer to be present in the platform to relay the
> interrupt signalling the timer expiries.
>
> For platforms implementing CPU core gating that do not implement an always-on
> HW timer or implement it in a broken way, this patch adds code to initialize
> the kernel hrtimer based clock event device upon boot (which can be chosen as
> tick broadcast device by the kernel).
> It relies on a dynamically chosen CPU to be always powered-up. This CPU then
> relays the timer interrupt to CPUs in deep-idle states through its HW local
> timer device.
>
> Having a CPU always-on has implications on power management platform
> capabilities and makes CPUidle suboptimal, since at least a CPU is kept
> always in a shallow idle state by the kernel to relay timer interrupts,
> but at least leaves the kernel with a functional system with some working
> power management capabilities.
>
> The hrtimer based clock event device is unconditionally registered, but
> has the lowest possible rating such that any broadcast-capable HW clock
> event device present will be chosen in preference as the tick broadcast
> device.
>
> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
> Acked-by: Will Deacon <will.deacon@arm.com>
> Acked-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> ---
> changes in v2:
>
> - Reworded the commit log according to reviews
>
> It should be ready to go.
>
> Thanks,
> Lorenzo
>
> arch/arm64/kernel/time.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
> index 6815987..1a7125c 100644
> --- a/arch/arm64/kernel/time.c
> +++ b/arch/arm64/kernel/time.c
> @@ -18,6 +18,7 @@
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include <linux/clockchips.h>
> #include <linux/export.h>
> #include <linux/kernel.h>
> #include <linux/interrupt.h>
> @@ -69,6 +70,8 @@ void __init time_init(void)
> of_clk_init(NULL);
> clocksource_of_init();
>
> + tick_setup_hrtimer_broadcast();
> +
> arch_timer_rate = arch_timer_get_rate();
> if (!arch_timer_rate)
> panic("Unable to initialise architected timer.\n");
>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
next prev parent reply other threads:[~2014-05-30 6:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-29 17:16 [PATCH v2] arm64: kernel: initialize broadcast hrtimer based clock event device Lorenzo Pieralisi
2014-05-29 17:16 ` Lorenzo Pieralisi
2014-05-30 6:01 ` Preeti U Murthy [this message]
2014-05-30 6:01 ` Preeti U Murthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53881ED1.2040907@linux.vnet.ibm.com \
--to=preeti@linux.vnet.ibm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.