All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Tinguely <tinguely@sgi.com>
To: Dave Chinner <david@fromorbit.com>
Cc: xfs@oss.sgi.com
Subject: Re: [PATCH v2 2/7] xfs: add support FALLOC_FL_COLLAPSE_RANGE for fallocate
Date: Sat, 31 May 2014 20:22:44 -0500	[thread overview]
Message-ID: <538A8064.2030304@sgi.com> (raw)
In-Reply-To: <20140531003918.GI14410@dastard>

On 05/30/14 19:39, Dave Chinner wrote:
> On Thu, May 29, 2014 at 09:27:44AM -0500, Mark Tinguely wrote:
>> On 05/27/14 19:29, Dave Chinner wrote:
>>> On Tue, May 27, 2014 at 05:56:54PM -0500, Mark Tinguely wrote:
>>>> A 7-8 hours on spinning rust. This is my burn in test.
>>>
>>> Can you try to narrow the problem down? Otherwise it's going to be a
>>> case of looking for a needle in a haystack....
>>
>> Nod on the needle in a hay stack if it bmbt is really corrupt.
>>
>> I am running fsstress from xfstests with the top commit 9b7f704, and
>> I don't see any newer fsstress patches since then.
>>
>> I moved the test to another box with a kdump that works on top of
>> tree Linux and grabbed a vmcore. I grabbed a metadata dump of the
>> filesystem after the ASSERT. That should give some idea of what
>> inode/block it was looking up.
>>
>> I sent email to Namjae when I first tripped over this problem in
>> late April. No longer on the face of the earth and I can't look at
>> this until the weekend.
>
> No worries - it looks pretty hard to hit, so it's not something we
> urgently need to track down. Any time you can spare to try to narrow
> it down would be great!
>
> Cheers,
>
> Dave.

The xfs_inode thinks there are 11 bmbt entries when there should only be 11:
   i_df = {
     if_bytes = 0xb0,              <- here 11 entries 0x10 bytes long
     if_real_bytes = 0x100,
     if_broot = 0xffff88009f74c680,
     if_broot_bytes = 0x28,
     if_flags = 0x6,
     if_u1 = {
       if_extents = 0xffff88033c44a000,  <-
       if_ext_irec = 0xffff88033c44a000,
       if_data = 0xffff88033c44a000 ""
     },

Looking at the if_extents[]:

crash> rd ffff88033c44a000 32
ffff88033c44a000:  8000000000000200 000000b601800021   ........!.......
ffff88033c44a010:  0000000000004400 000000449a000007   .D..........D...
ffff88033c44a020:  0000000000005200 000002f897e00004   .R..............
ffff88033c44a030:  8000000000005a00 000002f898600033   .Z......3.`.....
ffff88033c44a040:  000000000000c000 000002f89ec00001   ................
ffff88033c44a050:  0000000000015c00 000005fdfba00010   .\..............
ffff88033c44a060:  0000000000017c00 00000eab00400006   .|........@.....
ffff88033c44a070:  000000000001f800 00000ec752c00004   ...........R....
ffff88033c44a080:  0000000000020000 00000e8ae6800004   ................
ffff88033c44a090:  0000000000020800 00000e7167e00004   ...........gq...
ffff88033c44a0a0:  000000000002bfff ffffffc000a00001   ................
                        ^^^^ bad  ^^^^
It appears that current_ext is 10 (11th entry).
The assert is on the bad entry.

xfs_db thinks there are 11 entries:

recs[1-11] = [startoff,startblock,blockcount,extentflag] 
1:[1,372748,33,1] 2:[34,140496,18,0] 3:[52,1557619,53,1] 
4:[105,1557672,27,0] 5:[132,1557699,51,1] 6:[183,1557750,1,0] 
7:[261,3141597,16,0] 8:[277,7690242,6,0] 9:[339,7748246,4,0] 
10:[343,7624500,4,0] 11:[347,7572287,4,0]

xfs_db> fsb 4262789
xfs_db> type text
xfs_db> p
000:  42 4d 41 50 00 00 00 0b ff ff ff ff ff ff ff ff  BMAP............
010:  ff ff ff ff ff ff ff ff 80 00 00 00 00 00 02 00  ................
020:  00 00 00 b6 01 80 00 21 00 00 00 00 00 00 44 00  ..............D.
030:  00 00 00 44 9a 00 00 12 80 00 00 00 00 00 68 00  ...D..........h.
040:  00 00 02 f8 8e 60 00 35 00 00 00 00 00 00 d2 00  .......5........
050:  00 00 02 f8 95 00 00 1b 80 00 00 00 00 01 08 00  ................
060:  00 00 02 f8 98 60 00 33 00 00 00 00 00 01 6e 00  .......3......n.
070:  00 00 02 f8 9e c0 00 01 00 00 00 00 00 02 0a 00  ................
080:  00 00 05 fd fb a0 00 10 00 00 00 00 00 02 2a 00  ................
090:  00 00 0e ab 00 40 00 06 00 00 00 00 00 02 a6 00  ................
0a0:  00 00 0e c7 52 c0 00 04 00 00 00 00 00 02 ae 00  ....R...........
0b0:  00 00 0e 8a e6 80 00 04 00 00 00 00 00 02 b6 00  ................
0c0:  00 00 0e 71 67 e0 00 04 00 00 00 00 00 00 00 00  ...qg...........
0d0:  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
0e0:  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

This xfs_db is before log replay, but it appears that the 3 extent is
missing in the data fork, everything shifted up and a garbage entry in 
entry 11.

--Mark.

_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  reply	other threads:[~2014-06-01  1:22 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-02 14:29 [PATCH v2 2/7] xfs: add support FALLOC_FL_COLLAPSE_RANGE for fallocate Namjae Jeon
2013-09-02 14:29 ` Namjae Jeon
2014-05-27 22:20 ` Mark Tinguely
2014-05-27 22:51   ` Dave Chinner
2014-05-27 22:56     ` Mark Tinguely
2014-05-28  0:29       ` Dave Chinner
2014-05-28 22:48         ` Dave Chinner
2014-05-29 14:27         ` Mark Tinguely
2014-05-31  0:39           ` Dave Chinner
2014-06-01  1:22             ` Mark Tinguely [this message]
2014-06-01  1:25               ` Mark Tinguely
2014-06-01 22:43               ` Dave Chinner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=538A8064.2030304@sgi.com \
    --to=tinguely@sgi.com \
    --cc=david@fromorbit.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.