* tslib calibration [not found] <132829550.21635355.1398178495469.JavaMail.root@wayne.edu> @ 2014-04-22 15:01 ` Giri Babu Sinnapolu 2014-04-23 20:04 ` tslib calibration issue Giri Babu Sinnapolu 0 siblings, 1 reply; 14+ messages in thread From: Giri Babu Sinnapolu @ 2014-04-22 15:01 UTC (permalink / raw) To: meta-freescale [-- Attachment #1: Type: text/plain, Size: 615 bytes --] Dear Sir/madam, I am giri,i am working on a center stack project i am using imx6qsabresd,yacto=qt4e-demo-image,master. When i boot the image on the target i receive an output smarthome demo xres=800 and yres=460 but in my dispay i receive booting and then it shows TSLIB CALIBRATION UTILITY and TSLIB CROSSHAIR CALIBRATION if i touch the screen to calibrate it does not work ,it does not detect, i am using the freescale mcimx lvds display, what changes i have to do and where i have to do in order to make the display working. kindly find my target boot file attached. thanks! giri babu.s [-- Attachment #2: giri1.odt --] [-- Type: application/vnd.oasis.opendocument.text, Size: 31159 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* tslib calibration issue 2014-04-22 15:01 ` tslib calibration Giri Babu Sinnapolu @ 2014-04-23 20:04 ` Giri Babu Sinnapolu 2014-04-23 20:36 ` Daiane.Angolini 0 siblings, 1 reply; 14+ messages in thread From: Giri Babu Sinnapolu @ 2014-04-23 20:04 UTC (permalink / raw) To: meta-freescale [-- Attachment #1: Type: text/plain, Size: 617 bytes --] Dear Sir/madam, I am giri,i am working on a center stack project i am using imx6qsabresd,yacto=qt4e-demo-image,master. When i boot the image on the target i receive an output smarthome demo xres=800 and yres=460 but in my dispay i receive booting and then it shows TSLIB CALIBRATION UTILITY and TSLIB CROSSHAIR CALIBRATION if i touch the screen to calibrate it does not work ,it does not detect, i am using the freescale mcimx lvds display, what changes i have to do and where i have to do in order to make the display working. kindly find my target boot file attached. thanks! giri babu.s [-- Attachment #2: giri1.odt --] [-- Type: application/vnd.oasis.opendocument.text, Size: 31159 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-04-23 20:04 ` tslib calibration issue Giri Babu Sinnapolu @ 2014-04-23 20:36 ` Daiane.Angolini 2014-04-23 20:51 ` Giri Babu Sinnapolu 2014-05-20 13:41 ` Marco 0 siblings, 2 replies; 14+ messages in thread From: Daiane.Angolini @ 2014-04-23 20:36 UTC (permalink / raw) To: Giri Babu Sinnapolu, meta-freescale@yoctoproject.org > -----Original Message----- > From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale- > bounces@yoctoproject.org] On Behalf Of Giri Babu Sinnapolu > Sent: Wednesday, April 23, 2014 5:05 PM > To: meta-freescale@yoctoproject.org > Subject: [meta-freescale] tslib calibration issue > > > Dear Sir/madam, > > > I am giri,i am working on a center stack project i am using > imx6qsabresd,yacto=qt4e-demo-image,master. > > When i boot the image on the target i receive an output smarthome demo > xres=800 and yres=460 but in my dispay i receive booting and then it shows > TSLIB CALIBRATION UTILITY and TSLIB CROSSHAIR CALIBRATION if i touch the > screen to calibrate it does not work ,it does not detect, i am using the > freescale mcimx lvds display, what changes i have to do and where i have to > do in order to make the display working. kindly find my target boot file > attached. I don´t think LVDS should be calibrated. And, I almost remember TSLIB does not work on imx6. (would need to use xinput instead....) What is your goal? Daiane > > thanks! > giri babu.s ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-04-23 20:36 ` Daiane.Angolini @ 2014-04-23 20:51 ` Giri Babu Sinnapolu 2014-04-23 21:01 ` Giri Babu Sinnapolu 2014-05-20 13:41 ` Marco 1 sibling, 1 reply; 14+ messages in thread From: Giri Babu Sinnapolu @ 2014-04-23 20:51 UTC (permalink / raw) To: Daiane Angolini; +Cc: meta-freescale Hi, Thanks for replying , i want the smart home code or any qt code running on imx6sabresd using the lvds display or hdmi display i have both of them, do kindly let me know what changes i have to make and how do i install xinput to make it work. thnaks! giri ----- Original Message ----- From: "Daiane Angolini" <Daiane.Angolini@freescale.com> To: "Giri Babu Sinnapolu" <giri.babu.sinnapolu@wayne.edu>, meta-freescale@yoctoproject.org Sent: Wednesday, April 23, 2014 4:36:04 PM Subject: RE: [meta-freescale] tslib calibration issue > -----Original Message----- > From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale- > bounces@yoctoproject.org] On Behalf Of Giri Babu Sinnapolu > Sent: Wednesday, April 23, 2014 5:05 PM > To: meta-freescale@yoctoproject.org > Subject: [meta-freescale] tslib calibration issue > > > Dear Sir/madam, > > > I am giri,i am working on a center stack project i am using > imx6qsabresd,yacto=qt4e-demo-image,master. > > When i boot the image on the target i receive an output smarthome demo > xres=800 and yres=460 but in my dispay i receive booting and then it shows > TSLIB CALIBRATION UTILITY and TSLIB CROSSHAIR CALIBRATION if i touch the > screen to calibrate it does not work ,it does not detect, i am using the > freescale mcimx lvds display, what changes i have to do and where i have to > do in order to make the display working. kindly find my target boot file > attached. I don´t think LVDS should be calibrated. And, I almost remember TSLIB does not work on imx6. (would need to use xinput instead....) What is your goal? Daiane > > thanks! > giri babu.s ^ permalink raw reply [flat|nested] 14+ messages in thread
* tslib calibration issue 2014-04-23 20:51 ` Giri Babu Sinnapolu @ 2014-04-23 21:01 ` Giri Babu Sinnapolu 2014-04-23 21:02 ` Giri Babu Sinnapolu 0 siblings, 1 reply; 14+ messages in thread From: Giri Babu Sinnapolu @ 2014-04-23 21:01 UTC (permalink / raw) To: Daiane Angolini; +Cc: meta-freescale Hi, Thanks for replying , i want the smart home code or any qt code running on imx6sabresd using the lvds display or hdmi display i have both of them, do kindly let me know what changes i have to make and how do i install xinput to make it work. thnaks! giri ----- Original Message ----- From: "Daiane Angolini" <Daiane.Angolini@freescale.com> To: "Giri Babu Sinnapolu" <giri.babu.sinnapolu@wayne.edu>, meta-freescale@yoctoproject.org Sent: Wednesday, April 23, 2014 4:36:04 PM Subject: RE: [meta-freescale] tslib calibration issue > -----Original Message----- > From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale- > bounces@yoctoproject.org] On Behalf Of Giri Babu Sinnapolu > Sent: Wednesday, April 23, 2014 5:05 PM > To: meta-freescale@yoctoproject.org > Subject: [meta-freescale] tslib calibration issue > > > Dear Sir/madam, > > > I am giri,i am working on a center stack project i am using > imx6qsabresd,yacto=qt4e-demo-image,master. > > When i boot the image on the target i receive an output smarthome demo > xres=800 and yres=460 but in my dispay i receive booting and then it shows > TSLIB CALIBRATION UTILITY and TSLIB CROSSHAIR CALIBRATION if i touch the > screen to calibrate it does not work ,it does not detect, i am using the > freescale mcimx lvds display, what changes i have to do and where i have to > do in order to make the display working. kindly find my target boot file > attached. I don´t think LVDS should be calibrated. And, I almost remember TSLIB does not work on imx6. (would need to use xinput instead....) What is your goal? Daiane > > thanks! > giri babu.s ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-04-23 21:01 ` Giri Babu Sinnapolu @ 2014-04-23 21:02 ` Giri Babu Sinnapolu 0 siblings, 0 replies; 14+ messages in thread From: Giri Babu Sinnapolu @ 2014-04-23 21:02 UTC (permalink / raw) To: Daiane Angolini; +Cc: meta-freescale Hi, Thanks for replying , i want the smart home code or any qt code running on imx6sabresd using the lvds display or hdmi display i have both of them, do kindly let me know what changes i have to make and how do i install xinput to make it work. thnaks! giri ----- Original Message ----- From: "Daiane Angolini" <Daiane.Angolini@freescale.com> To: "Giri Babu Sinnapolu" <giri.babu.sinnapolu@wayne.edu>, meta-freescale@yoctoproject.org Sent: Wednesday, April 23, 2014 4:36:04 PM Subject: RE: [meta-freescale] tslib calibration issue > -----Original Message----- > From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale- > bounces@yoctoproject.org] On Behalf Of Giri Babu Sinnapolu > Sent: Wednesday, April 23, 2014 5:05 PM > To: meta-freescale@yoctoproject.org > Subject: [meta-freescale] tslib calibration issue > > > Dear Sir/madam, > > > I am giri,i am working on a center stack project i am using > imx6qsabresd,yacto=qt4e-demo-image,master. > > When i boot the image on the target i receive an output smarthome demo > xres=800 and yres=460 but in my dispay i receive booting and then it shows > TSLIB CALIBRATION UTILITY and TSLIB CROSSHAIR CALIBRATION if i touch the > screen to calibrate it does not work ,it does not detect, i am using the > freescale mcimx lvds display, what changes i have to do and where i have to > do in order to make the display working. kindly find my target boot file > attached. I don´t think LVDS should be calibrated. And, I almost remember TSLIB does not work on imx6. (would need to use xinput instead....) What is your goal? Daiane > > thanks! > giri babu.s ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-04-23 20:36 ` Daiane.Angolini 2014-04-23 20:51 ` Giri Babu Sinnapolu @ 2014-05-20 13:41 ` Marco 2014-05-20 14:05 ` Daiane Angolini 1 sibling, 1 reply; 14+ messages in thread From: Marco @ 2014-05-20 13:41 UTC (permalink / raw) To: meta-freescale@yoctoproject.org Il 23/04/2014 22:36, Daiane.Angolini@freescale.com ha scritto: > > I don´t think LVDS should be calibrated. > > And, I almost remember TSLIB does not work on imx6. (would need to use xinput instead....) > > What is your goal? > > Daiane Hi Daiane, I used iMX6DLSABRESD with dora and ts_calibrate works perfectly. Today I'm testing with daisy and ts_calibrate doesn't work, ts_print doesn't work, only ts_print_raw is working. I have set by default TSLIB_TSDEVICE=/dev/input/touchscreen0 Do you have any clue? Ciao -- Marco Cavallini | KOAN sas | Bergamo - Italia embedded and real-time software engineering Phone:+39-035-255.235 - Fax:+39-178-22.39.748 http://www.KoanSoftware.com ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-05-20 13:41 ` Marco @ 2014-05-20 14:05 ` Daiane Angolini 2014-05-20 14:22 ` Marco 0 siblings, 1 reply; 14+ messages in thread From: Daiane Angolini @ 2014-05-20 14:05 UTC (permalink / raw) To: koansoftware; +Cc: meta-freescale@yoctoproject.org > I used iMX6DLSABRESD with dora and ts_calibrate works perfectly. > > Today I'm testing with daisy and ts_calibrate doesn't work, ts_print doesn't > work, only ts_print_raw is working. > I have set by default TSLIB_TSDEVICE=/dev/input/touchscreen0 > > Do you have any clue? Would you mind to double check if this is due to change in kernel version or in YP branch? Daiane ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-05-20 14:05 ` Daiane Angolini @ 2014-05-20 14:22 ` Marco 2014-05-20 15:07 ` Otavio Salvador 0 siblings, 1 reply; 14+ messages in thread From: Marco @ 2014-05-20 14:22 UTC (permalink / raw) To: meta-freescale@yoctoproject.org Il 20/05/2014 16:05, Daiane Angolini ha scritto: >> I used iMX6DLSABRESD with dora and ts_calibrate works perfectly. >> >> Today I'm testing with daisy and ts_calibrate doesn't work, ts_print doesn't >> work, only ts_print_raw is working. >> I have set by default TSLIB_TSDEVICE=/dev/input/touchscreen0 >> >> Do you have any clue? > > Would you mind to double check if this is due to change in kernel > version or in YP branch? > Daiane, Which test are you referring to? I suspect that from the kernel side all is ok because I get data doing 'cat /dev/input/touchscreen0' and ts_print_raw. -- Marco Cavallini | KOAN sas | Bergamo - Italia embedded and real-time software engineering Phone:+39-035-255.235 - Fax:+39-178-22.39.748 http://www.KoanSoftware.com ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-05-20 14:22 ` Marco @ 2014-05-20 15:07 ` Otavio Salvador 2014-06-09 10:08 ` Marco 0 siblings, 1 reply; 14+ messages in thread From: Otavio Salvador @ 2014-05-20 15:07 UTC (permalink / raw) To: Marco Cavallini; +Cc: meta-freescale@yoctoproject.org On Tue, May 20, 2014 at 11:22 AM, Marco <koansoftware@gmail.com> wrote: > Il 20/05/2014 16:05, Daiane Angolini ha scritto: > >>> I used iMX6DLSABRESD with dora and ts_calibrate works perfectly. >>> >>> Today I'm testing with daisy and ts_calibrate doesn't work, ts_print >>> doesn't >>> work, only ts_print_raw is working. >>> I have set by default TSLIB_TSDEVICE=/dev/input/touchscreen0 >>> >>> Do you have any clue? >> >> >> Would you mind to double check if this is due to change in kernel >> version or in YP branch? >> > > Daiane, > Which test are you referring to? > I suspect that from the kernel side all is ok because I get data doing 'cat > /dev/input/touchscreen0' and ts_print_raw. I recall a mismatch in evdev api versioning and tslib. Take a look in the source to confirm this is not the case. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-05-20 15:07 ` Otavio Salvador @ 2014-06-09 10:08 ` Marco 2014-06-09 12:12 ` Otavio Salvador 0 siblings, 1 reply; 14+ messages in thread From: Marco @ 2014-06-09 10:08 UTC (permalink / raw) To: meta-freescale@yoctoproject.org Il 20/05/2014 17:07, Otavio Salvador ha scritto: > On Tue, May 20, 2014 at 11:22 AM, Marco <koansoftware@gmail.com> wrote: >> Il 20/05/2014 16:05, Daiane Angolini ha scritto: >> >>>> I used iMX6DLSABRESD with dora and ts_calibrate works perfectly. >>>> >>>> Today I'm testing with daisy and ts_calibrate doesn't work, ts_print >>>> doesn't >>>> work, only ts_print_raw is working. >>>> I have set by default TSLIB_TSDEVICE=/dev/input/touchscreen0 >>>> >>>> Do you have any clue? >>> >>> >>> Would you mind to double check if this is due to change in kernel >>> version or in YP branch? >>> >> >> Daiane, >> Which test are you referring to? >> I suspect that from the kernel side all is ok because I get data doing 'cat >> /dev/input/touchscreen0' and ts_print_raw. > > I recall a mismatch in evdev api versioning and tslib. Take a look in > the source to confirm this is not the case. > Otavio I am using 'daisy' branch and minimal-image with the following (no X11) IMAGE_INSTALL_append += "gcc g++ binutils libgcc libgcc-dev libstdc++ libstdc++-dev libstdc++-staticdev \ tslib-conf tslib-tests tslib-calibrate openssh-sftp-server alsa-lib alsa-tools alsa-state alsa-utils-alsaconf \ tslib evtest dbus nano qtbase qtbase-fonts qtbase-plugins qtbase-examples cinematicexperience gstreamer \ cairo pango fontconfig freetype pulseaudio" DISTRO_FEATURES_remove = "x11 wayland" root@imx6dlsabresd:~# evtest /dev/input/touchscreen0 Input driver version is 1.0.1 Input device ID: bus 0x18 vendor 0xeef product 0x20 version 0x1 Input device name: "eGalax Touch Screen" Supported events: Event type 0 (Sync) Event type 1 (Key) Event code 330 (Touch) Event type 3 (Absolute) Event code 0 (X) Value 0 Min 0 Max 32767 .snip. root@imx6dlsabresd:~# evtest-capture Available devices: /dev/input/event0: eGalax Touch Screen /dev/input/event1: max11801_ts /dev/input/event2: isl29023 light sensor /dev/input/event3: mag3110 /dev/input/event4: mma845x /dev/input/event5: WM8962 Beep Generator /dev/input/event6: wm8962-audio AMIC /dev/input/event7: wm8962-audio Headphone Jack /dev/input/event8: gpio-keys.27 Select the device event number [0-8]: 0 Writing to 'evtest-capture.xml' I haven't found any recent modification in evdev nor in tslib. Ciao -- Marco Cavallini | KOAN sas | Bergamo - Italia embedded and real-time software engineering Phone:+39-035-255.235 - Fax:+39-178-22.39.748 http://www.KoanSoftware.com ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-06-09 10:08 ` Marco @ 2014-06-09 12:12 ` Otavio Salvador 2014-06-09 13:07 ` Marco 0 siblings, 1 reply; 14+ messages in thread From: Otavio Salvador @ 2014-06-09 12:12 UTC (permalink / raw) To: Marco Cavallini; +Cc: meta-freescale@yoctoproject.org Hello Marco, On Mon, Jun 9, 2014 at 7:08 AM, Marco <koansoftware@gmail.com> wrote: > I am using 'daisy' branch and minimal-image with the following (no X11) > > IMAGE_INSTALL_append += "gcc g++ binutils libgcc libgcc-dev libstdc++ > libstdc++-dev libstdc++-staticdev \ > tslib-conf tslib-tests tslib-calibrate openssh-sftp-server alsa-lib > alsa-tools alsa-state alsa-utils-alsaconf \ > tslib evtest dbus nano qtbase qtbase-fonts qtbase-plugins qtbase-examples > cinematicexperience gstreamer \ > cairo pango fontconfig freetype pulseaudio" > DISTRO_FEATURES_remove = "x11 wayland" > > root@imx6dlsabresd:~# evtest /dev/input/touchscreen0 > Input driver version is 1.0.1 > Input device ID: bus 0x18 vendor 0xeef product 0x20 version 0x1 > Input device name: "eGalax Touch Screen" > Supported events: > Event type 0 (Sync) > Event type 1 (Key) > Event code 330 (Touch) > Event type 3 (Absolute) > Event code 0 (X) > Value 0 > Min 0 > Max 32767 > .snip. > > root@imx6dlsabresd:~# evtest-capture > Available devices: > /dev/input/event0: eGalax Touch Screen > /dev/input/event1: max11801_ts > /dev/input/event2: isl29023 light sensor > /dev/input/event3: mag3110 > /dev/input/event4: mma845x > /dev/input/event5: WM8962 Beep Generator > /dev/input/event6: wm8962-audio AMIC > /dev/input/event7: wm8962-audio Headphone Jack > /dev/input/event8: gpio-keys.27 > Select the device event number [0-8]: 0 > Writing to 'evtest-capture.xml' > > I haven't found any recent modification in evdev nor in tslib. Sorry but I didn't grasp what you're after. Could you please clarify? -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-06-09 12:12 ` Otavio Salvador @ 2014-06-09 13:07 ` Marco 2014-06-11 14:20 ` Marco 0 siblings, 1 reply; 14+ messages in thread From: Marco @ 2014-06-09 13:07 UTC (permalink / raw) To: meta-freescale@yoctoproject.org Il 09/06/2014 14:12, Otavio Salvador ha scritto: > Hello Marco, > >> I haven't found any recent modification in evdev nor in tslib. > > Sorry but I didn't grasp what you're after. Could you please clarify? > Dear Otavio, I am building minimal-image for imx6dlsabresd. When I used branch dora the tslib and ts_calibrate worked. Now using daisy ts_calibrate doesn't work, ts_print doesn't work, only ts_print_raw is working. It has set by default TSLIB_TSDEVICE=/dev/input/touchscreen0 What have you changed in daisy that broke the ts_* ? Build Configuration: BB_VERSION = "1.22.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "Ubuntu-12.04" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "imx6dlsabresd" DISTRO = "poky" DISTRO_VERSION = "1.6" TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa9" TARGET_FPU = "vfp-neon" meta meta-yocto meta-yocto-bsp = "daisy:62b1fef7875a6f9c55344fa6bcc7d4b6672eac1f" meta-oe = "daisy:dca466c074c9a35bc0133e7e0d65cca0731e2acf" meta-fsl-arm = "daisy:f5bf277a5a5fba2c3b64ed7d2dbec1903d96386b" meta-fsl-demos = "daisy:27fdb2f2642ecd55d5633bde880dd4c37acd0d42" meta-qt5 = "daisy:46251050c7d3dca4b2425fea24269c2cd9053f58" Ciao -- Marco Cavallini | KOAN sas | Bergamo - Italia embedded and real-time software engineering Phone:+39-035-255.235 - Fax:+39-178-22.39.748 http://www.KoanSoftware.com ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: tslib calibration issue 2014-06-09 13:07 ` Marco @ 2014-06-11 14:20 ` Marco 0 siblings, 0 replies; 14+ messages in thread From: Marco @ 2014-06-11 14:20 UTC (permalink / raw) To: meta-freescale@yoctoproject.org Il 09/06/2014 15:07, Marco ha scritto: > Il 09/06/2014 14:12, Otavio Salvador ha scritto: >> Hello Marco, >> > >>> I haven't found any recent modification in evdev nor in tslib. >> >> Sorry but I didn't grasp what you're after. Could you please clarify? >> > > Dear Otavio, > I am building minimal-image for imx6dlsabresd. > When I used branch dora the tslib and ts_calibrate worked. > Now using daisy ts_calibrate doesn't work, ts_print doesn't work, only > ts_print_raw is working. > It has set by default TSLIB_TSDEVICE=/dev/input/touchscreen0 > > What have you changed in daisy that broke the ts_* ? > > Build Configuration: > BB_VERSION = "1.22.0" > BUILD_SYS = "x86_64-linux" > NATIVELSBSTRING = "Ubuntu-12.04" > TARGET_SYS = "arm-poky-linux-gnueabi" > MACHINE = "imx6dlsabresd" > DISTRO = "poky" > DISTRO_VERSION = "1.6" > TUNE_FEATURES = "armv7a vfp neon callconvention-hard cortexa9" > TARGET_FPU = "vfp-neon" > meta > meta-yocto > meta-yocto-bsp = "daisy:62b1fef7875a6f9c55344fa6bcc7d4b6672eac1f" > meta-oe = "daisy:dca466c074c9a35bc0133e7e0d65cca0731e2acf" > meta-fsl-arm = "daisy:f5bf277a5a5fba2c3b64ed7d2dbec1903d96386b" > meta-fsl-demos = "daisy:27fdb2f2642ecd55d5633bde880dd4c37acd0d42" > meta-qt5 = "daisy:46251050c7d3dca4b2425fea24269c2cd9053f58" > > Ciao I verified that probably the only change in the ts* chain is the kernel, so I suppose a problem in DT. What do you think? TIA -- Marco ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2014-06-11 14:20 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <132829550.21635355.1398178495469.JavaMail.root@wayne.edu>
2014-04-22 15:01 ` tslib calibration Giri Babu Sinnapolu
2014-04-23 20:04 ` tslib calibration issue Giri Babu Sinnapolu
2014-04-23 20:36 ` Daiane.Angolini
2014-04-23 20:51 ` Giri Babu Sinnapolu
2014-04-23 21:01 ` Giri Babu Sinnapolu
2014-04-23 21:02 ` Giri Babu Sinnapolu
2014-05-20 13:41 ` Marco
2014-05-20 14:05 ` Daiane Angolini
2014-05-20 14:22 ` Marco
2014-05-20 15:07 ` Otavio Salvador
2014-06-09 10:08 ` Marco
2014-06-09 12:12 ` Otavio Salvador
2014-06-09 13:07 ` Marco
2014-06-11 14:20 ` Marco
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.