Re: [PATCH v6 3/7] mfd: AXP20x: Add bindings documentation

[Boris BREZILLON <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

Hello,

On 19/05/2014 21:47, Carlo Caione wrote:
> Bindings documentation for the AXP20x driver. In this file also
> sub-nodes are documented.

I think this patch has been forgotten (I didn't find it in linus' tree
or linux-next tree).

Best Regards,

Boris

>
> Signed-off-by: Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>
> Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/mfd/axp20x.txt | 93 ++++++++++++++++++++++++
>  1 file changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
> new file mode 100644
> index 0000000..cc9e01b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -0,0 +1,93 @@
> +AXP202/AXP209 device tree bindings
> +
> +The axp20x family current members :-
> +axp202 (X-Powers)
> +axp209 (X-Powers)
> +
> +Required properties:
> +- compatible: "x-powers,axp202" or "x-powers,axp209"
> +- reg: The I2C slave address for the AXP chip
> +- interrupt-parent: The parent interrupt controller
> +- interrupts: Interrupt specifiers for interrupt sources
> +- interrupt-controller: axp20x has its own internal IRQs
> +- #interrupt-cells: Should be set to 1
> +- acin-supply: The input supply for LDO1
> +- vin2-supply: The input supply for DCDC2
> +- vin3-supply: The input supply for DCDC3
> +- ldo24in-supply: The input supply for LDO2, LDO4
> +- ldo3in-supply: The input supply for LDO3
> +- ldo5in-supply: The input supply for LDO5
> +
> +- regulators: A node that houses a sub-node for each regulator. The regulators are
> +	      bound using their name as listed here: dcdc2, dcdc3, ldo1, ldo2,
> +	      ldo3, ldo4, ldo5.  The bindings details of individual regulator
> +	      device can be found in:
> +	      Documentation/devicetree/bindings/regulator/regulator.txt with
> +	      the exception of x-powers,dcdc-freq
> +- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
> +		      (range: 750-1875). Default: 1.5MHz
> +
> +Optional properties for DCDCs:
> +- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO mode
> +			  Default: AUTO mode
> +
> +Example:
> +
> +axp209: pmic@34 {
> +	compatible = "x-powers,axp209";
> +	reg = <0x34>;
> +	interrupt-parent = <&nmi_intc>;
> +	interrupts = <0 8>;
> +
> +	interrupt-controller;
> +	#interrupt-cells = <1>;
> +
> +	acin-supply = <&axp_ipsout_reg>;
> +	vin2-supply = <&axp_ipsout_reg>;
> +	vin3-supply = <&axp_ipsout_reg>;
> +	ldo24in-supply = <&axp_ipsout_reg>;
> +	ldo3in-supply = <&axp_ipsout_reg>;
> +	ldo5in-supply = <&axp_ipsout_reg>;
> +
> +	regulators {
> +		x-powers,dcdc-freq = <1500>;
> +
> +		axp_vcore_reg: dcdc2 {
> +			regulator-min-microvolt = <700000>;
> +			regulator-max-microvolt = <2275000>;
> +			regulator-always-on;
> +		};
> +
> +		axp_ddr_reg: dcdc3 {
> +			regulator-min-microvolt = <700000>;
> +			regulator-max-microvolt = <3500000>;
> +			regulator-always-on;
> +		};
> +
> +		axp_rtc_reg: ldo1 {
> +			regulator-always-on;
> +		};
> +
> +		axp_analog_reg: ldo2 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
> +		axp_pll_reg: ldo3 {
> +			regulator-min-microvolt = <700000>;
> +			regulator-max-microvolt = <3500000>;
> +		};
> +
> +		axp_hdmi_reg: ldo4 {
> +			regulator-min-microvolt = <1250000>;
> +			regulator-max-microvolt = <3300000>;
> +		};
> +
> +		axp_mic_reg: ldo5 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <3300000>;
> +		};
> +	};
> +};
> +

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com