[PATCH 00/10] Support for 180 degree HW rotation

[PATCH 00/10] Support for 180 degree HW rotation

[sonika.jindal]

From: Sonika Jindal <sonika.jindal@intel.com>

Enables 180 degree rotation for sprite and primary planes.
Updated the primary plane rotation support as per the new universal plane
design.

Most of these patches were already reviewed in intel-gfx in February 2014 thats
why there is version history in few of them.

Testcase: kms_rotation_crc
This igt can be extended for clipped rotation cases. Right it only tests 180
degree rotation for sprite and primary plane with crc check.

Sonika Jindal (1):
  drm/i915: Add 180 degree primary plane rotation support

Ville Syrjälä (9):
  drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
  drm: Add support_bits parameter to drm_property_create_bitmask()
  drm: Add drm_mode_create_rotation_property()
  drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
  drm: Add drm_rect rotation functions
  drm: Add drm_rotation_simplify()
  drm/i915: Add 180 degree sprite rotation support
  drm/i915: Make intel_plane_restore() return an error
  drm/i915: Add rotation property for sprites

 drivers/gpu/drm/drm_crtc.c           |   66 +++++++++++++++-
 drivers/gpu/drm/drm_rect.c           |  140 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_dma.c      |   17 +++++
 drivers/gpu/drm/i915/i915_drv.h      |    1 +
 drivers/gpu/drm/i915/i915_reg.h      |    4 +
 drivers/gpu/drm/i915/intel_display.c |   91 +++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_drv.h     |    3 +-
 drivers/gpu/drm/i915/intel_pm.c      |    8 ++
 drivers/gpu/drm/i915/intel_sprite.c  |   93 ++++++++++++++++++++--
 drivers/gpu/drm/omapdrm/omap_drv.h   |    7 --
 drivers/gpu/drm/omapdrm/omap_plane.c |   17 ++---
 include/drm/drm_crtc.h               |   15 +++-
 include/drm/drm_rect.h               |    6 ++
 13 files changed, 433 insertions(+), 35 deletions(-)

-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 01/10] drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h

[sonika.jindal]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

The rotation property stuff should be standardized among all drivers.
Move the bits to drm_crtc.h from omap_drv.h.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/omapdrm/omap_drv.h |    7 -------
 include/drm/drm_crtc.h             |    8 ++++++++
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 284b80f..b08a450 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -119,13 +119,6 @@ struct omap_drm_private {
 	struct omap_drm_irq error_handler;
 };
 
-/* this should probably be in drm-core to standardize amongst drivers */
-#define DRM_ROTATE_0	0
-#define DRM_ROTATE_90	1
-#define DRM_ROTATE_180	2
-#define DRM_ROTATE_270	3
-#define DRM_REFLECT_X	4
-#define DRM_REFLECT_Y	5
 
 #ifdef CONFIG_DEBUG_FS
 int omap_debugfs_init(struct drm_minor *minor);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 4ee7e26..bfc7235 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -75,6 +75,14 @@ static inline uint64_t I642U64(int64_t val)
 	return (uint64_t)*((uint64_t *)&val);
 }
 
+/* rotation property bits */
+#define DRM_ROTATE_0	0
+#define DRM_ROTATE_90	1
+#define DRM_ROTATE_180	2
+#define DRM_ROTATE_270	3
+#define DRM_REFLECT_X	4
+#define DRM_REFLECT_Y	5
+
 enum drm_connector_force {
 	DRM_FORCE_UNSPECIFIED,
 	DRM_FORCE_OFF,
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 02/10] drm: Add support_bits parameter to drm_property_create_bitmask()

[sonika.jindal]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Make drm_property_create_bitmask() a bit more generic by allowing the
caller to specify which bits are in fact supported. This allows multiple
callers to use the same enum list, but still create different versions
of the same property with different list of supported bits.

v2: Populate values[] array as non-sparse
    Make supported_bits 64bit
    Fix up omapdrm call site (Rob)

Cc: Tomi Valkeinen <tomi.valkeinen at ti.com>
Cc: Rob Clark <robdclark at gmail.com>
Cc: Sagar Kamble <sagar.a.kamble at intel.com>
Cc: dri-devel at lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/drm_crtc.c           |   17 +++++++++++++----
 drivers/gpu/drm/omapdrm/omap_plane.c |    5 ++++-
 include/drm/drm_crtc.h               |    3 ++-
 3 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 41c7212..2fbee61 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -3395,19 +3395,28 @@ EXPORT_SYMBOL(drm_property_create_enum);
 struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 					 int flags, const char *name,
 					 const struct drm_prop_enum_list *props,
-					 int num_values)
+					 int num_props,
+					 uint64_t supported_bits)
 {
 	struct drm_property *property;
-	int i, ret;
+	int i, ret, index = 0;
+	int num_values = hweight64(supported_bits);
 
 	flags |= DRM_MODE_PROP_BITMASK;
 
 	property = drm_property_create(dev, flags, name, num_values);
 	if (!property)
 		return NULL;
+	for (i = 0; i < num_props; i++) {
+		if (!(supported_bits & (1ULL << props[i].type)))
+			continue;
 
-	for (i = 0; i < num_values; i++) {
-		ret = drm_property_add_enum(property, i,
+		if (WARN_ON(index >= num_values)) {
+			drm_property_destroy(dev, property);
+			return NULL;
+		}
+
+		ret = drm_property_add_enum(property, index++,
 				      props[i].type,
 				      props[i].name);
 		if (ret) {
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index 3cf31ee..aff06e7 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -317,7 +317,10 @@ void omap_plane_install_properties(struct drm_plane *plane,
 					{ DRM_REFLECT_Y,  "reflect-y" },
 			};
 			prop = drm_property_create_bitmask(dev, 0, "rotation",
-					props, ARRAY_SIZE(props));
+					props, ARRAY_SIZE(props),
+					BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_90) |
+					BIT(DRM_ROTATE_180) | BIT(DRM_ROTATE_270) |
+					BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y));
 			if (prop == NULL)
 				return;
 			priv->rotation_prop = prop;
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index bfc7235..cb4850a 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1006,7 +1006,8 @@ extern struct drm_property *drm_property_create_enum(struct drm_device *dev, int
 struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 					 int flags, const char *name,
 					 const struct drm_prop_enum_list *props,
-					 int num_values);
+					 int num_props,
+					 uint64_t supported_bits);
 struct drm_property *drm_property_create_range(struct drm_device *dev, int flags,
 					 const char *name,
 					 uint64_t min, uint64_t max);
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 03/10] drm: Add drm_mode_create_rotation_property()

[sonika.jindal]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Add a function to create a standards compliant rotation property.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/drm_crtc.c |   18 ++++++++++++++++++
 include/drm/drm_crtc.h     |    2 ++
 2 files changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 2fbee61..f224d4d 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -4959,3 +4959,21 @@ void drm_mode_config_cleanup(struct drm_device *dev)
 	drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
 }
 EXPORT_SYMBOL(drm_mode_config_cleanup);
+
+struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
+						       unsigned int supported_rotations)
+{
+	static const struct drm_prop_enum_list props[] = {
+		{ DRM_ROTATE_0,   "rotate-0" },
+		{ DRM_ROTATE_90,  "rotate-90" },
+		{ DRM_ROTATE_180, "rotate-180" },
+		{ DRM_ROTATE_270, "rotate-270" },
+		{ DRM_REFLECT_X,  "reflect-x" },
+		{ DRM_REFLECT_Y,  "reflect-y" },
+	};
+
+	return drm_property_create_bitmask(dev, 0, "rotation",
+					   props, ARRAY_SIZE(props),
+					   supported_rotations);
+}
+EXPORT_SYMBOL(drm_mode_create_rotation_property);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index cb4850a..f7b383b 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1113,6 +1113,8 @@ extern int drm_format_plane_cpp(uint32_t format, int plane);
 extern int drm_format_horz_chroma_subsampling(uint32_t format);
 extern int drm_format_vert_chroma_subsampling(uint32_t format);
 extern const char *drm_get_format_name(uint32_t format);
+extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
+							      unsigned int supported_rotations);
 
 /* Helpers */
 
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 04/10] drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()

[sonika.jindal]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Use the new drm_mode_create_rotation_property() in omapdrm.

Cc: Rob Clark <robdclark at gmail.com>
Cc: Sagar Kamble <sagar.a.kamble at intel.com>
Cc: "Ville Syrjälä" <ville.syrjala at linux.intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen at ti.com>
Cc: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Rob Clark <robdclark at gmail.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
---
 drivers/gpu/drm/omapdrm/omap_plane.c |   20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index aff06e7..da9d15d 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -308,19 +308,13 @@ void omap_plane_install_properties(struct drm_plane *plane,
 	if (priv->has_dmm) {
 		prop = priv->rotation_prop;
 		if (!prop) {
-			const struct drm_prop_enum_list props[] = {
-					{ DRM_ROTATE_0,   "rotate-0" },
-					{ DRM_ROTATE_90,  "rotate-90" },
-					{ DRM_ROTATE_180, "rotate-180" },
-					{ DRM_ROTATE_270, "rotate-270" },
-					{ DRM_REFLECT_X,  "reflect-x" },
-					{ DRM_REFLECT_Y,  "reflect-y" },
-			};
-			prop = drm_property_create_bitmask(dev, 0, "rotation",
-					props, ARRAY_SIZE(props),
-					BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_90) |
-					BIT(DRM_ROTATE_180) | BIT(DRM_ROTATE_270) |
-					BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y));
+			prop = drm_mode_create_rotation_property(dev,
+								 BIT(DRM_ROTATE_0) |
+								 BIT(DRM_ROTATE_90) |
+								 BIT(DRM_ROTATE_180) |
+								 BIT(DRM_ROTATE_270) |
+								 BIT(DRM_REFLECT_X) |
+								 BIT(DRM_REFLECT_Y));
 			if (prop == NULL)
 				return;
 			priv->rotation_prop = prop;
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 05/10] drm: Add drm_rect rotation functions

[sonika.jindal]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Add some helper functions to move drm_rects between different rotated
coordinate spaces. One function does the forward transform and
another does the inverse.

Cc: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/drm_rect.c |  140 ++++++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_rect.h     |    6 ++
 2 files changed, 146 insertions(+)

diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
index 7047ca0..631f5af 100644
--- a/drivers/gpu/drm/drm_rect.c
+++ b/drivers/gpu/drm/drm_rect.c
@@ -293,3 +293,143 @@ void drm_rect_debug_print(const struct drm_rect *r, bool fixed_point)
 		DRM_DEBUG_KMS("%dx%d%+d%+d\n", w, h, r->x1, r->y1);
 }
 EXPORT_SYMBOL(drm_rect_debug_print);
+
+/**
+ * drm_rect_rotate - Rotate the rectangle
+ * @r: rectangle to be rotated
+ * @width: Width of the coordinate space
+ * @height: Height of the coordinate space
+ * @rotation: Transformation to be applied
+ *
+ * Apply @rotation to the coordinates of rectangle @r.
+ *
+ * @width and @height combined with @rotation define
+ * the location of the new origin.
+ *
+ * @width correcsponds to the horizontal and @height
+ * to the vertical axis of the untransformed coordinate
+ * space.
+ */
+void drm_rect_rotate(struct drm_rect *r,
+		     int width, int height,
+		     unsigned int rotation)
+{
+	struct drm_rect tmp;
+
+	if (rotation & (BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y))) {
+		tmp = *r;
+
+		if (rotation & BIT(DRM_REFLECT_X)) {
+			r->x1 = width - tmp.x2;
+			r->x2 = width - tmp.x1;
+		}
+
+		if (rotation & BIT(DRM_REFLECT_Y)) {
+			r->y1 = height - tmp.y2;
+			r->y2 = height - tmp.y1;
+		}
+	}
+
+	switch (rotation & 0xf) {
+	case BIT(DRM_ROTATE_0):
+		break;
+	case BIT(DRM_ROTATE_90):
+		tmp = *r;
+		r->x1 = tmp.y1;
+		r->x2 = tmp.y2;
+		r->y1 = width - tmp.x2;
+		r->y2 = width - tmp.x1;
+		break;
+	case BIT(DRM_ROTATE_180):
+		tmp = *r;
+		r->x1 = width - tmp.x2;
+		r->x2 = width - tmp.x1;
+		r->y1 = height - tmp.y2;
+		r->y2 = height - tmp.y1;
+		break;
+	case BIT(DRM_ROTATE_270):
+		tmp = *r;
+		r->x1 = height - tmp.y2;
+		r->x2 = height - tmp.y1;
+		r->y1 = tmp.x1;
+		r->y2 = tmp.x2;
+		break;
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL(drm_rect_rotate);
+
+/**
+ * drm_rect_rotate_inv - Inverse rotate the rectangle
+ * @r: rectangle to be rotated
+ * @width: Width of the coordinate space
+ * @height: Height of the coordinate space
+ * @rotation: Transformation whose inverse is to be applied
+ *
+ * Apply the inverse of @rotation to the coordinates
+ * of rectangle @r.
+ *
+ * @width and @height combined with @rotation define
+ * the location of the new origin.
+ *
+ * @width correcsponds to the horizontal and @height
+ * to the vertical axis of the original untransformed
+ * coordinate space, so that you never have to flip
+ * them when doing a rotatation and its inverse.
+ * That is, if you do:
+ *
+ * drm_rotate(&r, width, height, rotation);
+ * drm_rotate_inv(&r, width, height, rotation);
+ *
+ * you will always get back the original rectangle.
+ */
+void drm_rect_rotate_inv(struct drm_rect *r,
+			 int width, int height,
+			 unsigned int rotation)
+{
+	struct drm_rect tmp;
+
+	switch (rotation & 0xf) {
+	case BIT(DRM_ROTATE_0):
+		break;
+	case BIT(DRM_ROTATE_90):
+		tmp = *r;
+		r->x1 = width - tmp.y2;
+		r->x2 = width - tmp.y1;
+		r->y1 = tmp.x1;
+		r->y2 = tmp.x2;
+		break;
+	case BIT(DRM_ROTATE_180):
+		tmp = *r;
+		r->x1 = width - tmp.x2;
+		r->x2 = width - tmp.x1;
+		r->y1 = height - tmp.y2;
+		r->y2 = height - tmp.y1;
+		break;
+	case BIT(DRM_ROTATE_270):
+		tmp = *r;
+		r->x1 = tmp.y1;
+		r->x2 = tmp.y2;
+		r->y1 = height - tmp.x2;
+		r->y2 = height - tmp.x1;
+		break;
+	default:
+		break;
+	}
+
+	if (rotation & (BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y))) {
+		tmp = *r;
+
+		if (rotation & BIT(DRM_REFLECT_X)) {
+			r->x1 = width - tmp.x2;
+			r->x2 = width - tmp.x1;
+		}
+
+		if (rotation & BIT(DRM_REFLECT_Y)) {
+			r->y1 = height - tmp.y2;
+			r->y2 = height - tmp.y1;
+		}
+	}
+}
+EXPORT_SYMBOL(drm_rect_rotate_inv);
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index d128629..26bb55e 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -163,5 +163,11 @@ int drm_rect_calc_vscale_relaxed(struct drm_rect *src,
 				 struct drm_rect *dst,
 				 int min_vscale, int max_vscale);
 void drm_rect_debug_print(const struct drm_rect *r, bool fixed_point);
+void drm_rect_rotate(struct drm_rect *r,
+		     int width, int height,
+		     unsigned int rotation);
+void drm_rect_rotate_inv(struct drm_rect *r,
+			 int width, int height,
+			 unsigned int rotation);
 
 #endif
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 06/10] drm: Add drm_rotation_simplify()

[sonika.jindal]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

drm_rotation_simplify() can be used to eliminate unsupported rotation
flags. It will check if any unsupported flags are present, and if so
it will modify the rotation to an alternate form by adding 180 degrees
to rotation angle, and flipping the reflect x and y bits. The hope is
that this identity transform will eliminate the unsupported flags.

Of course that might not result in any more supported rotation, so
the caller is still responsible for checking the result afterwards.

Cc: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/drm_crtc.c |   30 ++++++++++++++++++++++++++++++
 include/drm/drm_crtc.h     |    2 ++
 2 files changed, 32 insertions(+)

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index f224d4d..89bab66 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -4842,6 +4842,36 @@ int drm_format_vert_chroma_subsampling(uint32_t format)
 EXPORT_SYMBOL(drm_format_vert_chroma_subsampling);
 
 /**
+ * drm_rotation_simplify() - Try to simplify the rotation
+ * @rotation: Rotation to be simplified
+ * @supported_rotations: Supported rotations
+ *
+ * Attempt to simplify the rotation to a form that is supported.
+ * Eg. if the hardware supports everything except DRM_REFLECT_X
+ * one could call this function like this:
+ *
+ * drm_rotation_simplify(rotation, BIT(DRM_ROTATE_0) |
+ *                       BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_180) |
+ *                       BIT(DRM_ROTATE_270) | BIT(DRM_REFLECT_Y));
+ *
+ * to eliminate the DRM_ROTATE_X flag. Depending on what kind of
+ * transforms the hardware supports, this function may not
+ * be able to produce a supported transform, so the caller should
+ * check the result afterwards.
+ */
+unsigned int drm_rotation_simplify(unsigned int rotation,
+				   unsigned int supported_rotations)
+{
+	if (rotation & ~supported_rotations) {
+		rotation ^= BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y);
+		rotation = (rotation & ~0xf) | BIT((ffs(rotation & 0xf) + 1) % 4);
+	}
+
+	return rotation;
+}
+EXPORT_SYMBOL(drm_rotation_simplify);
+
+/**
  * drm_mode_config_init - initialize DRM mode_configuration structure
  * @dev: DRM device
  *
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index f7b383b..08ed55e 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1115,6 +1115,8 @@ extern int drm_format_vert_chroma_subsampling(uint32_t format);
 extern const char *drm_get_format_name(uint32_t format);
 extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
 							      unsigned int supported_rotations);
+extern unsigned int drm_rotation_simplify(unsigned int rotation,
+					  unsigned int supported_rotations);
 
 /* Helpers */
 
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 07/10] drm/i915: Add 180 degree sprite rotation support

[sonika.jindal]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

The sprite planes (in fact all display planes starting from gen4)
support 180 degree rotation. Add the relevant low level bits to the
sprite code to make use of that feature.

The upper layers are not yet plugged in.

v2: HSW handles the rotated buffer offset automagically

v3: BDW also handles the rotated buffer offset automagically

Testcase: igt/kms_rotation_crc

Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble at intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h     |    3 +++
 drivers/gpu/drm/i915/intel_drv.h    |    1 +
 drivers/gpu/drm/i915/intel_sprite.c |   37 +++++++++++++++++++++++++++++++++++
 3 files changed, 41 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3488567..c70c804 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4171,6 +4171,7 @@ enum punit_power_well {
 #define   DVS_YUV_ORDER_UYVY	(1<<16)
 #define   DVS_YUV_ORDER_YVYU	(2<<16)
 #define   DVS_YUV_ORDER_VYUY	(3<<16)
+#define   DVS_ROTATE_180	(1<<15)
 #define   DVS_DEST_KEY		(1<<2)
 #define   DVS_TRICKLE_FEED_DISABLE (1<<14)
 #define   DVS_TILED		(1<<10)
@@ -4241,6 +4242,7 @@ enum punit_power_well {
 #define   SPRITE_YUV_ORDER_UYVY		(1<<16)
 #define   SPRITE_YUV_ORDER_YVYU		(2<<16)
 #define   SPRITE_YUV_ORDER_VYUY		(3<<16)
+#define   SPRITE_ROTATE_180		(1<<15)
 #define   SPRITE_TRICKLE_FEED_DISABLE	(1<<14)
 #define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
 #define   SPRITE_TILED			(1<<10)
@@ -4314,6 +4316,7 @@ enum punit_power_well {
 #define   SP_YUV_ORDER_UYVY		(1<<16)
 #define   SP_YUV_ORDER_YVYU		(2<<16)
 #define   SP_YUV_ORDER_VYUY		(3<<16)
+#define   SP_ROTATE_180			(1<<15)
 #define   SP_TILED			(1<<10)
 #define _SPALINOFF		(VLV_DISPLAY_BASE + 0x72184)
 #define _SPASTRIDE		(VLV_DISPLAY_BASE + 0x72188)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ab5962b..67b1c59 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -437,6 +437,7 @@ struct intel_plane {
 	unsigned int crtc_w, crtc_h;
 	uint32_t src_x, src_y;
 	uint32_t src_w, src_h;
+	unsigned int rotation;
 
 	/* Since we need to change the watermarks before/after
 	 * enabling/disabling the planes, we need to store the parameters here
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 404335d..54d4224 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -163,6 +163,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 	sprctl &= ~SP_PIXFORMAT_MASK;
 	sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SP_TILED;
+	sprctl &= ~SP_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_YUYV:
@@ -234,6 +235,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 							fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SP_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -363,6 +372,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	sprctl &= ~SPRITE_RGB_ORDER_RGBX;
 	sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SPRITE_TILED;
+	sprctl &= ~SPRITE_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -424,6 +434,17 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SPRITE_ROTATE_180;
+
+		/* HSW and BDW does this automagically in hardware */
+		if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+			x += src_w;
+			y += src_h;
+			linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+		}
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -569,6 +590,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	dvscntr &= ~DVS_RGB_ORDER_XBGR;
 	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
 	dvscntr &= ~DVS_TILED;
+	dvscntr &= ~DVS_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -625,6 +647,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= dvssurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		dvscntr |= DVS_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -883,6 +913,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
+	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+			intel_plane->rotation);
+
 	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
 	BUG_ON(hscale < 0);
 
@@ -921,6 +954,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
 				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
 
+		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+				    intel_plane->rotation);
+
 		/* sanity check to make sure the src viewport wasn't enlarged */
 		WARN_ON(src.x1 < (int) src_x ||
 			src.y1 < (int) src_y ||
@@ -1296,6 +1332,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 
 	intel_plane->pipe = pipe;
 	intel_plane->plane = plane;
+	intel_plane->rotation = BIT(DRM_ROTATE_0);
 	possible_crtcs = (1 << pipe);
 	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
 			     &intel_plane_funcs,
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 08/10] drm/i915: Make intel_plane_restore() return an error

[sonika.jindal]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Propagate the error from intel_update_plane() up through
intel_plane_restore() to the caller. This will be used for
rollback purposes when setting properties fails.

Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h    |    2 +-
 drivers/gpu/drm/i915/intel_sprite.c |   14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 67b1c59..da5a3ca 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -993,7 +993,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);
 int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
 			       enum plane plane);
-void intel_plane_restore(struct drm_plane *plane);
+int intel_plane_restore(struct drm_plane *plane);
 void intel_plane_disable(struct drm_plane *plane);
 int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
 			      struct drm_file *file_priv);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 54d4224..cbad738 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1202,18 +1202,18 @@ out_unlock:
 	return ret;
 }
 
-void intel_plane_restore(struct drm_plane *plane)
+int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 
 	if (!plane->crtc || !plane->fb)
-		return;
+		return 0;
 
-	intel_update_plane(plane, plane->crtc, plane->fb,
-			   intel_plane->crtc_x, intel_plane->crtc_y,
-			   intel_plane->crtc_w, intel_plane->crtc_h,
-			   intel_plane->src_x, intel_plane->src_y,
-			   intel_plane->src_w, intel_plane->src_h);
+	return intel_update_plane(plane, plane->crtc, plane->fb,
+				  intel_plane->crtc_x, intel_plane->crtc_y,
+				  intel_plane->crtc_w, intel_plane->crtc_h,
+				  intel_plane->src_x, intel_plane->src_y,
+				  intel_plane->src_w, intel_plane->src_h);
 }
 
 void intel_plane_disable(struct drm_plane *plane)
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 09/10] drm/i915: Add rotation property for sprites

[sonika.jindal]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Sprite planes support 180 degree rotation. The lower layers are now in
place, so hook in the standard rotation property to expose the feature
to the users.

Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h     |    1 +
 drivers/gpu/drm/i915/intel_sprite.c |   42 ++++++++++++++++++++++++++++++++++-
 2 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0640071..b56a1a5 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1514,6 +1514,7 @@ struct drm_i915_private {
 
 	struct drm_property *broadcast_rgb_property;
 	struct drm_property *force_audio_property;
+	struct drm_property *rotation_property;
 
 	uint32_t hw_context_size;
 	struct list_head context_list;
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index cbad738..b9af256 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1202,6 +1202,30 @@ out_unlock:
 	return ret;
 }
 
+static int intel_plane_set_property(struct drm_plane *plane,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct drm_i915_private *dev_priv = plane->dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if (prop == dev_priv->rotation_property) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_plane->rotation;
+		intel_plane->rotation = val;
+		ret = intel_plane_restore(plane);
+		if (ret)
+			intel_plane->rotation = old_val;
+	}
+
+	return ret;
+}
+
 int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -1228,6 +1252,7 @@ static const struct drm_plane_funcs intel_plane_funcs = {
 	.update_plane = intel_update_plane,
 	.disable_plane = intel_disable_plane,
 	.destroy = intel_destroy_plane,
+	.set_property = intel_plane_set_property,
 };
 
 static uint32_t ilk_plane_formats[] = {
@@ -1264,6 +1289,7 @@ static uint32_t vlv_plane_formats[] = {
 int
 intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_plane *intel_plane;
 	unsigned long possible_crtcs;
 	const uint32_t *plane_formats;
@@ -1338,8 +1364,22 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 			     &intel_plane_funcs,
 			     plane_formats, num_plane_formats,
 			     false);
-	if (ret)
+	if (ret) {
 		kfree(intel_plane);
+		goto out;
+	}
+
+	if (!dev_priv->rotation_property)
+		dev_priv->rotation_property =
+			drm_mode_create_rotation_property(dev,
+							  BIT(DRM_ROTATE_0) |
+							  BIT(DRM_ROTATE_180));
+
+	if (dev_priv->rotation_property)
+		drm_object_attach_property(&intel_plane->base.base,
+					   dev_priv->rotation_property,
+					   intel_plane->rotation);
 
+ out:
 	return ret;
 }
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 10/10] drm/i915: Add 180 degree primary plane rotation support

[sonika.jindal]

From: Sonika Jindal <sonika.jindal@intel.com>

Primary planes support 180 degree rotation. Expose the feature
through rotation drm property.

v2: Calculating linear/tiled offsets based on pipe source width and
height. Added 180 degree rotation support in ironlake_update_plane.

v3: Checking if CRTC is active before issueing update_plane. Added
wait for vblank to make sure we dont overtake page flips. Disabling
FBC since it does not work with rotated planes.

v4: Updated rotation checks for pending flips, fbc disable. Creating
rotation property only for Gen4 onwards. Property resetting as part
of lastclose.

v5: Resetting property in i915_driver_lastclose properly for planes
and crtcs. Fixed linear offset calculation that was off by 1 w.r.t
width in i9xx_update_plane and ironlake_update_plane. Removed tab
based indentation and unnecessary braces in intel_crtc_set_property
and intel_update_fbc. FBC and flip related checks should be done only
for valid crtcs.

v6: Minor nits in FBC disable checks for comments in intel_crtc_set_property
and positioning the disable code in intel_update_fbc.

v7: In case rotation property on inactive crtc is updated, we return
successfully printing debug log as crtc is inactive and only property change
is preserved.

v8: update_plane is changed to update_primary_plane, crtc->fb is changed to
crtc->primary->fb  and return value of update_primary_plane is ignored.

v9: added rotation property to primary plane instead of crtc.

Testcase: igt/kms_rotation_crc

Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Cc: vijay.a.purushothaman at intel.com
Signed-off-by: Uma Shankar <uma.shankar at intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble at intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_dma.c      |   17 +++++++
 drivers/gpu/drm/i915/i915_reg.h      |    1 +
 drivers/gpu/drm/i915/intel_display.c |   91 ++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_pm.c      |    8 +++
 4 files changed, 113 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5e583a1..4c91fbc 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1939,6 +1939,8 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file)
 void i915_driver_lastclose(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *crtc;
+	struct intel_plane *plane;
 
 	/* On gen6+ we refuse to init without kms enabled, but then the drm core
 	 * goes right around and calls lastclose. Check for this and don't clean
@@ -1946,6 +1948,21 @@ void i915_driver_lastclose(struct drm_device *dev)
 	if (!dev_priv)
 		return;
 
+	if (dev_priv->rotation_property) {
+		list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+			to_intel_plane(crtc->base.primary)->rotation = BIT(DRM_ROTATE_0);
+			drm_object_property_set_value(&crtc->base.base,
+						dev_priv->rotation_property,
+						to_intel_plane(crtc->base.primary)->rotation);
+		}
+		list_for_each_entry(plane, &dev->mode_config.plane_list, base.head) {
+			plane->rotation = BIT(DRM_ROTATE_0);
+			drm_object_property_set_value(&plane->base.base,
+						dev_priv->rotation_property,
+						plane->rotation);
+		}
+	}
+
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		intel_fbdev_restore_mode(dev);
 		vga_switcheroo_process_delayed_switch();
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c70c804..c600d3b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4087,6 +4087,7 @@ enum punit_power_well {
 #define   DISPPLANE_NO_LINE_DOUBLE		0
 #define   DISPPLANE_STEREO_POLARITY_FIRST	0
 #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define   DISPPLANE_ROTATE_180         (1<<15)
 #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
 #define   DISPPLANE_TILED			(1<<10)
 #define _DSPAADDR				0x70184
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5e8e711..1dc8b68 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2414,7 +2414,9 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
 	unsigned long linear_offset;
 	u32 dspcntr;
 	u32 reg;
+	int pixel_size;
 
+	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
 	intel_fb = to_intel_framebuffer(fb);
 	obj = intel_fb->obj;
 
@@ -2422,6 +2424,8 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
 	dspcntr = I915_READ(reg);
 	/* Mask out pixel format bits in case we change it */
 	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	dspcntr &= ~DISPPLANE_ROTATE_180;
+
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_C8:
 		dspcntr |= DISPPLANE_8BPP;
@@ -2463,8 +2467,6 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
 	if (IS_G4X(dev))
 		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
 
-	I915_WRITE(reg, dspcntr);
-
 	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
 
 	if (INTEL_INFO(dev)->gen >= 4) {
@@ -2477,6 +2479,17 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc,
 		intel_crtc->dspaddr_offset = linear_offset;
 	}
 
+	if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
+		dspcntr |= DISPPLANE_ROTATE_180;
+
+		x += (intel_crtc->config.pipe_src_w - 1);
+		y += (intel_crtc->config.pipe_src_h - 1);
+		linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
+                                   (intel_crtc->config.pipe_src_w - 1) * pixel_size;
+	}
+
+	I915_WRITE(reg, dspcntr);
+
 	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
 		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
 		      fb->pitches[0]);
@@ -2504,7 +2517,9 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
 	unsigned long linear_offset;
 	u32 dspcntr;
 	u32 reg;
+	int pixel_size;
 
+	pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
 	intel_fb = to_intel_framebuffer(fb);
 	obj = intel_fb->obj;
 
@@ -2512,6 +2527,8 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
 	dspcntr = I915_READ(reg);
 	/* Mask out pixel format bits in case we change it */
 	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	dspcntr &= ~DISPPLANE_ROTATE_180;
+
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_C8:
 		dspcntr |= DISPPLANE_8BPP;
@@ -2549,8 +2566,6 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
 	else
 		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
 
-	I915_WRITE(reg, dspcntr);
-
 	linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
 	intel_crtc->dspaddr_offset =
 		intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
@@ -2558,6 +2573,19 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
 					       fb->pitches[0]);
 	linear_offset -= intel_crtc->dspaddr_offset;
 
+	if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) {
+		dspcntr |= DISPPLANE_ROTATE_180;
+
+		if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+			x += (intel_crtc->config.pipe_src_w - 1);
+			y += (intel_crtc->config.pipe_src_h - 1);
+			linear_offset += (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] +
+					(intel_crtc->config.pipe_src_w - 1) * pixel_size;
+		}
+	}
+
+	I915_WRITE(reg, dspcntr);
+
 	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
 		      i915_gem_obj_ggtt_offset(obj), linear_offset, x, y,
 		      fb->pitches[0]);
@@ -11324,10 +11352,51 @@ static void intel_plane_destroy(struct drm_plane *plane)
 	kfree(intel_plane);
 }
 
+static int intel_primary_plane_set_property(struct drm_plane *plane,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	struct intel_crtc *intel_crtc = to_intel_crtc(plane->crtc);
+	struct drm_crtc *crtc = &intel_crtc->base;
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if (prop == dev_priv->rotation_property) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_plane->rotation;
+		intel_plane->rotation = val;
+
+		if (intel_crtc->active && intel_crtc->primary_enabled) {
+			intel_crtc_wait_for_pending_flips(crtc);
+
+			/* FBC does not work on some platforms for rotated planes */
+			if (dev_priv->fbc.plane == intel_crtc->plane &&
+			    INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+			    intel_plane->rotation != BIT(DRM_ROTATE_0))
+				intel_disable_fbc(dev);
+
+			dev_priv->display.update_primary_plane(crtc, crtc->primary->fb, 0, 0);
+		} else {
+			DRM_DEBUG_KMS("[CRTC:%d] is not active. Only rotation property is updated\n",
+					crtc->base.id);
+			ret = 0;
+		}
+	}
+
+	return ret;
+}
+
 static const struct drm_plane_funcs intel_primary_plane_funcs = {
 	.update_plane = intel_primary_plane_setplane,
 	.disable_plane = intel_primary_plane_disable,
 	.destroy = intel_plane_destroy,
+	.set_property = intel_primary_plane_set_property
 };
 
 static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
@@ -11335,6 +11404,7 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
 {
 	struct intel_plane *primary;
 	const uint32_t *intel_primary_formats;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	int num_formats;
 
 	primary = kzalloc(sizeof(*primary), GFP_KERNEL);
@@ -11345,6 +11415,7 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
 	primary->max_downscale = 1;
 	primary->pipe = pipe;
 	primary->plane = pipe;
+	primary->rotation = BIT(DRM_ROTATE_0);
 	if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4)
 		primary->plane = !pipe;
 
@@ -11360,6 +11431,18 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
 				 &intel_primary_plane_funcs,
 				 intel_primary_formats, num_formats,
 				 DRM_PLANE_TYPE_PRIMARY);
+	if (INTEL_INFO(dev)->gen >= 4) {
+		if (!dev_priv->rotation_property)
+			dev_priv->rotation_property =
+				drm_mode_create_rotation_property(dev,
+								BIT(DRM_ROTATE_0) |
+								BIT(DRM_ROTATE_180));
+		if (dev_priv->rotation_property)
+			drm_object_attach_property(&primary->base.base,
+						dev_priv->rotation_property,
+						primary->rotation);
+	}
+
 	return &primary->base;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 2043c4b..cabccfb 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -562,6 +562,14 @@ void intel_update_fbc(struct drm_device *dev)
 		goto out_disable;
 	}
 
+	if (INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+	    to_intel_plane(crtc->primary)->rotation != BIT(DRM_ROTATE_0)) {
+		if (set_no_fbc_reason(dev_priv, FBC_UNSUPPORTED_MODE))
+			DRM_DEBUG_KMS("mode incompatible with compression, "
+				      "disabling\n");
+		goto out_disable;
+	}
+
 	/* If the kernel debugger is active, always disable compression */
 	if (in_dbg_master())
 		goto out_disable;
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/10] Support for 180 degree HW rotation

[Daniel Vetter]

On Wed, Jun 18, 2014 at 05:14:49PM +0530, sonika.jindal@intel.com wrote:
> From: Sonika Jindal <sonika.jindal@intel.com>
> 
> Enables 180 degree rotation for sprite and primary planes.
> Updated the primary plane rotation support as per the new universal plane
> design.
> 
> Most of these patches were already reviewed in intel-gfx in February 2014 thats
> why there is version history in few of them.
> 
> Testcase: kms_rotation_crc
> This igt can be extended for clipped rotation cases. Right it only tests 180
> degree rotation for sprite and primary plane with crc check.
> 
> Sonika Jindal (1):
>   drm/i915: Add 180 degree primary plane rotation support
> 
> Ville Syrjälä (9):
>   drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
>   drm: Add support_bits parameter to drm_property_create_bitmask()
>   drm: Add drm_mode_create_rotation_property()
>   drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
>   drm: Add drm_rect rotation functions
>   drm: Add drm_rotation_simplify()
>   drm/i915: Add 180 degree sprite rotation support
>   drm/i915: Make intel_plane_restore() return an error
>   drm/i915: Add rotation property for sprites

Pleas don't repost entire patch series on the same day without a changelog
in the cover letter explaining what's going on and what changed.

If you just need to repost a few patches that changed due to review,
please do that with an in-reply-to directly to the relevant discussion.

If everyone reposts their big patch series a few times a day we'll have
utter chaos.
-Daniel

> 
>  drivers/gpu/drm/drm_crtc.c           |   66 +++++++++++++++-
>  drivers/gpu/drm/drm_rect.c           |  140 ++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/i915_dma.c      |   17 +++++
>  drivers/gpu/drm/i915/i915_drv.h      |    1 +
>  drivers/gpu/drm/i915/i915_reg.h      |    4 +
>  drivers/gpu/drm/i915/intel_display.c |   91 +++++++++++++++++++++-
>  drivers/gpu/drm/i915/intel_drv.h     |    3 +-
>  drivers/gpu/drm/i915/intel_pm.c      |    8 ++
>  drivers/gpu/drm/i915/intel_sprite.c  |   93 ++++++++++++++++++++--
>  drivers/gpu/drm/omapdrm/omap_drv.h   |    7 --
>  drivers/gpu/drm/omapdrm/omap_plane.c |   17 ++---
>  include/drm/drm_crtc.h               |   15 +++-
>  include/drm/drm_rect.h               |    6 ++
>  13 files changed, 433 insertions(+), 35 deletions(-)
> 
> -- 
> 1.7.10.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

Re: [PATCH 00/10] Support for 180 degree HW rotation

[Jindal, Sonika]

On 6/18/2014 5:22 PM, Daniel Vetter wrote:
> On Wed, Jun 18, 2014 at 05:14:49PM +0530, sonika.jindal@intel.com wrote:
>> From: Sonika Jindal <sonika.jindal@intel.com>
>>
>> Enables 180 degree rotation for sprite and primary planes.
>> Updated the primary plane rotation support as per the new universal plane
>> design.
>>
>> Most of these patches were already reviewed in intel-gfx in February 2014 thats
>> why there is version history in few of them.
>>
>> Testcase: kms_rotation_crc
>> This igt can be extended for clipped rotation cases. Right it only tests 180
>> degree rotation for sprite and primary plane with crc check.
>>
>> Sonika Jindal (1):
>>    drm/i915: Add 180 degree primary plane rotation support
>>
>> Ville Syrjälä (9):
>>    drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
>>    drm: Add support_bits parameter to drm_property_create_bitmask()
>>    drm: Add drm_mode_create_rotation_property()
>>    drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
>>    drm: Add drm_rect rotation functions
>>    drm: Add drm_rotation_simplify()
>>    drm/i915: Add 180 degree sprite rotation support
>>    drm/i915: Make intel_plane_restore() return an error
>>    drm/i915: Add rotation property for sprites
>
> Pleas don't repost entire patch series on the same day without a changelog
> in the cover letter explaining what's going on and what changed.
>
> If you just need to repost a few patches that changed due to review,
> please do that with an in-reply-to directly to the relevant discussion.
>
> If everyone reposts their big patch series a few times a day we'll have
> utter chaos.
> -Daniel

I am sorry for this. I thought creating a new patchset should be good, 
missed updating it in cover letter.
I will keep this in mind.


>
>>
>>   drivers/gpu/drm/drm_crtc.c           |   66 +++++++++++++++-
>>   drivers/gpu/drm/drm_rect.c           |  140 ++++++++++++++++++++++++++++++++++
>>   drivers/gpu/drm/i915/i915_dma.c      |   17 +++++
>>   drivers/gpu/drm/i915/i915_drv.h      |    1 +
>>   drivers/gpu/drm/i915/i915_reg.h      |    4 +
>>   drivers/gpu/drm/i915/intel_display.c |   91 +++++++++++++++++++++-
>>   drivers/gpu/drm/i915/intel_drv.h     |    3 +-
>>   drivers/gpu/drm/i915/intel_pm.c      |    8 ++
>>   drivers/gpu/drm/i915/intel_sprite.c  |   93 ++++++++++++++++++++--
>>   drivers/gpu/drm/omapdrm/omap_drv.h   |    7 --
>>   drivers/gpu/drm/omapdrm/omap_plane.c |   17 ++---
>>   include/drm/drm_crtc.h               |   15 +++-
>>   include/drm/drm_rect.h               |    6 ++
>>   13 files changed, 433 insertions(+), 35 deletions(-)
>>
>> --
>> 1.7.10.4
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>

Re: [PATCH 00/10] Support for 180 degree HW rotation

[Daniel Vetter]

On Wed, Jun 18, 2014 at 05:27:41PM +0530, Jindal, Sonika wrote:
> 
> 
> On 6/18/2014 5:22 PM, Daniel Vetter wrote:
> >On Wed, Jun 18, 2014 at 05:14:49PM +0530, sonika.jindal@intel.com wrote:
> >>From: Sonika Jindal <sonika.jindal@intel.com>
> >>
> >>Enables 180 degree rotation for sprite and primary planes.
> >>Updated the primary plane rotation support as per the new universal plane
> >>design.
> >>
> >>Most of these patches were already reviewed in intel-gfx in February 2014 thats
> >>why there is version history in few of them.
> >>
> >>Testcase: kms_rotation_crc
> >>This igt can be extended for clipped rotation cases. Right it only tests 180
> >>degree rotation for sprite and primary plane with crc check.
> >>
> >>Sonika Jindal (1):
> >>   drm/i915: Add 180 degree primary plane rotation support
> >>
> >>Ville Syrjälä (9):
> >>   drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
> >>   drm: Add support_bits parameter to drm_property_create_bitmask()
> >>   drm: Add drm_mode_create_rotation_property()
> >>   drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
> >>   drm: Add drm_rect rotation functions
> >>   drm: Add drm_rotation_simplify()
> >>   drm/i915: Add 180 degree sprite rotation support
> >>   drm/i915: Make intel_plane_restore() return an error
> >>   drm/i915: Add rotation property for sprites
> >
> >Pleas don't repost entire patch series on the same day without a changelog
> >in the cover letter explaining what's going on and what changed.
> >
> >If you just need to repost a few patches that changed due to review,
> >please do that with an in-reply-to directly to the relevant discussion.
> >
> >If everyone reposts their big patch series a few times a day we'll have
> >utter chaos.
> >-Daniel
> 
> I am sorry for this. I thought creating a new patchset should be good,
> missed updating it in cover letter.
> I will keep this in mind.

It's always a balancing act - if the threads nest too deeply eventually
in-reply-to becomes a mess, too. But a rule of thumb is that you should
only resend when the patch series changed completely or once review has
settled down (so only after a few days) and the review thread has become
too deeply nested.

But resending the entire series on the same day before review has
concluded is definitely too early. Our team is global so without a full
day not everyone even had a chance to look at it - us west coast is still
fast asleep ;-)
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

Re: [PATCH 00/10] Support for 180 degree HW rotation

[Damien Lespiau]

On Wed, Jun 18, 2014 at 05:14:49PM +0530, sonika.jindal@intel.com wrote:
> From: Sonika Jindal <sonika.jindal@intel.com>
> 
> Enables 180 degree rotation for sprite and primary planes.
> Updated the primary plane rotation support as per the new universal plane
> design.
> 
> Most of these patches were already reviewed in intel-gfx in February 2014 thats
> why there is version history in few of them.
> 
> Testcase: kms_rotation_crc
> This igt can be extended for clipped rotation cases. Right it only tests 180
> degree rotation for sprite and primary plane with crc check.

* All the Signed-off-by/Cc tags have mangled e-mail addresses, (blah at foo) so:
  - The Cc: fields of your emails are empty.
  - checkpatch.pl complains about invalid s-o-b tags.

* Please remove the Cc: to the LKML, no need to add more chaos there.

-- 
Damien