Re: [PATCH v2 1/2] arm: dts: am4372: let boards enable RTC and Watchdog

[Nishanth Menon <nm@ti.com>]

On 06/18/2014 04:51 PM, Felipe Balbi wrote:
> Hi,
>
> On Wed, Jun 18, 2014 at 04:43:28PM -0500, Nishanth Menon wrote:
>> On 06/18/2014 02:25 PM, Felipe Balbi wrote:
>>> Hi,
>>>
>>> On Wed, Jun 18, 2014 at 10:55:35AM -0500, Nishanth Menon wrote:
>>>> $subject - ARM: dts:
>>>>
>>>> On 06/18/2014 10:43 AM, Felipe Balbi wrote:
>>>>> by providing phandles to rtc and wdt nodes, we can
>>>>> let boards enable rtc and wdt as necessary.
>>>>>
>>>>> Signed-off-by: Felipe Balbi <balbi@ti.com>
>>>>> ---
>>>>>   arch/arm/boot/dts/am4372.dtsi | 4 ++--
>>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
>>>>> index 49fa596..e3830d4 100644
>>>>> --- a/arch/arm/boot/dts/am4372.dtsi
>>>>> +++ b/arch/arm/boot/dts/am4372.dtsi
>>>>> @@ -270,7 +270,7 @@
>>>>>   			ti,hwmods = "counter_32k";
>>>>>   		};
>>>>>
>>>>> -		rtc@44e3e000 {
>>>>> +		rtc: rtc@44e3e000 {
>>>>>   			compatible = "ti,am4372-rtc","ti,da830-rtc";
>>>>>   			reg = <0x44e3e000 0x1000>;
>>>>>   			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
>>>>> @@ -279,7 +279,7 @@
>>>>>   			status = "disabled";
>>>>>   		};
>>>>>
>>>>> -		wdt@44e35000 {
>>>>> +		wdt: wdt@44e35000 {
>>>>>   			compatible = "ti,am4372-wdt","ti,omap3-wdt";
>>>>>   			reg = <0x44e35000 0x1000>;
>>>>>   			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
>>>>>
>>>> we might want to fix up any other similar nodes in dtsi as well, no?
>>>>
>>>> examples:
>>>> cpu@0
>>>
>>> and why would you want boards to mess with the cpu node ?
>>>
>> cpu-supply = <&regulator>;
>>
>> for cpufreq.
>
> good point, but does thqt even work with AM437x devices in mainline?

it will once we are done adding a node. context here being - if you are 
fixing phandles, please fix them all up.. that is a little nice to do.

I wont argue more on this. I will leave it to maintainers.

--
Regards,
Nishanth Menon