* Re: 3.16-rc2 WARNING: CPU: 0 PID: 0 at arch/x86/xen/multicalls.c:129 xen_mc_flush+0x1ab/0x1c0()
2014-06-27 14:15 ` Konrad Rzeszutek Wilk
@ 2014-06-27 14:44 ` Sander Eikelenboom
2014-06-29 9:53 ` Sander Eikelenboom
1 sibling, 0 replies; 8+ messages in thread
From: Sander Eikelenboom @ 2014-06-27 14:44 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: xen-devel, Boris Ostrovsky, David Vrabel
[-- Attachment #1: Type: text/plain, Size: 3338 bytes --]
Friday, June 27, 2014, 4:15:30 PM, you wrote:
> On Thu, Jun 26, 2014 at 12:16:43PM -0400, Boris Ostrovsky wrote:
>> On 06/26/2014 07:57 AM, Sander Eikelenboom wrote:
>> >Hi,
>> >
>> >Got the warning below on dom0 boot with a 3.16-rc2 kernel, doesn't seem to do
>> >much immediate harm:
>> >
>> >[ 12.723393] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.05 BogoMIPS (lpj=10667280)
>> >[ 12.723414] pid_max: default: 32768 minimum: 301
>> >[ 12.723433] ACPI: Core revision 20140424
>> >[ 12.740681] ACPI: All ACPI Tables successfully acquired
>> >[ 12.743145] ------------[ cut here ]------------
>> >[ 12.743170] WARNING: CPU: 0 PID: 0 at arch/x86/xen/multicalls.c:129 xen_mc_flush+0x1ab/0x1c0()
>> >[ 12.743186] Modules linked in:
>> >[ 12.743196] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc2-20140626+ #1
>> >[ 12.743209] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
>> >[ 12.743223] 0000000000000009 ffffffff82203d88 ffffffff81afdba7 ffffffff822184e0
>> >[ 12.743242] 0000000000000000 ffffffff82203dc8 ffffffff810bfdb2 ffffffff81007858
>> >[ 12.743261] 0000000000000000 0000000000000001 0000000000000000 ffff88005f60b120
>> >[ 12.743280] Call Trace:
>> >[ 12.743290] [<ffffffff81afdba7>] dump_stack+0x46/0x58
>> >[ 12.743302] [<ffffffff810bfdb2>] warn_slowpath_common+0x82/0xb0
>> >[ 12.743316] [<ffffffff81007858>] ? pte_pfn_to_mfn+0x88/0xa0
>> >[ 12.743328] [<ffffffff810bfdf5>] warn_slowpath_null+0x15/0x20
>> >[ 12.743341] [<ffffffff81004b6b>] xen_mc_flush+0x1ab/0x1c0
>> >[ 12.743353] [<ffffffff810072fd>] xen_alloc_pte+0x1ad/0x220
>> >[ 12.743364] [<ffffffff8100886b>] ? xen_make_pte+0x1b/0x70
>> >[ 12.743378] [<ffffffff81014a6f>] init_espfix_ap+0x22f/0x3f0
>> >[ 12.743392] [<ffffffff8232079d>] init_espfix_bsp+0xee/0xf3
>> >[ 12.743404] [<ffffffff82317ffe>] start_kernel+0x3d6/0x441
>> >[ 12.743416] [<ffffffff82317a27>] ? set_init_arg+0x58/0x58
>> >[ 12.743428] [<ffffffff82317608>] x86_64_start_reservations+0x2a/0x2c
>> >[ 12.743441] [<ffffffff8231af8e>] xen_start_kernel+0x59b/0x59d
>> >[ 12.743468] ---[ end trace 20d3292a87f35842 ]---
>> >[ 12.743943] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>> >[ 12.744726] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> >[ 12.745043] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
>> >[ 12.745064] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
>> >[ 12.745709] Initializing cgroup subsys freezer
>> >[ 12.745733] Initializing cgroup subsys blkio
>> >
>> >If you need more info / complete logs, give me a call.
>>
>> This is caused by hpa's ESP fix for 16-bit programs leaking SP bits from
>> 64-bit kernels (commit 3891a04aafd668686239349ea58f3314ea2af86b).
>>
>> It's harmless in the sense that the only effect is that the workaround won't
>> get enabled.
> But oddly enough it only shows up on certain machines. I am wondering
> if the issue is some E820 is not rounded up to a page size and we allocate
> for the ESPFIX an not-4KB (ie, we cross-over) page. Hopefully the E820
> will shed the light.
You can find the dmesg attached, if you still need the complete serial log (with
Xen stuff), just give a shout !
>>
>> -boris
>>
>>
>>
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 85641 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-rc2-20140626+ (root@serveerstertje) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Jun 26 10:05:22 CEST 2014
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro verbose earlyprintk=xen mem=1536M console=hvc0 console=tty0 vga=794 video=vesafb r8169.use_dac=1 acpi_enforce_resources=lax max_loop=30 loop_max_part=10 debug loglevel=10 nomodeset xen-pciback.hide=(03:06.0)(04:00.*)(06:01.*)(07:00.*)(08:00.*)(0c:00.*) r8169.use_dac=1
[ 0.000000] Freeing 99-100 pfn range: 103 pages freed
[ 0.000000] 1-1 mapping on 99->100
[ 0.000000] 1-1 mapping on 9ff90->100000
[ 0.000000] 1-1 mapping on 560000->8000000
[ 0.000000] Released 103 pages of unused memory
[ 0.000000] Set 128975063 page(s) to 1-1 mapping
[ 0.000000] Populating 60000-60067 pfn range: 103 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000098fff] usable
[ 0.000000] Xen: [mem 0x0000000000099800-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000060066fff] usable
[ 0.000000] Xen: [mem 0x0000000060067000-0x000000009ff8ffff] unusable
[ 0.000000] Xen: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data
[ 0.000000] Xen: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000009ffe0000-0x000000009fffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000055fffffff] unusable
[ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] e820: remove [mem 0x60000000-0xfffffffffffffffe] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: user-defined physical RAM map:
[ 0.000000] user: [mem 0x0000000000000000-0x0000000000098fff] usable
[ 0.000000] user: [mem 0x0000000000099800-0x00000000000fffff] reserved
[ 0.000000] user: [mem 0x0000000000100000-0x000000005fffffff] usable
[ 0.000000] user: [mem 0x0000000060067000-0x000000009ff8ffff] unusable
[ 0.000000] user: [mem 0x000000009ff90000-0x000000009ff9dfff] ACPI data
[ 0.000000] user: [mem 0x000000009ff9e000-0x000000009ffdffff] ACPI NVS
[ 0.000000] user: [mem 0x000000009ffe0000-0x000000009fffffff] reserved
[ 0.000000] user: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] user: [mem 0x0000000100000000-0x000000055fffffff] unusable
[ 0.000000] user: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x60000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x5fe00000-0x5fffffff]
[ 0.000000] [mem 0x5fe00000-0x5fffffff] page 4k
[ 0.000000] BRK [0x031e9000, 0x031e9fff] PGTABLE
[ 0.000000] BRK [0x031ea000, 0x031eafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5fdfffff]
[ 0.000000] [mem 0x5c000000-0x5fdfffff] page 4k
[ 0.000000] BRK [0x031eb000, 0x031ebfff] PGTABLE
[ 0.000000] BRK [0x031ec000, 0x031ecfff] PGTABLE
[ 0.000000] BRK [0x031ed000, 0x031edfff] PGTABLE
[ 0.000000] BRK [0x031ee000, 0x031eefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
[ 0.000000] [mem 0x00100000-0x5bffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x035f6000-0x04415fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FB100 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000009FF90000 000048 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000009FF90200 000084 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000009FF905E0 009427 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009FF9E000 000040
[ 0.000000] ACPI: APIC 0x000000009FF90390 000088 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000009FF90420 00003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x000000009FF90460 000176 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000009FF9E040 000072 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: SRAT 0x000000009FF9A5E0 000108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 0x000000009FF9A6F0 000038 (v01 7640MS OEMHPET 20100913 MSFT 00000097)
[ 0.000000] ACPI: IVRS 0x000000009FF9A730 000110 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x000000009FF9A840 000DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5fffffff]
[ 0.000000] NODE_DATA [mem 0x5fd1e000-0x5fd28fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00098fff]
[ 0.000000] node 0: [mem 0x00100000-0x5fffffff]
[ 0.000000] On node 0 totalpages: 393112
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3992 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6080 pages used for memmap
[ 0.000000] DMA32 zone: 389120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] e820: [mem 0xa0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.5-unstable (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005f600000 s82112 r8192 d24384 u262144
[ 0.000000] pcpu-alloc: s82112 r8192 d24384 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386947
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro verbose earlyprintk=xen mem=1536M console=hvc0 console=tty0 vga=794 video=vesafb r8169.use_dac=1 acpi_enforce_resources=lax max_loop=30 loop_max_part=10 debug loglevel=10 nomodeset xen-pciback.hide=(03:06.0)(04:00.*)(06:01.*)(07:00.*)(08:00.*)(0c:00.*) r8169.use_dac=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x59c00000-0x5dc00000] (64MB) mapped at [ffff880059c00000-ffff88005dbfffff]
[ 0.000000] Memory: 1425508K/1572448K available (11315K kernel code, 1024K rwdata, 4384K rodata, 1088K init, 14040K bss, 146940K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS:4352 nr_irqs:1272 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 1
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [xenboot0] disabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 8159 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 3200.184 MHz processor
[ 12.723393] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.05 BogoMIPS (lpj=10667280)
[ 12.723414] pid_max: default: 32768 minimum: 301
[ 12.723433] ACPI: Core revision 20140424
[ 12.740681] ACPI: All ACPI Tables successfully acquired
[ 12.743145] ------------[ cut here ]------------
[ 12.743170] WARNING: CPU: 0 PID: 0 at arch/x86/xen/multicalls.c:129 xen_mc_flush+0x1ab/0x1c0()
[ 12.743186] Modules linked in:
[ 12.743196] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc2-20140626+ #1
[ 12.743209] Hardware name: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[ 12.743223] 0000000000000009 ffffffff82203d88 ffffffff81afdba7 ffffffff822184e0
[ 12.743242] 0000000000000000 ffffffff82203dc8 ffffffff810bfdb2 ffffffff81007858
[ 12.743261] 0000000000000000 0000000000000001 0000000000000000 ffff88005f60b120
[ 12.743280] Call Trace:
[ 12.743290] [<ffffffff81afdba7>] dump_stack+0x46/0x58
[ 12.743302] [<ffffffff810bfdb2>] warn_slowpath_common+0x82/0xb0
[ 12.743316] [<ffffffff81007858>] ? pte_pfn_to_mfn+0x88/0xa0
[ 12.743328] [<ffffffff810bfdf5>] warn_slowpath_null+0x15/0x20
[ 12.743341] [<ffffffff81004b6b>] xen_mc_flush+0x1ab/0x1c0
[ 12.743353] [<ffffffff810072fd>] xen_alloc_pte+0x1ad/0x220
[ 12.743364] [<ffffffff8100886b>] ? xen_make_pte+0x1b/0x70
[ 12.743378] [<ffffffff81014a6f>] init_espfix_ap+0x22f/0x3f0
[ 12.743392] [<ffffffff8232079d>] init_espfix_bsp+0xee/0xf3
[ 12.743404] [<ffffffff82317ffe>] start_kernel+0x3d6/0x441
[ 12.743416] [<ffffffff82317a27>] ? set_init_arg+0x58/0x58
[ 12.743428] [<ffffffff82317608>] x86_64_start_reservations+0x2a/0x2c
[ 12.743441] [<ffffffff8231af8e>] xen_start_kernel+0x59b/0x59d
[ 12.743468] ---[ end trace 20d3292a87f35842 ]---
[ 12.743943] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 12.744726] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 12.745043] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 12.745064] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 12.745709] Initializing cgroup subsys freezer
[ 12.745733] Initializing cgroup subsys blkio
[ 12.745796] tseg: 0000000000
[ 12.745832] CPU: Physical Processor ID: 0
[ 12.745841] CPU: Processor Core ID: 0
[ 12.745850] mce: CPU supports 2 MCE banks
[ 12.745868] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 12.745868] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 12.745868] tlb_flushall_shift: 6
[ 12.746011] Freeing SMP alternatives memory: 36K (ffffffff82412000 - ffffffff8241b000)
[ 12.747016] cpu 0 spinlock event irq 73
[ 12.747975] Performance Events: Broken PMU hardware detected, using software events only.
[ 12.748004] Failed to access perfctr msr (MSR c0010004 is 0)
[ 12.748619] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 12.748861] installing Xen timer for CPU 1
[ 12.748907] cpu 1 spinlock event irq 80
[ 12.749437] installing Xen timer for CPU 2
[ 12.749463] cpu 2 spinlock event irq 87
[ 12.749926] installing Xen timer for CPU 3
[ 12.749959] cpu 3 spinlock event irq 94
[ 12.750428] installing Xen timer for CPU 4
[ 12.750456] cpu 4 spinlock event irq 101
[ 12.750917] installing Xen timer for CPU 5
[ 12.750942] cpu 5 spinlock event irq 108
[ 12.751189] x86: Booted up 1 node, 6 CPUs
[ 12.752073] devtmpfs: initialized
[ 12.753401] xor: measuring software checksum speed
[ 12.783584] prefetch64-sse: 5527.200 MB/sec
[ 12.816959] generic_sse: 5534.400 MB/sec
[ 12.816968] xor: using function: generic_sse (5534.400 MB/sec)
[ 12.817210] NET: Registered protocol family 16
[ 12.817251] xen:grant_table: Grant tables using version 1 layout
[ 12.817275] Grant table initialized
[ 12.818147] node 0 link 0: io port [1000, ffffff]
[ 12.818164] TOM: 00000000a0000000 aka 2560M
[ 12.818175] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 12.818191] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 12.818207] node 0 link 0: mmio [f0000000, ffffffff]
[ 12.818222] node 0 link 0: mmio [a0000, bffff]
[ 12.818235] node 0 link 0: mmio [a0000000, dfffffff]
[ 12.818248] TOM2: 0000000560000000 aka 22016M
[ 12.818258] bus: [bus 00-07] on node 0 link 0
[ 12.818269] bus: 00 [io 0x0000-0xffff]
[ 12.818278] bus: 00 [mem 0xf0000000-0xffffffff]
[ 12.818288] bus: 00 [mem 0x000a0000-0x000bffff]
[ 12.818298] bus: 00 [mem 0xa0000000-0xdfffffff]
[ 12.818308] bus: 00 [mem 0x560000000-0xfcffffffff]
[ 12.818619] ACPI: bus type PCI registered
[ 12.818630] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 12.819094] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 12.819115] PCI: not using MMCONFIG
[ 12.819124] PCI: Using configuration type 1 for base access
[ 12.819135] PCI: Using configuration type 1 for extended access
[ 12.894387] raid6: sse2x1 3890 MB/s
[ 12.951747] raid6: sse2x2 5842 MB/s
[ 13.008956] raid6: sse2x4 5845 MB/s
[ 13.008966] raid6: using algorithm sse2x4 (5845 MB/s)
[ 13.008975] raid6: using intx1 recovery algorithm
[ 13.009136] ACPI: Added _OSI(Module Device)
[ 13.009148] ACPI: Added _OSI(Processor Device)
[ 13.009159] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 13.009170] ACPI: Added _OSI(Processor Aggregator Device)
[ 13.015370] ACPI: Executed 3 blocks of module-level executable AML code
[ 13.032996] ACPI: Interpreter enabled
[ 13.033015] ACPI: (supports S0 S5)
[ 13.033024] ACPI: Using IOAPIC for interrupt routing
[ 13.033071] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 13.034628] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 13.058329] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 13.069158] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 13.069197] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 13.069665] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 13.070446] PCI host bridge to bus 0000:00
[ 13.070459] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 13.070471] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 13.070483] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 13.070496] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 13.070509] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 13.070522] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff]
[ 13.070535] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 13.070556] pci_bus 0000:00: scanning bus
[ 13.070588] pci 0000:00:00.0: [1002:5a11] type 00 class 0x060000
[ 13.070604] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10
[ 13.071019] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 13.071329] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 13.071434] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 13.071470] pci 0000:00:02.0: PME# disabled
[ 13.071590] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 13.071689] pci 0000:00:03.0: [1002:5a17] type 01 class 0x060400
[ 13.071794] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 13.071808] pci 0000:00:03.0: PME# disabled
[ 13.071939] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 13.072057] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[ 13.072171] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 13.072189] pci 0000:00:05.0: PME# disabled
[ 13.072343] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 13.072454] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
[ 13.072580] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 13.072628] pci 0000:00:06.0: PME# disabled
[ 13.072749] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 13.072864] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 13.072978] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 13.072995] pci 0000:00:09.0: PME# disabled
[ 13.073115] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 13.073232] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 13.073355] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 13.073369] pci 0000:00:0a.0: PME# disabled
[ 13.073476] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 13.073579] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
[ 13.073682] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[ 13.073697] pci 0000:00:0b.0: PME# disabled
[ 13.073808] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 13.073913] pci 0000:00:0c.0: [1002:5a20] type 01 class 0x060400
[ 13.074017] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
[ 13.074031] pci 0000:00:0c.0: PME# disabled
[ 13.074138] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 13.074243] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
[ 13.074346] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[ 13.074360] pci 0000:00:0d.0: PME# disabled
[ 13.074468] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 13.074591] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 13.074631] pci 0000:00:11.0: reg 0x10: [io 0x6000-0x6007]
[ 13.074654] pci 0000:00:11.0: reg 0x14: [io 0x5000-0x5003]
[ 13.074677] pci 0000:00:11.0: reg 0x18: [io 0x3000-0x3007]
[ 13.074700] pci 0000:00:11.0: reg 0x1c: [io 0x2000-0x2003]
[ 13.074723] pci 0000:00:11.0: reg 0x20: [io 0x1000-0x100f]
[ 13.074746] pci 0000:00:11.0: reg 0x24: [mem 0xfddff000-0xfddff3ff]
[ 13.074996] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 13.075024] pci 0000:00:12.0: reg 0x10: [mem 0xfddf7000-0xfddf7fff]
[ 13.075226] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 13.075346] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 13.075386] pci 0000:00:12.2: reg 0x10: [mem 0xfddff400-0xfddff4ff]
[ 13.075553] pci 0000:00:12.2: supports D1 D2
[ 13.075564] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 13.075581] pci 0000:00:12.2: PME# disabled
[ 13.075697] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 13.075817] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 13.075854] pci 0000:00:13.0: reg 0x10: [mem 0xfddfc000-0xfddfcfff]
[ 13.076038] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 13.076149] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 13.076189] pci 0000:00:13.2: reg 0x10: [mem 0xfddff800-0xfddff8ff]
[ 13.076339] pci 0000:00:13.2: supports D1 D2
[ 13.076350] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 13.076368] pci 0000:00:13.2: PME# disabled
[ 13.076481] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 13.076601] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 13.076619] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x50
[ 13.076734] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x10
[ 13.076747] pci 0000:00:14.0: calling sb600_hpet_quirk+0x0/0x50
[ 13.076928] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 13.076970] pci 0000:00:14.2: reg 0x10: [mem 0xfddf8000-0xfddfbfff 64bit]
[ 13.077074] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 13.077089] pci 0000:00:14.2: PME# disabled
[ 13.077186] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 13.077283] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 13.077538] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 13.077680] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 13.077778] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 13.077807] pci 0000:00:14.5: reg 0x10: [mem 0xfddfd000-0xfddfdfff]
[ 13.078002] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 13.078121] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 13.078251] pci 0000:00:15.0: supports D1 D2
[ 13.078373] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 13.078491] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 13.078521] pci 0000:00:16.0: reg 0x10: [mem 0xfddfe000-0xfddfefff]
[ 13.078717] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 13.078831] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 13.078871] pci 0000:00:16.2: reg 0x10: [mem 0xfddffc00-0xfddffcff]
[ 13.079007] pci 0000:00:16.2: supports D1 D2
[ 13.079018] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 13.079035] pci 0000:00:16.2: PME# disabled
[ 13.079148] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 13.079270] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 13.079307] pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x10
[ 13.079542] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 13.079560] pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x10
[ 13.079795] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 13.079813] pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x10
[ 13.080035] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 13.080053] pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x10
[ 13.080254] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 13.080269] pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x10
[ 13.080472] pci_bus 0000:00: fixups for bus
[ 13.080485] pci 0000:00:02.0: scanning [bus 0d-0d] behind bridge, pass 0
[ 13.080579] pci_bus 0000:0d: scanning bus
[ 13.080606] pci 0000:0d:00.0: [1002:95c5] type 00 class 0x030000
[ 13.080642] pci 0000:0d:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 13.080672] pci 0000:0d:00.0: reg 0x18: [mem 0xfe9e0000-0xfe9effff 64bit]
[ 13.080696] pci 0000:0d:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 13.080728] pci 0000:0d:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 13.080797] pci 0000:0d:00.0: supports D1 D2
[ 13.080910] pci 0000:0d:00.1: [1002:aa28] type 00 class 0x040300
[ 13.080949] pci 0000:0d:00.1: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 13.081071] pci 0000:0d:00.1: supports D1 D2
[ 13.086210] pci_bus 0000:0d: fixups for bus
[ 13.086224] pci 0000:00:02.0: PCI bridge to [bus 0d]
[ 13.086244] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 13.086259] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 13.086276] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 13.086291] pci_bus 0000:0d: bus scan returning with max=0d
[ 13.086305] pci 0000:00:03.0: scanning [bus 0c-0c] behind bridge, pass 0
[ 13.086409] pci_bus 0000:0c: scanning bus
[ 13.086444] pci 0000:0c:00.0: [1002:6759] type 00 class 0x030000
[ 13.086493] pci 0000:0c:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 13.086524] pci 0000:0c:00.0: reg 0x18: [mem 0xfe8c0000-0xfe8dffff 64bit]
[ 13.086547] pci 0000:0c:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 13.086577] pci 0000:0c:00.0: reg 0x30: [mem 0xfe8a0000-0xfe8bffff pref]
[ 13.086661] pci 0000:0c:00.0: supports D1 D2
[ 13.086802] pci 0000:0c:00.1: [1002:aa90] type 00 class 0x040300
[ 13.086854] pci 0000:0c:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[ 13.086987] pci 0000:0c:00.1: supports D1 D2
[ 13.093012] pci_bus 0000:0c: fixups for bus
[ 13.093025] pci 0000:00:03.0: PCI bridge to [bus 0c]
[ 13.093041] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 13.093055] pci 0000:00:03.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 13.093073] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 13.093087] pci_bus 0000:0c: bus scan returning with max=0c
[ 13.093101] pci 0000:00:05.0: scanning [bus 0b-0b] behind bridge, pass 0
[ 13.093222] pci_bus 0000:0b: scanning bus
[ 13.093258] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
[ 13.093294] pci 0000:0b:00.0: reg 0x10: [io 0xc800-0xc8ff]
[ 13.093344] pci 0000:0b:00.0: reg 0x18: [mem 0xbffff000-0xbfffffff 64bit pref]
[ 13.093381] pci 0000:0b:00.0: reg 0x20: [mem 0xbfff8000-0xbfffbfff 64bit pref]
[ 13.093410] pci 0000:0b:00.0: reg 0x30: [mem 0xfe7e0000-0xfe7fffff pref]
[ 13.093523] pci 0000:0b:00.0: supports D1 D2
[ 13.093534] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 13.093552] pci 0000:0b:00.0: PME# disabled
[ 13.099754] pci_bus 0000:0b: fixups for bus
[ 13.099768] pci 0000:00:05.0: PCI bridge to [bus 0b]
[ 13.099785] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 13.099801] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 13.099821] pci 0000:00:05.0: bridge window [mem 0xbff00000-0xbfffffff 64bit pref]
[ 13.099838] pci_bus 0000:0b: bus scan returning with max=0b
[ 13.099854] pci 0000:00:06.0: scanning [bus 0a-0a] behind bridge, pass 0
[ 13.099969] pci_bus 0000:0a: scanning bus
[ 13.100005] pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
[ 13.100045] pci 0000:0a:00.0: reg 0x10: [io 0xb800-0xb8ff]
[ 13.100091] pci 0000:0a:00.0: reg 0x18: [mem 0xbfeff000-0xbfefffff 64bit pref]
[ 13.100128] pci 0000:0a:00.0: reg 0x20: [mem 0xbfef8000-0xbfefbfff 64bit pref]
[ 13.100156] pci 0000:0a:00.0: reg 0x30: [mem 0xfe6e0000-0xfe6fffff pref]
[ 13.100265] pci 0000:0a:00.0: supports D1 D2
[ 13.100276] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 13.100294] pci 0000:0a:00.0: PME# disabled
[ 13.106612] pci_bus 0000:0a: fixups for bus
[ 13.106625] pci 0000:00:06.0: PCI bridge to [bus 0a]
[ 13.106640] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
[ 13.106654] pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 13.106672] pci 0000:00:06.0: bridge window [mem 0xbfe00000-0xbfefffff 64bit pref]
[ 13.106686] pci_bus 0000:0a: bus scan returning with max=0a
[ 13.106700] pci 0000:00:09.0: scanning [bus 09-09] behind bridge, pass 0
[ 13.106820] pci_bus 0000:09: scanning bus
[ 13.106857] pci 0000:09:00.0: [1033:0194] type 00 class 0x0c0330
[ 13.106899] pci 0000:09:00.0: reg 0x10: [mem 0xfe5fe000-0xfe5fffff 64bit]
[ 13.107057] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 13.107074] pci 0000:09:00.0: PME# disabled
[ 13.113284] pci_bus 0000:09: fixups for bus
[ 13.113297] pci 0000:00:09.0: PCI bridge to [bus 09]
[ 13.113315] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 13.113332] pci_bus 0000:09: bus scan returning with max=09
[ 13.113349] pci 0000:00:0a.0: scanning [bus 08-08] behind bridge, pass 0
[ 13.113459] pci_bus 0000:08: scanning bus
[ 13.113487] pci 0000:08:00.0: [14f1:8210] type 00 class 0x040000
[ 13.113548] pci 0000:08:00.0: reg 0x10: [mem 0xfe200000-0xfe3fffff 64bit]
[ 13.113756] pci 0000:08:00.0: supports D1 D2
[ 13.113766] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot
[ 13.113784] pci 0000:08:00.0: PME# disabled
[ 13.120162] pci_bus 0000:08: fixups for bus
[ 13.120176] pci 0000:00:0a.0: PCI bridge to [bus 08]
[ 13.120193] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe3fffff]
[ 13.120210] pci_bus 0000:08: bus scan returning with max=08
[ 13.120224] pci 0000:00:0b.0: scanning [bus 07-07] behind bridge, pass 0
[ 13.120344] pci_bus 0000:07: scanning bus
[ 13.120374] pci 0000:07:00.0: [1002:6759] type 00 class 0x030000
[ 13.120412] pci 0000:07:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 13.120443] pci 0000:07:00.0: reg 0x18: [mem 0xfe1c0000-0xfe1dffff 64bit]
[ 13.120466] pci 0000:07:00.0: reg 0x20: [io 0xa000-0xa0ff]
[ 13.120499] pci 0000:07:00.0: reg 0x30: [mem 0xfe1a0000-0xfe1bffff pref]
[ 13.120584] pci 0000:07:00.0: supports D1 D2
[ 13.120723] pci 0000:07:00.1: [1002:aa90] type 00 class 0x040300
[ 13.120764] pci 0000:07:00.1: reg 0x10: [mem 0xfe1fc000-0xfe1fffff 64bit]
[ 13.120911] pci 0000:07:00.1: supports D1 D2
[ 13.126966] pci_bus 0000:07: fixups for bus
[ 13.126979] pci 0000:00:0b.0: PCI bridge to [bus 07]
[ 13.126995] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
[ 13.127012] pci 0000:00:0b.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 13.127029] pci 0000:00:0b.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 13.127044] pci_bus 0000:07: bus scan returning with max=07
[ 13.127058] pci 0000:00:0c.0: scanning [bus 05-06] behind bridge, pass 0
[ 13.127189] pci_bus 0000:05: scanning bus
[ 13.127231] pci 0000:05:00.0: [104c:8231] type 01 class 0x060400
[ 13.127409] pci 0000:05:00.0: supports D1 D2
[ 13.127529] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 13.127561] pci_bus 0000:05: fixups for bus
[ 13.127571] pci 0000:00:0c.0: PCI bridge to [bus 05-06]
[ 13.127602] pci 0000:00:0c.0: bridge window [mem 0xfe000000-0xfe0fffff]
[ 13.127622] pci 0000:05:00.0: scanning [bus 06-06] behind bridge, pass 0
[ 13.127735] pci_bus 0000:06: scanning bus
[ 13.127765] pci 0000:06:01.0: [1033:0035] type 00 class 0x0c0310
[ 13.127808] pci 0000:06:01.0: reg 0x10: [mem 0xfe0fd000-0xfe0fdfff]
[ 13.127966] pci 0000:06:01.0: supports D1 D2
[ 13.127975] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot
[ 13.127991] pci 0000:06:01.0: PME# disabled
[ 13.128103] pci 0000:06:01.1: [1033:0035] type 00 class 0x0c0310
[ 13.128159] pci 0000:06:01.1: reg 0x10: [mem 0xfe0fe000-0xfe0fefff]
[ 13.128324] pci 0000:06:01.1: supports D1 D2
[ 13.128335] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot
[ 13.128353] pci 0000:06:01.1: PME# disabled
[ 13.128470] pci 0000:06:01.2: [1033:00e0] type 00 class 0x0c0320
[ 13.128526] pci 0000:06:01.2: reg 0x10: [mem 0xfe0ffc00-0xfe0ffcff]
[ 13.128682] pci 0000:06:01.2: supports D1 D2
[ 13.128691] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot
[ 13.128707] pci 0000:06:01.2: PME# disabled
[ 13.128890] pci_bus 0000:06: fixups for bus
[ 13.128899] pci 0000:05:00.0: PCI bridge to [bus 06]
[ 13.128922] pci 0000:05:00.0: bridge window [mem 0xfe000000-0xfe0fffff]
[ 13.128943] pci_bus 0000:06: bus scan returning with max=06
[ 13.128959] pci 0000:05:00.0: scanning [bus 06-06] behind bridge, pass 1
[ 13.128977] pci_bus 0000:05: bus scan returning with max=06
[ 13.128991] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 0
[ 13.129092] pci_bus 0000:04: scanning bus
[ 13.129125] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 13.129163] pci 0000:04:00.0: reg 0x10: [mem 0xfdffe000-0xfdffffff 64bit]
[ 13.129307] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 13.129323] pci 0000:04:00.0: PME# disabled
[ 13.133674] pci_bus 0000:04: fixups for bus
[ 13.133687] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 13.133733] pci 0000:00:0d.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 13.133750] pci_bus 0000:04: bus scan returning with max=04
[ 13.133775] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 0
[ 13.133854] pci_bus 0000:03: scanning bus
[ 13.133896] pci 0000:03:06.0: [13f6:0111] type 00 class 0x040100
[ 13.133938] pci 0000:03:06.0: reg 0x10: [io 0x9800-0x98ff]
[ 13.134090] pci 0000:03:06.0: supports D1 D2
[ 13.134248] pci_bus 0000:03: fixups for bus
[ 13.134259] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 13.134277] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 13.134298] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 13.134315] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 13.134343] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 13.134359] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 13.134375] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xdfffffff] (subtractive decode)
[ 13.134390] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 13.134406] pci_bus 0000:03: bus scan returning with max=03
[ 13.134421] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 0
[ 13.134527] pci_bus 0000:02: scanning bus
[ 13.134539] pci_bus 0000:02: fixups for bus
[ 13.134548] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 13.134576] pci_bus 0000:02: bus scan returning with max=02
[ 13.134590] pci 0000:00:02.0: scanning [bus 0d-0d] behind bridge, pass 1
[ 13.134608] pci 0000:00:03.0: scanning [bus 0c-0c] behind bridge, pass 1
[ 13.134625] pci 0000:00:05.0: scanning [bus 0b-0b] behind bridge, pass 1
[ 13.134642] pci 0000:00:06.0: scanning [bus 0a-0a] behind bridge, pass 1
[ 13.134659] pci 0000:00:09.0: scanning [bus 09-09] behind bridge, pass 1
[ 13.134676] pci 0000:00:0a.0: scanning [bus 08-08] behind bridge, pass 1
[ 13.134693] pci 0000:00:0b.0: scanning [bus 07-07] behind bridge, pass 1
[ 13.134710] pci 0000:00:0c.0: scanning [bus 05-06] behind bridge, pass 1
[ 13.134727] pci 0000:00:0d.0: scanning [bus 04-04] behind bridge, pass 1
[ 13.134746] pci 0000:00:14.4: scanning [bus 03-03] behind bridge, pass 1
[ 13.134765] pci 0000:00:15.0: scanning [bus 02-02] behind bridge, pass 1
[ 13.134782] pci_bus 0000:00: bus scan returning with max=0d
[ 13.134840] pci_bus 0000:00: on NUMA node 0
[ 13.135145] xen: registering gsi 13 triggering 1 polarity 0
[ 13.135643] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
[ 13.135787] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[ 13.135923] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[ 13.136050] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
[ 13.136151] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15)
[ 13.136237] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
[ 13.136327] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
[ 13.136411] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15)
[ 13.136692] xen:balloon: Initialising balloon driver
[ 13.136910] xen_balloon: Initialising balloon driver
[ 13.137393] vgaarb: device added: PCI:0000:0d:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 13.137421] vgaarb: device added: PCI:0000:0c:00.0,decodes=io+mem,owns=none,locks=none
[ 13.137444] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=none,locks=none
[ 13.137464] vgaarb: loaded
[ 13.137471] vgaarb: bridge control possible 0000:07:00.0
[ 13.137482] vgaarb: bridge control possible 0000:0c:00.0
[ 13.137493] vgaarb: bridge control possible 0000:0d:00.0
[ 13.137650] SCSI subsystem initialized
[ 13.137713] libata version 3.00 loaded.
[ 13.137807] ACPI: bus type USB registered
[ 13.137903] usbcore: registered new interface driver usbfs
[ 13.137942] usbcore: registered new interface driver hub
[ 13.138092] usbcore: registered new device driver usb
[ 13.138180] Linux video capture interface: v2.00
[ 13.138263] pps_core: LinuxPPS API ver. 1 registered
[ 13.138276] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 13.138306] PTP clock support registered
[ 13.138442] Advanced Linux Sound Architecture Driver Initialized.
[ 13.138457] PCI: Using ACPI for IRQ routing
[ 13.149074] PCI: pci_cache_line_size set to 64 bytes
[ 13.149101] pci 0000:0d:00.0: BAR 0: reserving [mem 0xd0000000-0xdfffffff flags 0x14220c] (d=0, p=0)
[ 13.149118] pci 0000:0d:00.0: BAR 2: reserving [mem 0xfe9e0000-0xfe9effff flags 0x140204] (d=0, p=0)
[ 13.149135] pci 0000:0d:00.0: BAR 4: reserving [io 0xe000-0xe0ff flags 0x40101] (d=0, p=0)
[ 13.149151] pci 0000:0d:00.1: BAR 0: reserving [mem 0xfe9fc000-0xfe9fffff flags 0x140204] (d=0, p=0)
[ 13.149172] pci 0000:0c:00.1: BAR 0: reserving [mem 0xfe8fc000-0xfe8fffff flags 0x140204] (d=0, p=0)
[ 13.149191] pci 0000:0b:00.0: BAR 0: reserving [io 0xc800-0xc8ff flags 0x40101] (d=0, p=0)
[ 13.149206] pci 0000:0b:00.0: BAR 2: reserving [mem 0xbffff000-0xbfffffff flags 0x14220c] (d=0, p=0)
[ 13.149222] pci 0000:0b:00.0: BAR 4: reserving [mem 0xbfff8000-0xbfffbfff flags 0x14220c] (d=0, p=0)
[ 13.149242] pci 0000:0a:00.0: BAR 0: reserving [io 0xb800-0xb8ff flags 0x40101] (d=0, p=0)
[ 13.149256] pci 0000:0a:00.0: BAR 2: reserving [mem 0xbfeff000-0xbfefffff flags 0x14220c] (d=0, p=0)
[ 13.149272] pci 0000:0a:00.0: BAR 4: reserving [mem 0xbfef8000-0xbfefbfff flags 0x14220c] (d=0, p=0)
[ 13.149291] pci 0000:09:00.0: BAR 0: reserving [mem 0xfe5fe000-0xfe5fffff flags 0x140204] (d=0, p=0)
[ 13.149311] pci 0000:08:00.0: BAR 0: reserving [mem 0xfe200000-0xfe3fffff flags 0x140204] (d=0, p=0)
[ 13.149332] pci 0000:07:00.1: BAR 0: reserving [mem 0xfe1fc000-0xfe1fffff flags 0x140204] (d=0, p=0)
[ 13.149353] pci 0000:06:01.0: BAR 0: reserving [mem 0xfe0fd000-0xfe0fdfff flags 0x40200] (d=0, p=0)
[ 13.149372] pci 0000:06:01.1: BAR 0: reserving [mem 0xfe0fe000-0xfe0fefff flags 0x40200] (d=0, p=0)
[ 13.149390] pci 0000:06:01.2: BAR 0: reserving [mem 0xfe0ffc00-0xfe0ffcff flags 0x40200] (d=0, p=0)
[ 13.149409] pci 0000:04:00.0: BAR 0: reserving [mem 0xfdffe000-0xfdffffff flags 0x140204] (d=0, p=0)
[ 13.149427] pci 0000:00:11.0: BAR 0: reserving [io 0x6000-0x6007 flags 0x40101] (d=0, p=0)
[ 13.149442] pci 0000:00:11.0: BAR 1: reserving [io 0x5000-0x5003 flags 0x40101] (d=0, p=0)
[ 13.149457] pci 0000:00:11.0: BAR 2: reserving [io 0x3000-0x3007 flags 0x40101] (d=0, p=0)
[ 13.149472] pci 0000:00:11.0: BAR 3: reserving [io 0x2000-0x2003 flags 0x40101] (d=0, p=0)
[ 13.149487] pci 0000:00:11.0: BAR 4: reserving [io 0x1000-0x100f flags 0x40101] (d=0, p=0)
[ 13.149502] pci 0000:00:11.0: BAR 5: reserving [mem 0xfddff000-0xfddff3ff flags 0x40200] (d=0, p=0)
[ 13.149521] pci 0000:00:12.0: BAR 0: reserving [mem 0xfddf7000-0xfddf7fff flags 0x40200] (d=0, p=0)
[ 13.149545] pci 0000:00:12.2: BAR 0: reserving [mem 0xfddff400-0xfddff4ff flags 0x40200] (d=0, p=0)
[ 13.149563] pci 0000:00:13.0: BAR 0: reserving [mem 0xfddfc000-0xfddfcfff flags 0x40200] (d=0, p=0)
[ 13.149581] pci 0000:00:13.2: BAR 0: reserving [mem 0xfddff800-0xfddff8ff flags 0x40200] (d=0, p=0)
[ 13.149600] pci 0000:00:14.2: BAR 0: reserving [mem 0xfddf8000-0xfddfbfff flags 0x140204] (d=0, p=0)
[ 13.149622] pci 0000:03:06.0: BAR 0: reserving [io 0x9800-0x98ff flags 0x40101] (d=0, p=0)
[ 13.149639] pci 0000:00:14.5: BAR 0: reserving [mem 0xfddfd000-0xfddfdfff flags 0x40200] (d=0, p=0)
[ 13.149659] pci 0000:00:16.0: BAR 0: reserving [mem 0xfddfe000-0xfddfefff flags 0x40200] (d=0, p=0)
[ 13.149697] pci 0000:00:16.2: BAR 0: reserving [mem 0xfddffc00-0xfddffcff flags 0x40200] (d=0, p=0)
[ 13.149728] pci 0000:0c:00.0: BAR 0: reserving [mem 0xc0000000-0xcfffffff flags 0x14220c] (d=1, p=1)
[ 13.149744] pci 0000:0c:00.0: BAR 2: reserving [mem 0xfe8c0000-0xfe8dffff flags 0x140204] (d=1, p=1)
[ 13.149760] pci 0000:0c:00.0: BAR 4: reserving [io 0xd000-0xd0ff flags 0x40101] (d=1, p=1)
[ 13.149792] pci 0000:07:00.0: BAR 0: reserving [mem 0xa0000000-0xafffffff flags 0x14220c] (d=1, p=1)
[ 13.149808] pci 0000:07:00.0: BAR 2: reserving [mem 0xfe1c0000-0xfe1dffff flags 0x140204] (d=1, p=1)
[ 13.149824] pci 0000:07:00.0: BAR 4: reserving [io 0xa000-0xa0ff flags 0x40101] (d=1, p=1)
[ 13.149883] e820: reserve RAM buffer [mem 0x00099000-0x0009ffff]
[ 13.150342] Bluetooth: Core ver 2.19
[ 13.150408] NET: Registered protocol family 31
[ 13.150419] Bluetooth: HCI device and connection manager initialized
[ 13.150447] Bluetooth: HCI socket layer initialized
[ 13.150461] Bluetooth: L2CAP socket layer initialized
[ 13.150487] Bluetooth: SCO socket layer initialized
[ 13.150926] Switched to clocksource xen
[ 13.151196] FS-Cache: Loaded
[ 13.151248] pnp: PnP ACPI init
[ 13.151290] ACPI: bus type PNP registered
[ 13.151526] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 13.151585] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 13.151721] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved
[ 13.151737] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 13.151851] xen: registering gsi 8 triggering 1 polarity 0
[ 13.151920] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 13.152239] xen: registering gsi 4 triggering 1 polarity 0
[ 13.152250] Already setup the GSI :4
[ 13.152259] pnp 00:03: [dma 0 disabled]
[ 13.152341] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 13.152525] system 00:04: [io 0x0600-0x06df] has been reserved
[ 13.152539] system 00:04: [io 0x0ae0-0x0aef] has been reserved
[ 13.152552] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 13.152732] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 13.152747] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 13.152761] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 13.153073] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 13.153086] system 00:06: [io 0x040b] has been reserved
[ 13.153097] system 00:06: [io 0x04d6] has been reserved
[ 13.153109] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 13.153124] system 00:06: [io 0x0c14] has been reserved
[ 13.153135] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 13.153147] system 00:06: [io 0x0c52] has been reserved
[ 13.153159] system 00:06: [io 0x0c6c] has been reserved
[ 13.153170] system 00:06: [io 0x0c6f] has been reserved
[ 13.153182] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 13.153195] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 13.153208] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 13.153220] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 13.153232] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 13.153244] system 00:06: [io 0x0800-0x089f] could not be reserved
[ 13.153256] system 00:06: [io 0x0b00-0x0b1f] has been reserved
[ 13.153268] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 13.153281] system 00:06: [io 0x0900-0x090f] has been reserved
[ 13.153293] system 00:06: [io 0x0910-0x091f] has been reserved
[ 13.153305] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 13.153317] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
[ 13.153330] system 00:06: [mem 0xfec10000-0xfec1001f] has been reserved
[ 13.153343] system 00:06: [mem 0xfed80000-0xfed80fff] has been reserved
[ 13.153358] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 13.153503] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 13.153518] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 13.153727] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 13.153742] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 13.153757] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 13.153772] system 00:08: [mem 0x00100000-0x9fffffff] could not be reserved
[ 13.153794] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[ 13.153814] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 13.153970] pnp: PnP ACPI: found 9 devices
[ 13.153981] ACPI: bus type PNP unregistered
[ 13.154379] pciback 0000:0c:00.0: seizing device
[ 13.154411] pciback 0000:0c:00.1: seizing device
[ 13.154460] pciback 0000:08:00.0: seizing device
[ 13.154479] pciback 0000:07:00.0: seizing device
[ 13.154500] pciback 0000:07:00.1: seizing device
[ 13.154547] pciback 0000:06:01.0: seizing device
[ 13.154565] pciback 0000:06:01.1: seizing device
[ 13.154584] pciback 0000:06:01.2: seizing device
[ 13.154602] pciback 0000:04:00.0: seizing device
[ 13.154621] pciback 0000:03:06.0: seizing device
[ 13.162691] PM-Timer failed consistency check (0xffffff) - aborting.
[ 13.162848] pci 0000:00:02.0: PCI bridge to [bus 0d]
[ 13.162870] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 13.162885] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 13.162900] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 13.162919] pci 0000:00:03.0: PCI bridge to [bus 0c]
[ 13.162930] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 13.162945] pci 0000:00:03.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 13.162959] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 13.162977] pci 0000:00:05.0: PCI bridge to [bus 0b]
[ 13.162988] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 13.163003] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 13.163018] pci 0000:00:05.0: bridge window [mem 0xbff00000-0xbfffffff 64bit pref]
[ 13.163036] pci 0000:00:06.0: PCI bridge to [bus 0a]
[ 13.163047] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
[ 13.163061] pci 0000:00:06.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 13.163076] pci 0000:00:06.0: bridge window [mem 0xbfe00000-0xbfefffff 64bit pref]
[ 13.163094] pci 0000:00:09.0: PCI bridge to [bus 09]
[ 13.163107] pci 0000:00:09.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 13.163126] pci 0000:00:0a.0: PCI bridge to [bus 08]
[ 13.163139] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe3fffff]
[ 13.163158] pci 0000:00:0b.0: PCI bridge to [bus 07]
[ 13.163169] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
[ 13.163183] pci 0000:00:0b.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 13.163198] pci 0000:00:0b.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 13.163216] pci 0000:05:00.0: PCI bridge to [bus 06]
[ 13.163232] pci 0000:05:00.0: bridge window [mem 0xfe000000-0xfe0fffff]
[ 13.163256] pci 0000:00:0c.0: PCI bridge to [bus 05-06]
[ 13.163269] pci 0000:00:0c.0: bridge window [mem 0xfe000000-0xfe0fffff]
[ 13.163288] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 13.163301] pci 0000:00:0d.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 13.163320] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 13.163365] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 13.163390] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 13.163413] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 13.163424] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 13.163435] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 13.163446] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 13.163458] pci_bus 0000:00: resource 8 [mem 0xa0000000-0xdfffffff]
[ 13.163469] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 13.163481] pci_bus 0000:0d: resource 0 [io 0xe000-0xefff]
[ 13.163491] pci_bus 0000:0d: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 13.163503] pci_bus 0000:0d: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 13.163516] pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff]
[ 13.163527] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 13.163539] pci_bus 0000:0c: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 13.163552] pci_bus 0000:0b: resource 0 [io 0xc000-0xcfff]
[ 13.163562] pci_bus 0000:0b: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 13.163574] pci_bus 0000:0b: resource 2 [mem 0xbff00000-0xbfffffff 64bit pref]
[ 13.163588] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff]
[ 13.163598] pci_bus 0000:0a: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 13.163610] pci_bus 0000:0a: resource 2 [mem 0xbfe00000-0xbfefffff 64bit pref]
[ 13.163623] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 13.163635] pci_bus 0000:08: resource 1 [mem 0xfe200000-0xfe3fffff]
[ 13.163647] pci_bus 0000:07: resource 0 [io 0xa000-0xafff]
[ 13.163657] pci_bus 0000:07: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 13.163669] pci_bus 0000:07: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 13.163683] pci_bus 0000:05: resource 1 [mem 0xfe000000-0xfe0fffff]
[ 13.163694] pci_bus 0000:06: resource 1 [mem 0xfe000000-0xfe0fffff]
[ 13.163706] pci_bus 0000:04: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 13.163718] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 13.163728] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 13.163739] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 13.163749] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 13.163761] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 13.163773] pci_bus 0000:03: resource 8 [mem 0xa0000000-0xdfffffff]
[ 13.163784] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 13.163836] NET: Registered protocol family 2
[ 13.164120] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 13.164546] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
[ 13.165397] TCP: Hash tables configured (established 16384 bind 16384)
[ 13.165473] TCP: reno registered
[ 13.165524] UDP hash table entries: 1024 (order: 5, 163840 bytes)
[ 13.165671] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
[ 13.165938] NET: Registered protocol family 1
[ 13.165990] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x50
[ 13.166012] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.166163] xen: registering gsi 18 triggering 0 polarity 1
[ 13.166189] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 13.241200] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.241330] xen: registering gsi 17 triggering 0 polarity 1
[ 13.241352] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 13.241515] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.241642] xen: registering gsi 18 triggering 0 polarity 1
[ 13.241653] Already setup the GSI :18
[ 13.317881] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.318010] xen: registering gsi 17 triggering 0 polarity 1
[ 13.318021] Already setup the GSI :17
[ 13.318177] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.318302] xen: registering gsi 18 triggering 0 polarity 1
[ 13.318312] Already setup the GSI :18
[ 13.394548] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.394676] xen: registering gsi 18 triggering 0 polarity 1
[ 13.394688] Already setup the GSI :18
[ 13.471212] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.471340] xen: registering gsi 17 triggering 0 polarity 1
[ 13.471352] Already setup the GSI :17
[ 13.471501] pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x80
[ 13.471518] pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x80
[ 13.471533] pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x80
[ 13.471549] pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x80
[ 13.471564] pci 0000:00:18.4: calling quirk_amd_nb_node+0x0/0x80
[ 13.471582] pci 0000:0d:00.0: calling pci_fixup_video+0x0/0xe0
[ 13.471596] pci 0000:0d:00.0: Boot video device
[ 13.471612] pciback 0000:0c:00.0: calling pci_fixup_video+0x0/0xe0
[ 13.471661] pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.471786] xen: registering gsi 53 triggering 0 polarity 1
[ 13.471807] xen: --> pirq=53 -> irq=53 (gsi=53)
[ 13.471859] xen: registering gsi 48 triggering 0 polarity 1
[ 13.471875] xen: --> pirq=48 -> irq=48 (gsi=48)
[ 13.471948] pciback 0000:07:00.0: calling pci_fixup_video+0x0/0xe0
[ 13.471968] pci 0000:05:00.0: calling quirk_xio2000a+0x0/0xa0
[ 13.471979] pci 0000:05:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
[ 13.472006] pciback 0000:06:01.0: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.472134] xen: registering gsi 54 triggering 0 polarity 1
[ 13.472157] xen: --> pirq=54 -> irq=54 (gsi=54)
[ 13.472215] xen: registering gsi 37 triggering 0 polarity 1
[ 13.472231] xen: --> pirq=37 -> irq=37 (gsi=37)
[ 13.472301] pciback 0000:06:01.1: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.472345] xen: registering gsi 38 triggering 0 polarity 1
[ 13.472361] xen: --> pirq=38 -> irq=38 (gsi=38)
[ 13.472429] pciback 0000:06:01.2: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.472474] xen: registering gsi 39 triggering 0 polarity 1
[ 13.472490] xen: --> pirq=39 -> irq=39 (gsi=39)
[ 13.472563] pciback 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x6f0
[ 13.472691] xen: registering gsi 54 triggering 0 polarity 1
[ 13.472702] Already setup the GSI :54
[ 13.472743] xen: registering gsi 40 triggering 0 polarity 1
[ 13.472758] xen: --> pirq=40 -> irq=40 (gsi=40)
[ 13.472860] PCI: CLS 64 bytes, default 64
[ 13.473010] Trying to unpack rootfs image as initramfs...
[ 13.501901] Freeing initrd memory: 14464K (ffff8800035f6000 - ffff880004416000)
[ 13.504648] Scanning for low memory corruption every 60 seconds
[ 13.507113] sha1_ssse3: Neither AVX nor AVX2 nor SSSE3 is available/usable.
[ 13.507132] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 13.507146] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 13.507158] AVX or AES-NI instructions are not detected.
[ 13.507169] AVX instructions are not detected.
[ 13.507178] AVX instructions are not detected.
[ 13.507188] AVX2 or AES-NI instructions are not detected.
[ 13.507199] AVX2 instructions are not detected.
[ 13.507794] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 13.508005] audit: initializing netlink subsys (disabled)
[ 13.508099] audit: type=2000 audit(1403772651.685:1): initialized
[ 13.508574] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 13.514303] VFS: Disk quotas dquot_6.5.2
[ 13.514423] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 13.516474] ntfs: driver 2.1.30 [Flags: R/W].
[ 13.516902] fuse init (API version 7.23)
[ 13.518274] gfs2: GFS2 installed
[ 13.518419] ceph: loaded (mds proto 32)
[ 13.518437] msgmni has been set to 2812
[ 13.520567] bounce: pool size: 64 pages
[ 13.520675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 13.520713] io scheduler noop registered
[ 13.520723] io scheduler deadline registered
[ 13.521001] io scheduler cfq registered (default)
[ 13.521280] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 13.521291] crc32: self tests passed, processed 225944 bytes in 123344 nsec
[ 13.521431] crc32c: CRC_LE_BITS = 64
[ 13.521438] crc32c: self tests passed, processed 225944 bytes in 60783 nsec
[ 13.701750] crc32_combine: 8373 self tests passed
[ 13.881523] crc32c_combine: 8373 self tests passed
[ 13.881902] xen: registering gsi 52 triggering 0 polarity 1
[ 13.881947] xen: --> pirq=52 -> irq=52 (gsi=52)
[ 13.882283] xen: registering gsi 52 triggering 0 polarity 1
[ 13.882296] Already setup the GSI :52
[ 13.882536] xen: registering gsi 52 triggering 0 polarity 1
[ 13.882549] Already setup the GSI :52
[ 13.882785] xen: registering gsi 53 triggering 0 polarity 1
[ 13.882797] Already setup the GSI :53
[ 13.883194] xen: registering gsi 54 triggering 0 polarity 1
[ 13.883207] Already setup the GSI :54
[ 13.883528] xen: registering gsi 54 triggering 0 polarity 1
[ 13.883542] Already setup the GSI :54
[ 13.884053] xen: registering gsi 16 triggering 0 polarity 1
[ 13.884072] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 13.884469] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.884604] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 13.884620] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[ 13.884637] cpcihp_generic: not configured, disabling.
[ 13.884733] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.886124] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[ 13.886393] usbcore: registered new interface driver udlfb
[ 13.886428] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 13.886442] vesafb: scrolling: redraw
[ 13.886452] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 13.887483] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010580000, using 10240k, total 16384k
[ 13.909348] Console: switching to colour frame buffer device 160x64
[ 13.929771] fb0: VESA VGA frame buffer device
[ 13.930118] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 13.930364] ACPI: Power Button [PWRB]
[ 13.930536] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 13.930726] ACPI: Power Button [PWRF]
[ 13.931507] Warning: Processor Platform Limit not supported.
[ 13.932353] xen:xen_evtchn: Event-channel device installed
[ 13.932875] xen: registering gsi 22 triggering 0 polarity 1
[ 13.933032] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 13.957931] xen: registering gsi 40 triggering 0 polarity 1
[ 13.958077] Already setup the GSI :40
[ 14.967759] pciback 0000:04:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a)
[ 14.968017] pciback 0000:04:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xfdffe004)
[ 14.968268] pciback 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10)
[ 14.968491] pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100102)
[ 14.968857] xen: registering gsi 39 triggering 0 polarity 1
[ 14.968999] Already setup the GSI :39
[ 14.994377] pciback 0000:06:01.2: restoring config space at offset 0x4 (was 0x2100000, writing 0x2100112)
[ 14.994736] xen: registering gsi 38 triggering 0 polarity 1
[ 14.994878] Already setup the GSI :38
[ 15.021087] pciback 0000:06:01.1: restoring config space at offset 0x4 (was 0x2100000, writing 0x2100112)
[ 15.021449] xen: registering gsi 37 triggering 0 polarity 1
[ 15.021591] Already setup the GSI :37
[ 15.047884] pciback 0000:06:01.0: restoring config space at offset 0x4 (was 0x2100000, writing 0x2100112)
[ 15.048354] xen: registering gsi 33 triggering 0 polarity 1
[ 15.048510] xen: --> pirq=33 -> irq=33 (gsi=33)
[ 15.074540] pciback 0000:07:00.0: enabling device (0000 -> 0003)
[ 15.074727] xen: registering gsi 32 triggering 0 polarity 1
[ 15.074880] xen: --> pirq=32 -> irq=32 (gsi=32)
[ 15.101280] xen: registering gsi 47 triggering 0 polarity 1
[ 15.101440] xen: --> pirq=47 -> irq=47 (gsi=47)
[ 16.111150] pciback 0000:08:00.0: restoring config space at offset 0x3c (was 0x100, writing 0x10a)
[ 16.111407] pciback 0000:08:00.0: restoring config space at offset 0x10 (was 0x4, writing 0xfe200004)
[ 16.111648] pciback 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0x10)
[ 16.118667] pciback 0000:08:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100106)
[ 16.125810] xen: registering gsi 29 triggering 0 polarity 1
[ 16.132802] xen: --> pirq=29 -> irq=29 (gsi=29)
[ 16.164511] pciback 0000:0c:00.0: enabling device (0000 -> 0003)
[ 16.171551] xen: registering gsi 28 triggering 0 polarity 1
[ 16.178569] xen: --> pirq=28 -> irq=28 (gsi=28)
[ 16.211279] xen_pciback: backend is vpci
[ 16.218685] xen_acpi_processor: Uploading Xen processor PM info
[ 16.227147] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 16.235455] hpet_acpi_add: no address or irqs in _CRS
[ 16.242779] Linux agpgart interface v0.103
[ 16.250405] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 16.257595] Hangcheck: Using getrawmonotonic().
[ 16.264749] [drm] Initialized drm 1.1.0 20060810
[ 16.271831] [drm] VGACON disable radeon kernel modesetting.
[ 16.278843] [drm:radeon_init] *ERROR* No UMS support in radeon module!
[ 16.289120] brd: module loaded
[ 16.304487] loop: module loaded
[ 16.311756] ahci 0000:00:11.0: version 3.0
[ 16.318788] xen: registering gsi 19 triggering 0 polarity 1
[ 16.325724] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 16.332865] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 16.339875] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 16.349460] scsi0 : ahci
[ 16.356846] scsi1 : ahci
[ 16.364066] scsi2 : ahci
[ 16.371090] scsi3 : ahci
[ 16.377942] scsi4 : ahci
[ 16.384805] scsi5 : ahci
[ 16.391084] ata1: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff100 irq 127
[ 16.397439] ata2: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff180 irq 128
[ 16.403680] ata3: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff200 irq 129
[ 16.409862] ata4: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff280 irq 130
[ 16.415955] ata5: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff300 irq 131
[ 16.421994] ata6: SATA max UDMA/133 abar m1024@0xfddff000 port 0xfddff380 irq 132
[ 16.428069] tun: Universal TUN/TAP device driver, 1.6
[ 16.433920] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 16.439983] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 16.446035] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 16.452115] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 16.458065] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 16.464092] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 16.470024] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 16.475902] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 16.481866] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 16.487778] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 16.493613] xen: registering gsi 46 triggering 0 polarity 1
[ 16.499388] xen: --> pirq=46 -> irq=46 (gsi=46)
[ 16.505127] r8169 0000:0b:00.0: enabling Mem-Wr-Inval
[ 16.511209] r8169 0000:0b:00.0 eth0: RTL8168d/8111d at 0xffffc90000362000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 135
[ 16.517031] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 16.522924] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 16.528768] xen: registering gsi 51 triggering 0 polarity 1
[ 16.534552] xen: --> pirq=51 -> irq=51 (gsi=51)
[ 16.540339] r8169 0000:0a:00.0: enabling Mem-Wr-Inval
[ 16.546475] r8169 0000:0a:00.0 eth1: RTL8168d/8111d at 0xffffc90000364000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 136
[ 16.552412] r8169 0000:0a:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 16.558407] xen_netfront: Initialising Xen virtual ethernet driver
[ 16.564633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.570712] ehci-pci: EHCI PCI platform driver
[ 16.576849] xen: registering gsi 17 triggering 0 polarity 1
[ 16.582857] Already setup the GSI :17
[ 16.588850] QUIRK: Enable AMD PLL fix
[ 16.594738] ehci-pci 0000:00:12.2: enabling bus mastering
[ 16.600707] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 16.606980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 16.612962] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 16.619006] ehci-pci 0000:00:12.2: debug port 1
[ 16.625039] ehci-pci 0000:00:12.2: enabling Mem-Wr-Inval
[ 16.631003] ehci-pci 0000:00:12.2: irq 17, io mem 0xfddff400
[ 16.644435] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 16.650337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.656097] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.661895] usb usb1: Product: EHCI Host Controller
[ 16.667617] usb usb1: Manufacturer: Linux 3.16.0-rc2-20140626+ ehci_hcd
[ 16.673395] usb usb1: SerialNumber: 0000:00:12.2
[ 16.679677] hub 1-0:1.0: USB hub found
[ 16.685477] hub 1-0:1.0: 5 ports detected
[ 16.691734] xen: registering gsi 17 triggering 0 polarity 1
[ 16.697460] Already setup the GSI :17
[ 16.703196] ehci-pci 0000:00:13.2: enabling bus mastering
[ 16.708919] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 16.714621] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 16.720360] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 16.726268] ehci-pci 0000:00:13.2: debug port 1
[ 16.732358] ehci-pci 0000:00:13.2: enabling Mem-Wr-Inval
[ 16.738336] ehci-pci 0000:00:13.2: irq 17, io mem 0xfddff800
[ 16.747871] ata6: SATA link down (SStatus 0 SControl 300)
[ 16.754027] ata2: SATA link down (SStatus 0 SControl 300)
[ 16.754385] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 16.754461] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.754462] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.754464] usb usb2: Product: EHCI Host Controller
[ 16.754465] usb usb2: Manufacturer: Linux 3.16.0-rc2-20140626+ ehci_hcd
[ 16.754466] usb usb2: SerialNumber: 0000:00:13.2
[ 16.754754] hub 2-0:1.0: USB hub found
[ 16.754770] hub 2-0:1.0: 5 ports detected
[ 16.755198] xen: registering gsi 17 triggering 0 polarity 1
[ 16.755201] Already setup the GSI :17
[ 16.755226] ehci-pci 0000:00:16.2: enabling bus mastering
[ 16.755253] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 16.755447] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 16.755451] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 16.755471] ehci-pci 0000:00:16.2: debug port 1
[ 16.755554] ehci-pci 0000:00:16.2: enabling Mem-Wr-Inval
[ 16.755564] ehci-pci 0000:00:16.2: irq 17, io mem 0xfddffc00
[ 16.764372] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 16.764493] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.764496] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.764498] usb usb3: Product: EHCI Host Controller
[ 16.764501] usb usb3: Manufacturer: Linux 3.16.0-rc2-20140626+ ehci_hcd
[ 16.764503] usb usb3: SerialNumber: 0000:00:16.2
[ 16.765048] hub 3-0:1.0: USB hub found
[ 16.765068] hub 3-0:1.0: 4 ports detected
[ 16.765537] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 16.765555] ohci-pci: OHCI PCI platform driver
[ 16.765883] xen: registering gsi 18 triggering 0 polarity 1
[ 16.765887] Already setup the GSI :18
[ 16.765924] ohci-pci 0000:00:12.0: enabling bus mastering
[ 16.765949] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 16.766187] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 16.766403] ohci-pci 0000:00:12.0: irq 18, io mem 0xfddf7000
[ 16.821948] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.821949] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.821950] usb usb4: Product: OHCI PCI host controller
[ 16.821952] usb usb4: Manufacturer: Linux 3.16.0-rc2-20140626+ ohci_hcd
[ 16.821953] usb usb4: SerialNumber: 0000:00:12.0
[ 16.822246] hub 4-0:1.0: USB hub found
[ 16.822263] hub 4-0:1.0: 5 ports detected
[ 16.822664] xen: registering gsi 18 triggering 0 polarity 1
[ 16.822666] Already setup the GSI :18
[ 16.822689] ohci-pci 0000:00:13.0: enabling bus mastering
[ 16.822696] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 16.822924] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 16.822989] ohci-pci 0000:00:13.0: irq 18, io mem 0xfddfc000
[ 16.878460] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.878461] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.878463] usb usb5: Product: OHCI PCI host controller
[ 16.878464] usb usb5: Manufacturer: Linux 3.16.0-rc2-20140626+ ohci_hcd
[ 16.878465] usb usb5: SerialNumber: 0000:00:13.0
[ 16.878790] hub 5-0:1.0: USB hub found
[ 16.878804] hub 5-0:1.0: 5 ports detected
[ 16.879196] xen: registering gsi 18 triggering 0 polarity 1
[ 16.879198] Already setup the GSI :18
[ 16.879221] ohci-pci 0000:00:14.5: enabling bus mastering
[ 16.879228] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 16.879454] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 16.879522] ohci-pci 0000:00:14.5: irq 18, io mem 0xfddfd000
[ 16.935087] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.935089] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.935090] usb usb6: Product: OHCI PCI host controller
[ 16.935091] usb usb6: Manufacturer: Linux 3.16.0-rc2-20140626+ ohci_hcd
[ 16.935092] usb usb6: SerialNumber: 0000:00:14.5
[ 16.935383] hub 6-0:1.0: USB hub found
[ 16.935398] hub 6-0:1.0: 2 ports detected
[ 16.935724] xen: registering gsi 18 triggering 0 polarity 1
[ 16.935726] Already setup the GSI :18
[ 16.935749] ohci-pci 0000:00:16.0: enabling bus mastering
[ 16.935756] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 16.936031] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 16.936102] ohci-pci 0000:00:16.0: irq 18, io mem 0xfddfe000
[ 16.991760] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 16.991761] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.991763] usb usb7: Product: OHCI PCI host controller
[ 16.991764] usb usb7: Manufacturer: Linux 3.16.0-rc2-20140626+ ohci_hcd
[ 16.991765] usb usb7: SerialNumber: 0000:00:16.0
[ 16.992037] hub 7-0:1.0: USB hub found
[ 16.992051] hub 7-0:1.0: 4 ports detected
[ 16.992302] uhci_hcd: USB Universal Host Controller Interface driver
[ 16.992442] xen: registering gsi 48 triggering 0 polarity 1
[ 16.992444] Already setup the GSI :48
[ 16.992465] xhci_hcd 0000:09:00.0: enabling bus mastering
[ 16.992470] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 16.992614] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 8
[ 16.992775] xhci_hcd 0000:09:00.0: enabling Mem-Wr-Inval
[ 16.993517] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.993519] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.993520] usb usb8: Product: xHCI Host Controller
[ 16.993521] usb usb8: Manufacturer: Linux 3.16.0-rc2-20140626+ xhci_hcd
[ 16.993522] usb usb8: SerialNumber: 0000:09:00.0
[ 16.993854] hub 8-0:1.0: USB hub found
[ 16.993891] hub 8-0:1.0: 2 ports detected
[ 16.994077] xhci_hcd 0000:09:00.0: xHCI Host Controller
[ 16.994266] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 9
[ 16.996174] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 16.996182] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.996183] usb usb9: Product: xHCI Host Controller
[ 16.996184] usb usb9: Manufacturer: Linux 3.16.0-rc2-20140626+ xhci_hcd
[ 16.996185] usb usb9: SerialNumber: 0000:09:00.0
[ 16.996734] hub 9-0:1.0: USB hub found
[ 16.996786] hub 9-0:1.0: 2 ports detected
[ 16.997078] usbcore: registered new interface driver usblp
[ 16.997137] usbcore: registered new interface driver usb-storage
[ 16.997210] usbcore: registered new interface driver usbserial
[ 16.997230] usbcore: registered new interface driver cp210x
[ 16.997336] usbserial: USB Serial support registered for cp210x
[ 16.997380] usbcore: registered new interface driver cypress_m8
[ 16.997406] usbserial: USB Serial support registered for DeLorme Earthmate USB
[ 16.997425] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[ 16.997449] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[ 16.997481] usbcore: registered new interface driver mos7720
[ 16.997503] usbserial: USB Serial support registered for Moschip 2 port adapter
[ 16.997536] usbcore: registered new interface driver mos7840
[ 16.997559] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 16.997665] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 16.998319] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.998366] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 16.998799] mousedev: PS/2 mouse device common for all mice
[ 16.999497] rtc_cmos 00:02: RTC can wake from S4
[ 16.999963] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 17.000027] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[ 17.000296] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258)
[ 17.000298] ACPI: This conflict may cause random problems and system instability
[ 17.000298] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.000304] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 17.000390] ACPI Warning: SystemIO range 0x0000000000000b20-0x0000000000000b27 conflicts with OpRegion 0x0000000000000b20-0x0000000000000b2f (\SOR2) (20140424/utaddress-258)
[ 17.000391] ACPI: This conflict may cause random problems and system instability
[ 17.000391] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.000393] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 17.000720] lirc_dev: IR Remote Control driver registered, major 248
[ 17.000739] IR NEC protocol handler initialized
[ 17.000741] IR RC5(x) protocol handler initialized
[ 17.000743] IR RC6 protocol handler initialized
[ 17.000745] IR JVC protocol handler initialized
[ 17.000747] IR Sony protocol handler initialized
[ 17.000749] IR RC5 (streamzap) protocol handler initialized
[ 17.000751] IR SANYO protocol handler initialized
[ 17.000753] IR Sharp protocol handler initialized
[ 17.000755] IR MCE Keyboard/mouse protocol handler initialized
[ 17.000757] IR LIRC bridge handler initialized
[ 17.000759] cx25821: driver version 0.0.106 loaded
[ 17.000972] usbcore: registered new interface driver pvrusb2
[ 17.000973] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
[ 17.000974] pvrusb2: Debug mask is 31 (0x1f)
[ 17.001065] f71805f: Unsupported Fintek device, skipping
[ 17.001163] f71882fg: Found f71889ed chip at 0x600, revision 16
[ 17.001200] ACPI Warning: SystemIO range 0x0000000000000600-0x0000000000000607 conflicts with OpRegion 0x0000000000000605-0x0000000000000606 (\HMOR) (20140424/utaddress-258)
[ 17.001201] ACPI: This conflict may cause random problems and system instability
[ 17.001202] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.001356] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode
[ 17.001406] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode
[ 17.001450] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode
[ 17.137959] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 17.138031] sp5100_tco: PCI Revision ID: 0x41
[ 17.138088] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 17.138122] sp5100_tco: Last reboot was not triggered by watchdog.
[ 17.138288] sp5100_tco: initialized (0xffffc9000037ab00). heartbeat=60 sec (nowayout=0)
[ 17.138294] xen_wdt: Xen WatchDog Timer Driver v0.01
[ 17.138352] xen_wdt: cannot register miscdev on minor=130 (-16)
[ 17.138363] wdt: probe of wdt failed with error -16
[ 17.138924] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 17.139242] device-mapper: cache-policy-mq: version 1.2.0 loaded
[ 17.139244] device-mapper: cache cleaner: version 1.0.0 loaded
[ 17.139247] Bluetooth: Virtual HCI driver ver 1.4
[ 17.139349] Bluetooth: HCI UART driver ver 2.2
[ 17.139350] Bluetooth: HCI H4 protocol initialized
[ 17.139351] Bluetooth: HCI BCSP protocol initialized
[ 17.139352] Bluetooth: HCILL protocol initialized
[ 17.139353] Bluetooth: HCIATH3K protocol initialized
[ 17.139354] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[ 17.139393] usbcore: registered new interface driver bcm203x
[ 17.139429] usbcore: registered new interface driver bpa10x
[ 17.139461] usbcore: registered new interface driver bfusb
[ 17.139494] usbcore: registered new interface driver btusb
[ 17.139531] usbcore: registered new interface driver ath3k
[ 17.140240] hidraw: raw HID events driver (C) Jiri Kosina
[ 17.140547] usbcore: registered new interface driver usbhid
[ 17.140548] usbhid: USB HID core driver
[ 17.142195] xen: registering gsi 16 triggering 0 polarity 1
[ 17.142202] Already setup the GSI :16
[ 17.142339] xen: registering gsi 25 triggering 0 polarity 1
[ 17.142634] xen: --> pirq=25 -> irq=25 (gsi=25)
[ 17.142808] usbcore: registered new interface driver snd-usb-audio
[ 17.142838] usbcore: registered new interface driver snd-ua101
[ 17.142869] usbcore: registered new interface driver snd-usb-usx2y
[ 17.142918] usbcore: registered new interface driver snd-usb-caiaq
[ 17.142956] usbcore: registered new interface driver snd-usb-6fire
[ 17.142999] Netfilter messages via NETLINK v0.30.
[ 17.143010] nfnl_acct: registering with nfnetlink.
[ 17.143070] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 17.143364] ctnetlink v0.93: registering with nfnetlink.
[ 17.143883] xt_time: kernel timezone is -0000
[ 17.143922] ip_set: protocol 6
[ 17.143969] IPVS: Registered protocols ()
[ 17.144080] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 17.144151] IPVS: Creating netns size=1832 id=0
[ 17.151671] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 17.151678] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.151680] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 17.151681] sound hdaudioC0D2: mono: mono_out=0x0
[ 17.151682] sound hdaudioC0D2: dig-out=0x11/0x1e
[ 17.151683] sound hdaudioC0D2: inputs:
[ 17.151685] sound hdaudioC0D2: Front Mic=0x19
[ 17.151686] sound hdaudioC0D2: Rear Mic=0x18
[ 17.151687] sound hdaudioC0D2: Line=0x1a
[ 17.181000] random: nonblocking pool is initialized
[ 17.269597] IPVS: ipvs loaded.
[ 17.366343] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.366419] TCP: cubic registered
[ 17.366422] NET: Registered protocol family 17
[ 17.400997] usb 4-5: new full-speed USB device number 2 using ohci-pci
[ 17.560963] Bridge firewalling registered
[ 17.560993] Ebtables v2.0 registered
[ 17.561368] Bluetooth: RFCOMM TTY layer initialized
[ 17.561418] Bluetooth: RFCOMM socket layer initialized
[ 17.561452] Bluetooth: RFCOMM ver 1.11
[ 17.561480] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.561484] Bluetooth: BNEP filters: protocol multicast
[ 17.561497] Bluetooth: BNEP socket layer initialized
[ 17.561503] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 17.561515] Bluetooth: HIDP socket layer initialized
[ 17.561565] Key type ceph registered
[ 17.561722] libceph: loaded (mon/osd proto 15/24)
[ 17.562646] registered taskstats version 1
[ 17.564028] Btrfs loaded
[ 17.830935] usb 4-5: New USB device found, idVendor=0a12, idProduct=0001
[ 17.830937] usb 4-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 17.830939] usb 4-5: Product: EDRClassone
[ 18.106493] console [netcon0] enabled
[ 18.106512] ata5: SATA link down (SStatus 0 SControl 300)
[ 18.106649] ata4: SATA link down (SStatus 0 SControl 300)
[ 18.120600] netconsole: network logging started
[ 18.125488] rtc_cmos 00:02: setting system clock to 2014-06-26 08:50:55 UTC (1403772655)
[ 18.130763] ALSA device list:
[ 18.135694] #0: HDA ATI SB at 0xfddf8000 irq 16
[ 18.140770] #1: HDA ATI HDMI at 0xfe9fc000 irq 144
[ 18.264395] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 18.271053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.277769] ata3.00: ATA-8: ST2000DL003-9VT166, CC45, max UDMA/133
[ 18.283982] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 18.291154] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
[ 18.297428] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 18.304437] ata3.00: configured for UDMA/133
[ 18.311663] ata1.00: configured for UDMA/133
[ 18.319992] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 A20N PQ: 0 ANSI: 5
[ 18.329573] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.330513] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.332738] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC45 PQ: 0 ANSI: 5
[ 18.334486] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.334495] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 18.334699] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 18.335283] sd 2:0:0:0: [sdb] Write Protect is off
[ 18.335293] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 18.335619] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 18.360636] sdb: sdb1
[ 18.361612] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 18.394587] sd 0:0:0:0: [sda] Write Protect is off
[ 18.399762] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.404972] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 18.413082] sda: sda1 sda2 sda3
[ 18.419039] sd 0:0:0:0: [sda] Attached SCSI disk
[ 18.425334] Freeing unused kernel memory: 1088K (ffffffff82302000 - ffffffff82412000)
[ 18.431035] Write protecting the kernel read-only data: 18432k
[ 18.446083] Freeing unused kernel memory: 960K (ffff880001b10000 - ffff880001c00000)
[ 18.453264] Freeing unused kernel memory: 1760K (ffff880002048000 - ffff880002200000)
[ 18.501344] udevd[1571]: starting version 175
[ 19.782247] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 22.931093] udevd[1964]: starting version 175
[ 23.941453] ata3.00: configured for UDMA/133
[ 23.947915] ata3: EH complete
[ 24.009726] ata1.00: configured for UDMA/133
[ 24.017998] ata1: EH complete
[ 25.265678] ata1.00: configured for UDMA/133
[ 25.272178] ata1: EH complete
[ 25.397177] ata3.00: configured for UDMA/133
[ 25.397183] ata3: EH complete
[ 26.259928] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 38.853078] EXT4-fs (dm-0): re-mounted. Opts: barrier=1,errors=remount-ro
[ 48.121118] Adding 2097148k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097148k
[ 62.837960] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: barrier=1,errors=remount-ro
[ 64.469424] sysctl wrote to rmem_max when file position was not 0!
[ 64.469424] This will not be supported in the future. To silence this
[ 64.469424] warning, set kernel.sysctl_writes_strict = -1
[ 65.102326] r8169 0000:0a:00.0 eth1: link down
[ 65.102527] r8169 0000:0a:00.0 eth1: link down
[ 65.245777] r8169 0000:0b:00.0 eth0: link down
[ 65.245809] r8169 0000:0b:00.0 eth0: link down
[ 66.948163] r8169 0000:0b:00.0 eth0: link up
[ 67.669726] r8169 0000:0a:00.0 eth1: link up
[-- Attachment #3: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 8+ messages in thread