From: "Andreas Färber" <afaerber-l3A5Bk7waGM@public.gmane.org>
To: Javier Martinez Canillas
<javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Alessandro Zummo
<a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>,
Kukjin Kim <kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
Sjoerd Simons
<sjoerd.simons-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>,
Daniel Stone <daniels-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>,
Tomeu Vizoso
<tomeu.vizoso-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>,
Krzysztof Kozlowski
<k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Yadwinder Singh Brar
<yadi.brar01-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v5 12/14] clk: max77802: Add DT binding documentation
Date: Fri, 27 Jun 2014 09:52:48 +0200 [thread overview]
Message-ID: <53AD22D0.9000403@suse.de> (raw)
In-Reply-To: <1403806546-31122-13-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Am 26.06.2014 20:15, schrieb Javier Martinez Canillas:
> Add Device Tree binding documentation for the clocks
> outputs in the Maxim 77802 Power Management IC.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez-ZGY8ohtN/8rSCDK34cm6iQ@public.gmane.org.uk>
> ---
>
> Changes since v4: None
>
> Changes since v3:
> - Don't use the same clock driver name in clock-names since it's a consumer
> concept and most probably will be different. Suggested by Doug Anderson.
>
> Changes since v2:
> - Split the DT binding documentation in a separate patch.
>
> .../devicetree/bindings/clock/maxim,max77802.txt | 42 ++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
> new file mode 100644
> index 0000000..26bc4f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
> @@ -0,0 +1,42 @@
> +Binding for Maxim MAX77802 32k clock generator block
> +
> +This is a part of device tree bindings of MAX77802 multi-function device.
> +More information can be found in bindings/mfd/max77802.txt file.
> +
> +The MAX77802 contains two 32.768khz clock outputs that can be controlled
> +(gated/ungated) over I2C.
> +
> +Following properties should be presend in main device node of the MFD chip.
"present"
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: afaerber@suse.de (Andreas Färber)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 12/14] clk: max77802: Add DT binding documentation
Date: Fri, 27 Jun 2014 09:52:48 +0200 [thread overview]
Message-ID: <53AD22D0.9000403@suse.de> (raw)
In-Reply-To: <1403806546-31122-13-git-send-email-javier.martinez@collabora.co.uk>
Am 26.06.2014 20:15, schrieb Javier Martinez Canillas:
> Add Device Tree binding documentation for the clocks
> outputs in the Maxim 77802 Power Management IC.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
>
> Changes since v4: None
>
> Changes since v3:
> - Don't use the same clock driver name in clock-names since it's a consumer
> concept and most probably will be different. Suggested by Doug Anderson.
>
> Changes since v2:
> - Split the DT binding documentation in a separate patch.
>
> .../devicetree/bindings/clock/maxim,max77802.txt | 42 ++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
> new file mode 100644
> index 0000000..26bc4f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
> @@ -0,0 +1,42 @@
> +Binding for Maxim MAX77802 32k clock generator block
> +
> +This is a part of device tree bindings of MAX77802 multi-function device.
> +More information can be found in bindings/mfd/max77802.txt file.
> +
> +The MAX77802 contains two 32.768khz clock outputs that can be controlled
> +(gated/ungated) over I2C.
> +
> +Following properties should be presend in main device node of the MFD chip.
"present"
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
WARNING: multiple messages have this Message-ID (diff)
From: "Andreas Färber" <afaerber@suse.de>
To: Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Daniel Stone <daniels@collabora.com>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Yadwinder Singh Brar <yadi.brar01@gmail.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 12/14] clk: max77802: Add DT binding documentation
Date: Fri, 27 Jun 2014 09:52:48 +0200 [thread overview]
Message-ID: <53AD22D0.9000403@suse.de> (raw)
In-Reply-To: <1403806546-31122-13-git-send-email-javier.martinez@collabora.co.uk>
Am 26.06.2014 20:15, schrieb Javier Martinez Canillas:
> Add Device Tree binding documentation for the clocks
> outputs in the Maxim 77802 Power Management IC.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
>
> Changes since v4: None
>
> Changes since v3:
> - Don't use the same clock driver name in clock-names since it's a consumer
> concept and most probably will be different. Suggested by Doug Anderson.
>
> Changes since v2:
> - Split the DT binding documentation in a separate patch.
>
> .../devicetree/bindings/clock/maxim,max77802.txt | 42 ++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
> new file mode 100644
> index 0000000..26bc4f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
> @@ -0,0 +1,42 @@
> +Binding for Maxim MAX77802 32k clock generator block
> +
> +This is a part of device tree bindings of MAX77802 multi-function device.
> +More information can be found in bindings/mfd/max77802.txt file.
> +
> +The MAX77802 contains two 32.768khz clock outputs that can be controlled
> +(gated/ungated) over I2C.
> +
> +Following properties should be presend in main device node of the MFD chip.
"present"
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
next prev parent reply other threads:[~2014-06-27 7:52 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-26 18:15 [PATCH v5 00/14] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 01/14] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-27 9:21 ` Lee Jones
2014-06-27 9:21 ` Lee Jones
2014-06-27 9:32 ` Javier Martinez Canillas
2014-06-27 9:32 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 03/14] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-27 7:48 ` Andreas Färber
2014-06-27 7:48 ` Andreas Färber
2014-06-27 7:53 ` Javier Martinez Canillas
2014-06-27 7:53 ` Javier Martinez Canillas
2014-06-27 8:26 ` Andreas Färber
2014-06-27 8:26 ` Andreas Färber
[not found] ` <53AD2AB7.1090000-l3A5Bk7waGM@public.gmane.org>
2014-06-27 8:54 ` Javier Martinez Canillas
2014-06-27 8:54 ` Javier Martinez Canillas
2014-06-27 8:54 ` Javier Martinez Canillas
[not found] ` <1403806546-31122-4-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-07-01 17:30 ` Mike Turquette
2014-07-01 17:30 ` Mike Turquette
2014-07-01 17:30 ` Mike Turquette
2014-06-26 18:15 ` [PATCH v5 04/14] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
[not found] ` <1403806546-31122-5-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-07-01 17:29 ` Mike Turquette
2014-07-01 17:29 ` Mike Turquette
2014-07-01 17:29 ` Mike Turquette
2014-07-02 10:17 ` Javier Martinez Canillas
2014-07-02 10:17 ` Javier Martinez Canillas
2014-07-02 15:21 ` Mike Turquette
2014-07-02 15:21 ` Mike Turquette
2014-06-26 18:15 ` [PATCH v5 05/14] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-30 4:01 ` Yadwinder Singh Brar
2014-06-30 4:01 ` Yadwinder Singh Brar
2014-06-30 10:58 ` Javier Martinez Canillas
2014-06-30 10:58 ` Javier Martinez Canillas
[not found] ` <53B142F1.1050407-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-06-30 11:35 ` Russell King - ARM Linux
2014-06-30 11:35 ` Russell King - ARM Linux
2014-06-30 11:35 ` Russell King - ARM Linux
2014-06-30 16:00 ` Javier Martinez Canillas
2014-06-30 16:00 ` Javier Martinez Canillas
2014-07-01 17:26 ` Mike Turquette
2014-07-01 17:26 ` Mike Turquette
2014-07-02 10:13 ` Javier Martinez Canillas
2014-07-02 10:13 ` Javier Martinez Canillas
2014-07-02 10:19 ` Krzysztof Kozlowski
2014-07-02 10:19 ` Krzysztof Kozlowski
2014-06-26 18:15 ` [PATCH v5 06/14] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 07/14] mfd: Add driver for Maxim 77802 Power Management IC Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-07-01 15:15 ` Lee Jones
2014-07-01 15:15 ` Lee Jones
2014-07-01 15:55 ` Javier Martinez Canillas
2014-07-01 15:55 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 08/14] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-27 8:06 ` Andreas Färber
2014-06-27 8:06 ` Andreas Färber
2014-06-27 8:50 ` Javier Martinez Canillas
2014-06-27 8:50 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 09/14] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 10/14] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-27 9:26 ` Lee Jones
2014-06-27 9:26 ` Lee Jones
2014-06-27 9:42 ` Javier Martinez Canillas
2014-06-27 9:42 ` Javier Martinez Canillas
2014-06-27 9:42 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 11/14] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 12/14] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
[not found] ` <1403806546-31122-13-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-06-27 7:52 ` Andreas Färber [this message]
2014-06-27 7:52 ` Andreas Färber
2014-06-27 7:52 ` Andreas Färber
2014-06-27 7:55 ` Javier Martinez Canillas
2014-06-27 7:55 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 13/14] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-06-26 18:15 ` [PATCH v5 14/14] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
2014-06-26 18:15 ` Javier Martinez Canillas
2014-07-02 9:20 ` Tushar Behera
2014-07-02 9:20 ` Tushar Behera
2014-07-02 9:22 ` Javier Martinez Canillas
2014-07-02 9:22 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53AD22D0.9000403@suse.de \
--to=afaerber-l3a5bk7wagm@public.gmane.org \
--cc=a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=daniels-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org \
--cc=k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=sjoerd.simons-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org \
--cc=tomeu.vizoso-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org \
--cc=yadi.brar01-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.