Re: [meta-ti] Build of qtbase fails due to no OpenGL libraries, but completes after cleaning qtbase.

[Ulf Samuelsson <meta-arago@emagii.com>]

2014-07-02 22:26, Ulf Samuelsson skrev:
> 2014-07-02 21:34, Cooper Jr., Franklin skrev:
>>
>>> -----Original Message-----
>>> From: meta-arago-bounces@arago-project.org [mailto:meta-arago-
>>> bounces@arago-project.org] On Behalf Of Ulf Samuelsson
>>> Sent: Wednesday, July 02, 2014 2:23 PM
>>> To: Dmytriyenko, Denys
>>> Cc: meta-arago@arago-project.org
>>> Subject: Re: [meta-arago] Fwd: Fwd: Re: [meta-ti] Build of qtbase 
>>> fails due to
>>> no OpenGL libraries, but completes after cleaning qtbase.
>>>
>>> 2014-07-02 21:18, Denys Dmytriyenko skrev:
>>>> On Wed, Jul 02, 2014 at 09:13:16PM +0200, Ulf Samuelsson wrote:
>>>>> 2014-07-02 20:13, Denys Dmytriyenko skrev:
>>>>>> On Wed, Jul 02, 2014 at 08:05:09PM +0200, Ulf Samuelsson wrote:
>>>>>>
>>>>>>
>>>>>> On Wed, Jul 02, 2014 at 07:21:24AM +0200, Ulf Samuelsson wrote:
>>>>>>>> When I build an image with QT5 using meta-arago, qtbase fails with
>>>>>>>> a lot of error messages.
>>>>>>>> This is the wrong mailing list - meta-ti has nothing to do with 
>>>>>>>> qtbase.
>>>>>>>> Moreover, why are you still using 5.1.1? There were many fixes in
>>>>>>>> Qt5 5.2.x and 5.3.x. Also, it depends on your setup and what
>>>>>>>> layers and features you configure. Either way, it's a discussion
>>>>>>>> for a distro layer, you can use meta-arago mailing list for 
>>>>>>>> that...
>>>>>>> I looked through meta-arago and meta-qt5 about a month ago for
>>> compatability.
>>>>>>> I checked again today:
>>>>>>>
>>>>>>> meta-qt5/master    = 5.3.0
>>>>>>> meta-qt5/daisy    = 5.2.1
>>>>>>> meta-qt5/dora    = 5.1.1
>>>>>>>
>>>>>>> meta-arago/master = 5.2.0
>>>>>>> meta-arago/dora   = 5.2.0 (used to be 5.1.1)
>>>>>>> There is no meta-arago/daisy branch.
>>>>>>>
>>>>>>> The only revision I could find which was available in both was 
>>>>>>> 5.1.1.
>>>>>>> and that is why I used it.
>>>>>>>
>>>>>>> It would make sense if the qt5 related recipes in meta-arago 
>>>>>>> matched
>>> those in meta-qt5.
>>>>>>> Now meta-arago is using 5.2.0 which is not present in any branch of
>>>>>>> meta-qt5 (did not check old branches, only dora and daisy).
>>>>>>>
>>>>>>> I dont understand why the meta-arago:dora recipes for qt5 has been
>>>>>>> updated from 5.1.1 to 5.2.0, thus making it incompatible with meta-
>>> qt5:dora. Isn't this a mistake.
>>>>>> meta-qt5 for long time only had master, moreover, due to some
>>>>>> requirements, we needed latest 5.2 version of qt5, which was only
>>>>>> available from master and not from Dora, while meta-arago was
>>>>>> generally Dora based. Since then meta-qt5 was updated to 5.2.1, and
>>>>>> meta-arago has recently switched to Daisy - some cleanup is still 
>>>>>> going
>>> on...
>>>>> I think in order to clean up:
>>>>> 1) meta-arago:dora should switch back to 5.1.1
>>>>> 2) a daisy branch should be added to meta-arago (or daisy-devel)
>>>>> using 5.2.1
>>>>> 3) meta-arago:master should be 5.3.0
>>>>>
>>>>> 5.2.0 recipes should be deleted, or moved to an intermediate branch
>>>>> (daisy-rc1?)
>>>> No.
>>> So whats the plan?
>>> Does it make sense to have different version numbers in meta-arago, 
>>> than in
>>> meta-qt5?
>>>
>>> Is there a time schedule to have 5.2.1/5,3,0 support?
>> [Franklin] The way meta-qt5 and meta-arago works is indeed different 
>> compared to other layers. Meta-arago master tracks meta-qt5 master. 
>> Meta-arago dora tracks meta-arago daisy. I think we need to properly 
>> document this and even include it in the README file but of course 
>> work on daisy is still being done so it might just be on someone's 
>> short term todo list.
>>
>> Ulf,
>> Are you still having issues with Qt5 support when you use meta-qt5 
>> master?
> I have Beaglebone Black + LCD4 (from 4D systems) running
>
> meta-arago:dora (1 month old checkout using Qt-5.1.1)
> meta-qt5:dora
> linux_ti_staging-3.12.20
Think I was to quick here. Went back and rechecked.

According to Documentation, meta-arago is not yet compatible with daisy,
so I checked what support is available in meta-qt5:dora and this is 5.1.1.

I decided to use this version, and converted the existing 5.2.0 support 
in meta-arago:dora
to 5.1.1 and added to a "bugfix" layer which overrides meta-arago..

BR
Ulf

>
> Customer is currently developing on both AM335x and iMX6,
> and will make final selection later this year.
>
> Customer wants to be Yocto-1.6 compatible and is using QT 5.2.1 for 
> the iMX6 development.
> Would like to use the same or later for the Beaglebone Black.
>
> Mixing dora and daisy branches, if true is not intuitive.
>
> One issue which I need to investigate, is the colours.
> At boot, the Penguin appears with Blue feet, and not Yellow/Orange
> and the customer splash screen and applications also have the wrong 
> colour.
>
> I disabled the meta-arago psplash by
>
> BBMASK = "meta-arago-distro/recipes-core/psplash/"
>
> in 'local.conf' and there is no longer an '-arago' addition to the 
> version name.
>
> Have not had the time to study the issue further, but would appreciate 
> ideas.
>
>
>>> BR
>>> Ulf Samuelsson
>>>
>>> _______________________________________________
>>> meta-arago mailing list
>>> meta-arago@arago-project.org
>>> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
>
> _______________________________________________
> meta-arago mailing list
> meta-arago@arago-project.org
> http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago